A mosaic flower pot will add sparkle and life to your garden and can also be used in nearly any setting. Place a lively flower pot on a table to welcome guests to dinner or line your vegetable garden with mosaic flower pots. All you’ll need is a clean clay pot, tile and decorative items to create your mosaic design, mortar and grout.

Steps

  1. 1
    Choose/prepare your clay pot. Identify the pot you’d like to use and make sure its cleaned and ready to receive the glass tiles.
  2. 2
    Select your tile. Tile selection is extremely important as it will create the look and feel of your mosaic clay pot.
    Advertisement
  3. 3
    Create your mosaic tile. You will need work gloves, protective eyewear, a small hammer, a clear workspace and a heavy cloth or towel.
    • Lay tile on a flat surface and place towel or heavy cloth over the tile. This way you will have something to keep tile in one area when you break it.
    • Gently tap the tile with your hammer until you feel pieces breaking. Don’t smash the tile as it may disintegrate.
    • Remove tile to reveal what you’ve broken. Use a nipper to re-shape pieces if necessary or to complete the breaking process (for tile that may not have broken all the way).
  4. 4
    Prepare the mortar in order to adhere the tile to the flower pot. You’ll want to pick up polymer-fortified, thin-set mortar for best results.
    • Add water to mortar powder until it becomes the same consistency as peanut butter. Mix constantly so that the powder is fully integrated into the mixture.
    • Use mortar immediately so that it does not dry or change consistency over time. Only prepare the mortar when you are ready to create your mosaic design.
  5. 5
    Create your mosaic design by spreading a thin layer of mortar on the back of each tile piece and affixing the piece to the flower pot. Refer to your map or sketch if you created one before you started the project.
    • Press the piece of tile firmly against the flower pot and hold for several seconds or until you know it has adhered to the pot.
    • Leave ¼ inch space between pieces of tile to make room for the grout. Go back and re-size tile if pieces are too large or are not fitting properly.
    • Add any other design elements such as stones or beads to generate additional interest. You don’t have to add other elements but if do, now is the time to integrate them into your design.
    • Complete the design and then allow the pot to set and dry overnight. The mortar will need up to 24 hours to fully set and dry so leave the pot in a cool, dry area until its fully set.
  6. 6
    Make the grout once the mortar is completely set. If you’d like to add interest to the grey grout, mix with acrylic paint to create colored grout. You’ll need your work gloves for this project as you’ll be placing the grout on your pot with your hands.
    • Combine water to the grout to create a mixture of peanut butter consistency. You’ll want the general same type of consistency you achieved with the mortar.
    • Scoop a handful of grout and slather it all over the pot. Be sure you take care to fill in every section between the tiles.
    • Use a clean, damp cloth to wipe excess grout from the pot, taking extra care to remove grout that was smoothed over tile/stones.
    • Take a thin wire brush and brush over the entire pot when you’ve finished grouting to ensure all excess grout falls off the tiles. Go over the pot with a clean cloth to remove brush marks.
  7. 7
    Allow 2 hours to completely dry before flower pot can be use.
  8. Advertisement

Community Q&A

  • Question
    Can I use a plaster flower pot?
    Community Answer
    Community Answer
    Yes, you may use a plaster flower pot.
  • Question
    What do I do if the mortar dries before I get all the tiles onto the pot?
    Community Answer
    Community Answer
    Dispose of the dried mortar, and mix some new mortar to finish the pot. Never add water to dried out mortar.
  • Question
    Do I need to seal an outdoor pot?
    Community Answer
    Community Answer
    It's always a good idea to use grout sealer on any mosaic project that will be exposed to the elements.
Advertisement

Warnings

  • Be especially careful when breaking and handling tiles. Always wear protective glasses and gloves when breaking tile and be cognizant of sharp edges.
    ⧼thumbs_response⧽
Advertisement

About This Article

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 10 people, some anonymous, worked to edit and improve it over time. This article has been viewed 100,631 times.
182 votes - 93%
Co-authors: 10
Updated: March 8, 2022
Views: 100,631
Categories: Mosaic Projects
Advertisement