A tripod is an excellent tool for professional and amateur photographers alike. Eventually, however, you may need to replace the tripod head, either because the old one is worn out or you’re upgrading to a better type. Some people are in the dark about the process, but it’s actually very easy. In just a few minutes, you can take off your old tripod head and install a brand new one.

Part 1
Part 1 of 2:

Remove the Old Head

  1. 1
    Tighten the ball locking and center column knobs. You won’t be able to unscrew the tripod head if any parts are loose. Start by turning the ball locking knob on the head clockwise to lock the head in place. Then turn the center column knob, underneath the head, clockwise as well until it stops. Double check to make sure the tripod head isn’t moving.[1]
    • If your tripod or head have any more moving parts, lock them as well. Any loose parts might make it harder to remove the head.
  2. 2
    Hold the tripod by its center column with one hand. Use your non-dominant hand. Grab the tripod center column and hold it firmly.[2]
    • Some tripods don’t have a center column. If yours doesn’t, then grab it by one of the legs and hold it tightly.
    Advertisement
  3. 3
    Turn the tripod head counterclockwise to loosen it. With your other hand, grab the tripod head. Turn it counterclockwise to unscrew it. You may need to apply some pressure to get it started, since most people don’t replace the heads very often.[3]
    • If the tripod head doesn’t seem to be loosening, then some of the locking knobs might not be tight enough. Try double checking those and making sure they’re all locked in place.
  4. 4
    Pull the old head off when it unscrews. After just a few turns, the tripod head should pop off of the main body. Lift it off and put it aside.[4]
    • Hold on to the head as you’re unscrewing it. If it comes loose unexpectedly, you could drop it and break it.
  5. Advertisement
Part 2
Part 2 of 2:

Install the Replacement

  1. 1
    Assemble the new head if you have to. Some new tripod heads might come disassembled. In this case, follow the instructions provided to assemble the head correctly before you install it.[5]
    • Commonly, the camera mount isn’t installed on new heads. Simply loosen the knob next to the camera platform and slide the mount into position. Then tighten the knob to lock it in place.
  2. 2
    Lock your tripod at a comfortable height. You don’t want your tripod falling while you’re installing the new head, so make sure it’s locked. Set it to the height you want it at, then turn the center column knob clockwise to lock it in place.[6]
  3. 3
    Tighten the pan knob on the new head. Just like with removing the old head, all the parts on the new head need to be locked or it won’t screw on properly. Turn the pan knob clockwise until it stops to lock the head in place.[7]
    • If there are any other adjustment knobs on the new head, tighten them as well.
  4. 4
    Align the mounting screw on the tripod with the hole on the new head. Most tripods have a mounting screw coming up from the center column that the head attaches to. Hold the new head straight up and line the hole on the bottom up with this mounting screw.[8]
    • Make sure you keep the new head pointed directly up so it doesn’t screw on crooked.
    • Less commonly, some tripod heads have a screw coming out that goes into a slot on the tripod. In this case, you would insert the screw and tighten the tripod knob to lock the head in place.[9]
  5. 5
    Turn the head clockwise until it’s tight. Press the head onto the mounting screw and turn it to the right. Continue turning until you can’t tighten it anymore to lock it in place.[10]
    • Check under the head to make sure there's no space between the head and tripod mount. The 2 parts should fit snugly together. If there's any space, unscrew the head and reattach it.
  6. 6
    Test the new head by moving it around. Confirm that the new head is attached with a quick test. Loosen the pan knob and move the head around. The head should not unscrew or loosen while you move it around. Check to make sure it stays snug.[11]
    • If you have any problems, unscrew the head and try again. Make sure it stays completely upright as you're screwing it into position. If it's crooked, then it won't attach properly.
  7. Advertisement

Warnings

  • If there are any screws or bolts on the tripod head, don’t remove them. The head could fall apart without all the pieces attached.[12]
    ⧼thumbs_response⧽
Advertisement

About This Article

wikiHow Staff
Co-authored by:
wikiHow Staff Writer
This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. This article has been viewed 17,257 times.
5 votes - 100%
Co-authors: 3
Updated: July 28, 2022
Views: 17,257
Categories: Cameras
Advertisement