An easy way to update an old dress is to shorten it. You can shorten a dress just a little or take it up several inches for a totally new look. For most dresses, shortening the hem is something you can do yourself. However, there are some types of dresses that will require a professional’s touch.

Part 1
Part 1 of 3:

Identifying the New Hem

  1. 1
    Get a dress that is already the length you want. Using a dress that is already the length that you would like to shorten your dress to is an easy way to ensure that you will get a good result. Check your closet for dresses that are the ideal length to use as a guide.[1]
    • Try to find a dress with a similar cut to your dress as well. For example, if your dress has an A-line skirt, then try to find another dress with an A-line skirt that you can use as a guide.
  2. 2
    Measure the length if you do not have a dress to use as a guide. If you do not have a dress that is the length you want, then you can also try on the dress and use a measuring tape to find the length you want. Do this while you are standing up. Extend the measuring tape from your natural waist to the place you want the hem to end and mark the length using a piece of chalk. Then, repeat this all the way around using the same measurement.
    • If you have a friend who can help you, then you might also ask them to do this for you. It can be difficult to get the measurements while you are also wearing the dress.
    Advertisement
  3. 3
    Trace the hemline. When you have identified the length you want, you will need to trace the new hemline onto your dress. If you are using a dress as a guide, then lay it over the top of your longer dress and use a piece of chalk to trace the hemline of the shorter dress.[2] If you are using the chalk marks you made while wearing the dress, then you can just connect these marks.
    • If you are using another dress as a guide, then make sure that the two dresses are lined up at the shoulders. This will help to ensure that your new hem will be the same length as the one on your other dress.
  4. 4
    Measure 1” (2.5cm) from the line for seam allowance. You will need to cut your new hem a little lower than the chalk line you made on your dress. This is because you will be folding the fabric up and sewing to cover the raw edges of the fabric.[3] To make room for the hem fold, measure 1” (2.5 cm) from the line you marked on the dress and draw a new chalk line that is parallel to it.[4]
    • Mark the distance from the line in a few different places to ensure that you get an even line.
  5. Advertisement
Part 2
Part 2 of 3:

Creating the New Hem

  1. 1
    Cut along the second line with a pair of scissors. After you have marked the fabric, cut along the seam allowance to remove the excess fabric.[5] [6] Make sure to cut right along the line you have marked, and not inside or outside of it. Cut as evenly as possible with the scissors.
  2. 2
    Fold the fabric under and pin it in place. Next, you will need to secure the hem fabric under the dress using pins. Fold about ½” (1.3 cm) of the fabric under so that the raw edges of the dress are lined up with the first chalk line that you made along the hem. Pin the edges under all the way around the dress.[7]
  3. 3
    Sew around the edges. After you have pinned the edges in place, you will need to sew around the edges of the fabric to secure the hem. Sew a straight stitch along the folded edge to secure the hem.[8] Make sure that you sew through both layers of fabric to secure the raw edge of the fabric to the underside of the dress.[9]
    • Remove the pins as you sew.
    • After you finish sewing the hem, cut the excess threads and try on your new shortened dress!
  4. Advertisement
Part 3
Part 3 of 3:

Getting the Best Results

  1. 1
    Consider the difficulty of the project. You can probably hem most dresses on your own as long as the dress is a simple design with fabric that is easy to work with. However, some dresses may be difficult to hem on your own. Dresses that are made from delicate fabrics, include beaded embellishments, flare out significantly, or have multiple layers may be difficult to hem. For dresses that pose these kinds of challenges, consider hiring a seamstress.[10]
  2. 2
    Ask a friend to help you. If you are using an existing dress, then you do not have to worry about putting the dress on. However, if you want to ensure that the dress is going to end at a certain place on your body, then you will need to put it on and measure it. Getting the measurements just right for shortening your dress will be easier if you have someone to help you, so ask a friend to help you.
  3. 3
    Iron your hem before you sew it. To ensure that your hem will be flat and straight, you may want to flatten it with an iron. To iron your hem, pin it in place, and then remove a few pins at a time to iron the hem in sections. Replace the pins after you finish ironing each section.[11]
    • Keep going until you have ironed all the way around your hem, and then sew your hem.
  4. Advertisement

Expert Q&A

  • Question
    How do you shorten a dress with false folds?
    Alessio Iadicicco
    Alessio Iadicicco
    Apparel Manufacturing Specialist
    Alessio Iadicicco is an Apparel Manufacturing Specialist and the CEO and Co-Founder of MarkersValley, an online apparel and manufacturer sourcing platform that connects luxury fashion brands to a network of highly-vetted, truly Italian manufacturers. He holds a Bachelor's degree in Economy and Management of Financial Enterprises from The University of Naples Federico II. MarkersValley has connected fashion brands in over 100 countries and has a network of over 100 independent Italian factories and artisans. MarkersValley has been featured in Forbes, EQ, St. Louis Business Journal, Il Mattino, and Corriere Della Sera.
    Alessio Iadicicco
    Apparel Manufacturing Specialist
    Expert Answer
    If your dress has false folds, iron them down before you start shortening the dress.
  • Question
    How can you cut a dress to make it shorter?
    Alessio Iadicicco
    Alessio Iadicicco
    Apparel Manufacturing Specialist
    Alessio Iadicicco is an Apparel Manufacturing Specialist and the CEO and Co-Founder of MarkersValley, an online apparel and manufacturer sourcing platform that connects luxury fashion brands to a network of highly-vetted, truly Italian manufacturers. He holds a Bachelor's degree in Economy and Management of Financial Enterprises from The University of Naples Federico II. MarkersValley has connected fashion brands in over 100 countries and has a network of over 100 independent Italian factories and artisans. MarkersValley has been featured in Forbes, EQ, St. Louis Business Journal, Il Mattino, and Corriere Della Sera.
    Alessio Iadicicco
    Apparel Manufacturing Specialist
    Expert Answer
    Fold the dress in half length-wise and secure it with pins. Then, decide how many centimeters or inches you'd like to shorten your dress, leaving at least 3 cm (1.2 in) for the hem. Cut off your desired amount excess fabric and sew it with a straight, simple stitch that will hold the fabric in place. At this point, iron the new hem fold and sew everything back together.
  • Question
    When I let out the hem as my daughter gets taller, will the holes from the previous sewing be visible?
    Community Answer
    Community Answer
    It depends on how far apart your stitches are and the size of the needle. The wider the stitches and thinner the needle, the better.
Advertisement

Things You’ll Need

  • Dress to shorten
  • Dress to use as a guide (if available)
  • Measuring tape
  • Chalk
  • Scissors
  • Pins
  • Sewing machine
  • Thread
  • Iron (optional)

About This Article

Alessio Iadicicco
Co-authored by:
Apparel Manufacturing Specialist
This article was co-authored by Alessio Iadicicco. Alessio Iadicicco is an Apparel Manufacturing Specialist and the CEO and Co-Founder of MarkersValley, an online apparel and manufacturer sourcing platform that connects luxury fashion brands to a network of highly-vetted, truly Italian manufacturers. He holds a Bachelor's degree in Economy and Management of Financial Enterprises from The University of Naples Federico II. MarkersValley has connected fashion brands in over 100 countries and has a network of over 100 independent Italian factories and artisans. MarkersValley has been featured in Forbes, EQ, St. Louis Business Journal, Il Mattino, and Corriere Della Sera. This article has been viewed 122,309 times.
17 votes - 71%
Co-authors: 5
Updated: February 16, 2022
Views: 122,309
Categories: Sewing Dresses
Article SummaryX

To shorten a dress, start by putting it on and using a measuring tape to measure the length you want it to be. Use chalk to mark your desired length in a few different places and draw a straight line around the dress to connect the marks. Draw a second line an inch below the first to give you an allowance for the seam. Once you’ve marked your hem on the dress, cut along the second line with a pair of scissors. After you’ve cut the new hem, fold the fabric about ½ inch under so that the raw edge lines up with the first chalk line you made, and pin it in place. When you’ve pinned the new hem, sew a straight stitch along the folded edge to finish your dress. For more tips, including how to use another dress as a guide for your length, read on!

Did this summary help you?
Advertisement