In an emergency situation, such as when someone falls onto the tracks or if there’s an obstruction ahead of the train, activating the emergency brakes can be the difference between life and death. The emergency brakes work by simultaneously cutting off the train’s engine and applying the maximum brake force, and are much more powerful than the train’s standard brakes. Modern trains have emergency brakes that passengers can activate from a special compartment or pull cord in the passenger car. There are also a few ways you can signal to a train’s operator that danger is ahead and they need to apply the emergency brakes. A moving train can take up to 1 mile (1.6 km) to come to a stop, so the sooner you can apply the brakes in an emergency, the better!

Method 1
Method 1 of 2:

Applying the Emergency Brakes

  1. 1
    Look for a cover labeled “Emergency Brake” and open it up. Modern trains feature access panels in the passenger cars so passengers can activate the emergency brakes in the event of an emergency. Look for a cover on the wall that’s labeled “Emergency Brake.” Open up the cover to expose the button that activates the brakes.[1]
    • Opening the cover will set off an alarm, so don’t access the panel unless you plan to activate the brakes.
  2. 2
    Check for a brake cord with a red handle if there isn’t a button. Some older trains won’t have a covered panel that you can access to apply the brakes, but they will have a pull cord that activates them. Look near the wall for a hanging cord with a red handle to find the emergency brakes.[2]
    Advertisement
  3. 3
    Activate the brakes by pressing the button or pulling the cord. "Only use the emergency brakes on a train if there’s an imminent threat to somebody’s life or limb." [3] If someone is caught in the train’s doors or there’s an obstruction on the tracks, push the brake button or pull the cord to activate the emergency brakes. Remember that activating the brakes for no reason could land you with a hefty fine or even jail time.[4]
    • If the train has a cord and handle, pull it really hard to make sure it activates the brakes.
  4. 4
    Avoid activating the brakes for crime or medical emergencies. Allow the train to continue traveling to the next station, where emergency responders will be able to address the issue. Hitting the emergency brakes because of a crime or a medical emergency will only make it harder for responders to get to the train to help.
  5. Advertisement
Method 2
Method 2 of 2:

Signaling to a Train to Stop

  1. 1
    Wave a red flag at the train to signal for it to stop. Waving a red flag at a train is a universal signal for it to stop. If there’s a threat to the train, such as an obstruction or person on the tracks ahead of it, wave a red flag vigorously at it to signal to the operator that they need to apply the emergency brakes.[5]
    • If you don’t have a red flag, try using a red shirt or some red fabric.
    • Try to signal the train to stop as far away from the threat as possible so it has more time to slow down and stop.
  2. 2
    Swing your arm at a right angle to the track if you don’t have a flag. If you don’t have a flag, stand next to the tracks and face the oncoming train. Use your arm closest to the track to swing back and forth at a right angle to the track to signal for the train to stop.[6]
    • Keep your opposite arm still at your side.
    • Use only 1 arm to signal so the message is clear.
  3. 3
    Shine a red light at the train if it’s nighttime. If it’s too dark for the train operator to see your signals, shine a red light back and forth at the oncoming train. If you don’t have a red light, use any other color so the operator can tell you’re trying to convey a message. Wave the light back and forth in rapid motions to get the operator’s attention.[7]
    • You can use a standard light if you don’t have any other options, but be sure to wave it back and forth vigorously so the operator can tell you’re signaling to them.
  4. 4
    Press the emergency stop button inside the station or at the railroad crossing. On some systems like BART or some nations like Japan, every station or level crossing has an emergency stop or emergency deenergize button. This will immediately cut all electrical power to the train and signal to the operator to stop. Since there is no electricity, the train's emergency brakes will automatically engage.
  5. 5
    Use any object and wave it violently as a last resort to get the operator’s attention. If you have nothing else, use a shirt, shoe, hat, or anything else you have to send a signal to the train’s operator. Wave it over your head violently and frantically so they can tell you’re trying to signal a threat and that they need to stop the train.[8]
    • Shout, jump up and down, and do anything else you can think of to alert the operator.
  6. 6
    Call the railroad dispatcher to tell them about any threats to oncoming trains. If there’s a threat to an oncoming train, such as damage to the tracks or an obstruction, call the railroad dispatcher to tell them about it so they can alert the train operators. Look up the number for the local railroad dispatch, or check to see if any of the railroad signs include the phone number. The dispatcher will be able to contact the train’s operator to alert them to the danger so they can hit the emergency brakes.[9]
    • Railroad dispatchers can even activate a train’s emergency brakes remotely if they can’t get in touch with the operator.
  7. Advertisement

Community Q&A

  • Question
    How do I stop a freight train?
    Community Answer
    Community Answer
    Follow the same methods listed above. But be cautious, as a freight train with a hundred cars can take up to a mile to stop.
  • Question
    What if I fail to stop the train and die in the derailment?
    Community Answer
    Community Answer
    Then there is nothing that can be done. You should still attempt to stop the train, as it is better to at least try.
  • Question
    What happens when a passenger pulls the emergency stop? Does it stop automatically or notify the driver?
    Hugo Billiau
    Hugo Billiau
    Community Answer
    All trains have mechanical air-pressure operated brakes. The air pressure holds them up off the wheels. Without air pressure, they fall down. On such old trains, pulling the cord or pressing the button will open a valve and cause the air pressure to release immediately. On modern trains, the driver is alerted of an emergency and the brakes begin to apply, but the driver can override this if it is unsafe to stop, such as a viaduct or tunnel. Once the danger is passed, the driver will stop the train.
Advertisement

Warnings

  • If there’s a fire on the train, move to another car and alert the crew.
    ⧼thumbs_response⧽
  • Do not activate the train’s emergency brakes for a fire, crime, or a medical emergency. You could make it more difficult for emergency responders to get to the train to help.[10]
    ⧼thumbs_response⧽
Advertisement

About This Article

wikiHow Staff
Co-authored by:
wikiHow Staff Writer
This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. This article has been viewed 39,055 times.
6 votes - 83%
Co-authors: 32
Updated: January 24, 2023
Views: 39,055
Categories: Train Travel
Advertisement