This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards.
There are 8 references cited in this article, which can be found at the bottom of the page.
wikiHow marks an article as reader-approved once it receives enough positive feedback. This article received 18 testimonials and 90% of readers who voted found it helpful, earning it our reader-approved status.
This article has been viewed 316,491 times.
Learn more...
Mollies are an ideal choice of live bearing fish (i.e. they don't lay eggs) to place in a community aquarium or fish tank. For the most part, mollies are very easy to breed. A single female can produce over one hundred baby mollies, also called fry, in one live birth. They also come in a variety of colors, and work well with a wide community of other fish. Prepare your tank and yourself beforehand, and breeding mollies should be a breeze.
Steps
Creating a Beneficial Breeding Environment for Mollies
-
1Allow the fish to mate with one another. Mollies are hierarchical fish. Whichever male has the biggest fins and boldest colors leads the way. This means the ideal combination of male and female fish is one male for multiple females. [1]
- You may see the male under the female; this is how the fish copulate.
- If their mating is successful, their babies should be born in about 3 to 5 weeks.
-
2Remove the female from the aquarium before birthing begins. Place the female in a separate “nurser” tank if possible. The male fish often chases around the female, wishing to copulate more, and this could cause stress on the pregnancy. [2] You’ll be able to tell the molly is pregnant by a very distended belly.
- If the “nurser” tank is not possible, consider using an aquarium net breeder, which is essentially a mesh cube with plastic edges, to protect the mother and baby fish.[3]
- Removing the mother from the main aquarium is also to protect the fry. Molly fish often cannibalize their babies.
- Don’t wait too close to the birth date. Stressed mollies may have more aborted births and stillborn.[4]
Advertisement -
3Reintroduce the female into the main aquarium. The female may eat her own young, so it’s best to move her back with the other fish for the safety of the fry. [5] Roughly once per month, however, the mother may need to be re-segregated since female molly fish can retain multiple fertilized eggs for nearly half a year. [6]
Caring for the Fry
-
1Feed the fry. Use ground fish food of the same type that you feed to your adult mollies. Flake food should be used as a primary base. Supplement the normal meals with a broad variety of denser meals. [7]
- Various worms are great for molly fish. Grindal worms, black worms, and blood worms work well.
- Brine shrimp, live or frozen, are a preferred source of food.
- Molly fish even eat algae, which is their primary food in the wild.[8]
-
2Wait for the fish to mature. It will take around nearly two months to be able to tell males and females apart. Once they’ve doubled in size, it’s probably safe to introduce them into the main tank with the rest of the fish. [9]
- Another good way to tell if they’re safe to interact with the other fish is if they are too big to fit into the other fishes mouths.[10]
-
3Separate the males and the females. Once you know the gender of the mollies, you'll need to ensure more breeding doesn't take place. They will, in fact, breed between brothers and sisters. Try to separate the male and female fish before they are eight weeks old, which is when they reach sexual maturity.[11]
Ensuring You Have the Right Setup to Breed Mollies
-
1Purchase an aquarium/tank. You'll need a tank that holds around 15g – 30g water (56L-113L). In general, molly fish do better with larger fish tanks and more room to swim around. Smaller tanks may create a variety of problems:[12]
- Less swimming room to get away from aggressive fish, which creates stress
- Harder to clean, which can lead to sickness
-
2Place any decorations in the aquarium. Choose such decorations as rocks, air filters and decorative gravel. In general, molly fish should have enough room to swim around quite freely, but also enough decorations to hide from bully fish. The less aggressive fish will more around in the tank to hide from bully fish.[13] If there aren’t enough hiding spots, the fish could become stressed.
-
3Anchor freshwater plants below the substrate. The substrate should provide the base to your tank, but also serve potential nutrients to any plants inside the aquarium. In general, the substrate should be comprised of two levels:
- The top level should be 2 inches of something sturdy, like sand, pebbles, or gravel.
- The bottom level should be 1-2 inches of nutrient-rich material.[14]
-
4Fill the tank with water near the top. Up to 2 inches (4cm) under the brim of the tank is ideal. The water should be warm – 78-82° F (25-27° C) – so the molly fish are comfortable, like they would be in tropical waters. Do not overfill the tank or put in cold water.
- An aquarium heater will probably be necessary.
- Replace water on a fairly regimented schedule. Daily minimal water changes, or up to 30% per week, are recommend.[15]
-
5Avoid aquarium salt. Some molly fish are brackish, which means they have a varying requirement for freshwater and saltwater.[16] There is a fairly large debate, however, about whether or not they need marine salt in the aquarium. Some experts contend most molly fish never see salty or brackish waters, and it’s not necessary for the water.[17]
- Some sources indicate that approximately one Tbsp per five gallons of water is good.[18]
- The addition of salt may act as a healing attribute, a way to overcome slightly dirty water.[19]
- If you buy an exotic breed of molly, you may want to consult with an expert to be sure you can go completely without salt.
-
6
-
7Allow the tank to cycle before adding the fish. It is best to allow the tank to cycle, because the water is lacking beneficial bacteria, which leaves fish susceptible to illness and disease. Carefully monitor your aquarium if you can't wait before adding your fish.
-
8Choose how many mollies you want. Generally, a good fit for the fish is a couple mollies per 10 gallon tank. They need ample room to swim around and, if you end up with multiple fry, room to hide from the more aggressive fish. If you want more than just a couple, you should use the recommended larger tank.
-
9Purchase your mollies. Go to your local pet store and pick male and female fish. While there are several varieties of molly fish, they are extremely easy to breed because all colors are the same species, and all males and females breed with one another.[22] Some recommend getting the subspecies of mollies for quicker breeding. You can ask the employees at the store for help, or you can do it yourself.
- Male molly have a gonopodium, a long stick-like fin used to fertilize the female, on his lower half.[23]
- Female molly have a softer, fan-shaped anal fin, which is also on the lower half of the body.
-
10Transfer your fish to the tank. Set the bag of fish in the tank for 10-15 minutes, to allow the water to become the same temperature. Release the fish into the aquarium/tank by using a net to get the fish from the bag.[24]
- Do not introduce the water from the bag into the tank.
- Feed the other fish before adding in the new mollies. You don’t want them to think the mollies are food.[25]
Community Q&A
Did you know you can get answers researched by wikiHow Staff?
Unlock staff-researched answers by supporting wikiHow
-
QuestionDo molly fish eat their own babies?wikiHow Staff EditorThis answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
Staff AnswerwikiHow Staff EditorStaff Answer -
QuestionWhat is the life expectancy of a molly fish?wikiHow Staff EditorThis answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
Staff AnswerwikiHow Staff EditorStaff Answer -
QuestionDo balloon mollies eat their young?debanshu biswasCommunity AnswerYes. It is best to separate the mother whenever spawning ends.
Warnings
- Ensure that the fish won't overheat, or the water freeze when you are taking the mollies home. Don't let them sit for too long in the plastic bag before releasing them into the aquarium.⧼thumbs_response⧽
- Do not get two males for a small tank or they will fight.⧼thumbs_response⧽
References
- ↑ http://www.molly-fish.com/
- ↑ http://www.molly-fish.com/
- ↑ http://aquariumfish.net/information/raising_baby_fish.htm
- ↑ http://www.myaquariumclub.com/an-in-depth-look-at-molly-fish-1524.html
- ↑ http://www.molly-fish.com/
- ↑ http://aquariumfish.net/information/raising_baby_fish.htm
- ↑ http://www.molly-fish.com/
- ↑ http://aquariumfish.net/information/raising_baby_fish.htm
- ↑ http://aquariumfish.net/information/raising_baby_fish.htm
- ↑ http://www.myaquariumclub.com/an-in-depth-look-at-molly-fish-1524.html
- ↑ http://www.myaquariumclub.com/an-in-depth-look-at-molly-fish-1524.html
- ↑ http://aquariumfish.net/information/raising_baby_fish.htm
- ↑ http://www.molly-fish.com/
- ↑ http://www.algone.com/substrate-for-aquariums
- ↑ http://www.afae.it/pages/tematica/articolipoecilidi/The_great_molly%20salt_debate.htm
- ↑ http://www.liveaquaria.com/product/aquarium-fish-supplies.cfm?c=954
- ↑ http://www.afae.it/pages/tematica/articolipoecilidi/The_great_molly%20salt_debate.htm
- ↑ http://aquariumfish.net/information/raising_baby_fish.htm
- ↑ http://www.afae.it/pages/tematica/articolipoecilidi/The_great_molly%20salt_debate.htm
- ↑ http://www.molly-fish.com/
- ↑ http://www.liveaquaria.com/product/aquarium-fish-supplies.cfm?c=954
- ↑ http://aquariumfish.net/information/raising_baby_fish.htm
- ↑ http://www.livescience.com/249-endowed-fish-girls.html
- ↑ http://www.hartz.com/how-to-introduce-new-fish-into-your-aquarium-tank/
- ↑ http://www.hartz.com/how-to-introduce-new-fish-into-your-aquarium-tank/
About This Article
To breed molly fish, start by setting up a 15-30 gallon tank for them that includes decorations, a substrate, and freshwater plants. Then, purchase male and female molly fish so you have no more than 2 fish per 10 gallons of tank space. After you introduce the fish to the tank, wait for them to mate. When you notice a female fish with a bloated belly, transfer it to a different tank before it gives birth to protect it and its fry. Finally, after the female gives birth in 3-5 weeks, transfer it back to the main tank and keep the fry separated. To learn how to take care of molly fry, scroll down!