wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 18 people, some anonymous, worked to edit and improve it over time.
This article has been viewed 215,477 times.
Learn more...
It is important to clean your pipe regularly so that old residue does not affect the flavor of your product. Follow these steps to care for and clean your pipe to ensure it achieves its full potential.
Steps
Cleaning a Tobacco Pipe
-
1Empty out any ash and leftover tobacco in the bowl. You can do this by tapping or using a special scoop just for this purpose.[1] Blow through the mouthpiece a bit to expel anything that remains.
-
2Remove the stem or mouthpiece. This may require a slight tug or turn.[2]Advertisement
-
3Clean the stem with a pipe cleaner. Run a pipe cleaner back and forth through the stem to clean it.[3]
-
4Clean the shank with the pipe cleaner. Run a pipe cleaner back and forth through the opening where the stem connects and down into the bowl. Keep cleaning until all of the residue is removed.
- Use a cleaning solution if you want to but it is not necessary. If using a cleaning solution, stuff a paper towel into the bowl to keep extra fluid from running out and ruining the outside of your pipe.
- You can double the pipe cleaner as well, once the ends are dirty, to make sure you get the most use out of it.
-
5Use the pipe cleaner to gently clean the bowl. Double a pipe cleaner and gently run it around the sides and bottom of the bowl. You want to remove some of the built-up cake on the sides but not all.[4]
- You can also use Q-tips if you want to.
-
6Clean the rim with a cotton swab. Get some spit on a cotton swab and rub it firmly around the rim to clean any residue off of there.
-
7Shine your pipe with olive oil. Some people think this is necessary, others don't like it. Do whatever you prefer.
-
8Clean your pipe regularly. Don't leave it until it gets really awful: clean your pipe regularly![5]
Cleaning a Glass Pipe
-
1Pour salt into the bowl and mouthpiece. Epsom salt is good but table salt works too.
-
2Put the pipe in a small container. This container should be as close as possible to the size of the pipe. It should also need to be fairly sturdy (not made of super cheap plastic) because you will be putting harsh chemicals or very hot water into it.
-
3Pour in rubbing alcohol, vinegar, or mouthwash. Now, which cleaning solution you should use is a matter of debate. Rubbing alcohol works great but it can destroy the colors of your pipe or possibly leave unhealthy residues. Alternatively, you can use vinegar or Listerine and mix it with very hot water. Whatever you use, pour the mix into the container.
-
4Let your pipe soak for 5 minutes. Swish it around and let it soak for at least 5 minutes.
-
5Rinse your pipe thoroughly with water. Take it out of the cleaning solution and rinse it really thoroughly with hot water. Be careful not to drop your pipe while rinsing.
-
6Clean off any remaining residue with pipe cleaners or a cotton swab. Use pipe cleaners, Q-tips, and paper towels to remove any remaining residue.
-
7Repeat as necessary. If you haven't cleaned your pipe in a long time, it may take two or three rounds of this process before it is completely clean. Clean your pipe regularly to avoid this.
- Make sure your pipe is thoroughly rinsed before smoking with it!
Things You'll Need
- 1 Pipe
- 1 Pack of Pipe Cleaners
- 1 Pipe Knocker
- 1 bottle cleaning solvent
- 1 bottle metal polish
- 1 bottle briar pipe wipe
- 2 cloths
- 1 pipe tool
References
- ↑ https://www.pipesandcigars.com/faq/cleaning-your-pipe/1818104/
- ↑ https://www.pipesandcigars.com/faq/cleaning-your-pipe/1818104/
- ↑ https://www.civilized.life/articles/best-ways-to-clean-a-wooden-hand-pipe/
- ↑ https://www.civilized.life/articles/best-ways-to-clean-a-wooden-hand-pipe/
- ↑ https://www.smokingpipes.com/information/howto/cleaning.cfm
- http://smokingpipes.com/information/howto/cleaning.cfm
- https://pipedia.org/index.php?title=Pipe_care/cleaning
About This Article
You should clean your tobacco pipe after every use. To do so, let the pipe cool, then tap it to get rid of any ash and tobacco from the bowl. Next, remove the mouthpiece by tugging or turning it before running a pipe cleaner through it. Then, put 2 pipe cleaners into the shank, and keep cleaning down to the bowl until you've cleared all the residue. Clean the bowl by gently rubbing around the sides with 2 pipe cleaners. Finally, rub a wet a Q-tip around the rim to get rid of residue. To finish, polish your pipe with olive oil. If you want to learn how to clean a marijuana pipe, keep reading the article!