Most graphite, carbon fiber, or fiberglass fishing rods are so strong you can fight a big fish with a light rod, but so fragile a nick can lead to breakage. If you know how to maintain a fishing rod, you can extend the life of your rod, keep the fishing line from breaking mid-fight, and keep the rod's performance at the optimal level.

Method 1
Method 1 of 2:

Maintaining the Rod

  1. 1
    Fish with the guides aligned to reduce wear on your line. The guides are the metal rings that hold the line to the rod.
  2. 2
    Avoid banging your rod on the boat, rocks or other surfaces. Rods are relatively fragile, and even small nicks or scratches can result in breakage.[1]
    Advertisement
  3. 3
    Clean your rod with a cloth, lukewarm water and vinegar or mild detergent every time you finish fishing. If your rod is soiled, remove the dirt with a soft-bristle brush or a toothbrush. Allow the rod to dry completely before putting it away.[2]
    • Take extra care to clean your angling rod if you have been fishing in saltwater, as there is a higher chance of corrosion.
  4. 4
    Rub the rod's joints with candle wax or paraffin to prevent friction. The joints, also known as ferrules, are the places where the separate sections of the rod join.[3]
  5. 5
    Wear gloves while you fish if your rod has a cork handle. Oils in your skin may cause the cork to wear out sooner.
    • If your cork handle is already worn, wet the rod grip and sand the cork grip with fine, waterproof sandpaper. Then, put some soap on the sandpaper and gently rub the cork. Rinse off the soap and let the grip dry. Be careful not to rub the rod itself with the sandpaper.
  6. 6
    Fill small holes with a mixture of cork filings and wood glue or wood putty.
  7. Advertisement
Method 2
Method 2 of 2:

Storing the Rod

  1. 1
    Store your rod on a rod rack that can be mounted vertically or horizontally. Storing a rod improperly may result in damage or curvature. If you do not have a rack, store the rod on a hanger or nail in a closet.[4]
  2. 2
    Loosen the drag before storing your rod and reel so the line does not break or pull on the rod.[5]
  3. 3
    Remove the fishing line from your rod and reel before storage if you have been fishing in saltwater.
  4. Advertisement

Community Q&A

  • Question
    How do I tie a fishing rod for saltwater?
    Community Answer
    Community Answer
    A palomar knot is the simplest knot that I know that is strong enough to handle saltwater fish. To tie a palomar, you take the line and make about a 10 cm. loop. Thread it through the eye of the hook or lure and then make an overhand knot. Finally, pass the loop over the hook or lure.
  • Question
    How do I pack up my rod when I'm done fishing? What do I do with my hook?
    WikiaWang
    WikiaWang
    Top Answerer
    When you're done fishing, hang your hook to one of the circular latches on your fishing rod, or the holes that keep your string in place. That way, the hook won't swing around like crazy and will help maintain it. When done fishing, lean your rod against a wall; if you're moving or traveling with the rod, put bubble wrap around it and put it in a case if you can.
Advertisement

Warnings

  • Take care not to jerk the rod at a sharp angle even if you have a big fish. A rod can break even if it is bent just 90 degrees.
    ⧼thumbs_response⧽


Advertisement

About This Article

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time. This article has been viewed 70,964 times.
126 votes - 80%
Co-authors: 7
Updated: August 6, 2020
Views: 70,964
Categories: Fishing Rods
Advertisement