How to Make Dandelion Wine

Co-authored by Jessica Gibson

Last Updated: March 10, 2021 References Approved

When life gives you a yard full of dandelions, make dandelion wine! Instead of spraying or destroying dandelions, cut a bucket full and make a batch of wine using sugar, yeast, and citrus. Once you ferment and strain your concoction, you can enjoy dandelion wine that has a mild, floral taste. This sweet wine has a moderate alcohol content, so it's great as a dessert wine.

Ingredients

16 cups (3.8 L) of boiling water
16 cups (2 kg) of dandelion flowers, stems removed and rinsed
3 lemons, sliced
3 oranges, sliced
1 cup of (145 g) of raisins
5 1/2 cups (1 kg) of white granulated sugar
1 tablespoon (12 g) of wine yeast or active dry yeast

Makes 4 25 fl oz (740 ml) bottles

Part 1

Part 1 of 2:

Mixing the Dandelion Wine

1
Sterilize your winemaking equipment with hot water. You can buy winemaking supplies at a local homebrewing and fermenting store or find equipment online. Don't use soap to clean your materials because soap leaves a residue. Instead, use a scrub brush and hot water to sterilize your pot, spoon, bottles, and strainer. To make dandelion wine, you'll need:^{[1]
X
Trustworthy Source
University of Georgia Cooperative Extension
Division of the University of Georgia focused on research and community education
Go to source}
- A pot that holds at least 5 US quarts (4.7 L)
- Fine-mesh strainer
- Cheesecloth
- Fermenting container
- A thin plastic tube for siphoning
- 5 wine bottles
2
Cut 16 cups (2 kg) of dandelion flowers. Take a big bucket into a field of dandelions that haven't been sprayed with pesticides. Pluck the dandelion heads and toss them into the bucket. Try not to pick any leaves or stems, since you don't want anything green, which makes the wine bitter. When you get home, measure the flowers to see if you have 16 cups (2 kg).^{[2]
X
Research source}
- Pick your dandelions on a sunny day since they'll be wide open and there won't be bugs hiding in the petals.
- Some people don't mind leaving the green base attached to the dandelion heads, but it can make your wine taste a little bitter. For the best-tasting wine, cut the petals from the green base of the stem.
- Enlist help for this! It can take a while to pick 16 cups (2 kg) of dandelions, so ask friends or your kids to pick with you.
Advertisement
3
Pour boiling water over the petals and soak them for 3 days. Transfer the petals into a pot that holds at least 5 US quarts (4.7 L) and carefully pour in 16 cups (3.8 L) of boiling water. Then, cover the pot and put it in a dark room at room temperature. Leave the petals to soak for 3 days so they infuse the water.^{[3]
X
Research source}
4
Strain the liquid into another large pot. Get out another pot that holds at least 5 US quarts (4.7 L) and set it on the stove. Place a colander or fine-mesh strainer over it and lay a few pieces of cheesecloth in it. Take your infused dandelion water and slowly pour it through the strainer so the cheesecloth catches all of the petals. Then, throw away the petals.^{[4]
X
Research source}
- You can push against the petals with the back of a spoon or gather the cheesecloth and squeeze it to get all of the water into the pot.
5
Add sliced citrus, raisins, and sugar to the pot. Cut 3 lemons and 3 oranges into slices and add them to the pot. Stir in 1 cup of (145 g) of raisins and 5 1/2 cups (1 kg) of white granulated sugar.^{[5]
X
Research source}
- The citrus lightly flavors the wine and the raisins can give the wine some body.
6
Boil the liquid for 30 minutes. Turn the burner to high and stir the mixture occasionally. Boil it for 30 minutes so all of the sugar completely dissolves and the raisins plump up.^{[6]
X
Research source}
- Use a long-handled spoon so you don't burn yourself if the hot liquid splatters.

Part 2

Part 2 of 2:

Fermenting the Wine

1
Pour the liquid a fermenting container and cool it to room temperature. Get out a fermenting container that holds at least 5 US quarts (4.7 L) and pour the strained dandelion water into it. Set the liquid aside to cool for at least a few hours or until it's room temperature.^{[7]
X
Research source}
- It's really important to cool the liquid before you add the yeast or the heat will kill the yeast.
- You can use a sterilized bucket, jar, or container with a lid to ferment the wine.
2
Sprinkle 1 tablespoon (12 g) of active dry yeast onto the liquid. Before you add the yeast, read the label and check the expiration date. If the yeast hasn't expired, sprinkle 1 tablespoon (12 g) of it over the liquid in your fermenting container. There's no need to stir the yeast.^{[8]
X
Research source}
- Wine yeast is best for this recipe, but if you can't find it, you can substitute the same amount of active dry yeast. However, your wine might be cloudy and the taste may be a little off if you use active dry yeast.
3
Cover the container with cloth and pin it in place. Spread a layer of cheesecloth over your fermenting container and secure the edges.^{[9]
X
Research source} Use clothespins to pin the cloth to the edges of a fermenting bucket or use a rubber band to hold the cloth in place on a fermenting jar.
4
Ferment the wine for 3 weeks at room temperature and stir it once a day. Put the fermenting container back in a dark place at room temperature and leave it for 3 weeks. Stir it once a day until the surface of the liquid stops forming bubbles.
- The yeast causes the liquid to foam as it becomes active. When it stops foaming, this is a sign that the wine isn't fermenting anymore.^{[10]
  X
  Research source}
5
Strain the wine into a clean container. Set a fine-mesh strainer over a large container and pour the wine through it. This catches stray dandelion petals, the citrus slices, and the raisins.^{[11]
X
Research source}
- Stop pouring when there's mainly cloudy yeast sediment in the bottom of your fermenting container.
6
Leave the wine for 2 to 3 days before you bottle it. Give the wine a chance to settle again before you bottle it. Wait 2 or 3 days, then set 5 sterilized wine bottles on your counter. Fill each bottle with dandelion wine and leave space at the top so you can put a cork in.^{[12]
X
Research source}
- If you have a siphon and clear plastic tubing, use these to siphon the wine from the container into the bottles.
7
Age the wine for 2 to 3 months before you serve it. If you try to drink the dandelion wine immediately, it will have a harsh flavor that's not very pleasant. Put your filled wine bottles in a cool, dark space and leave the wine for at least a few months before you enjoy it. You'll be rewarded with mellow, sweet dandelion wine!^{[13]
X
Research source}
- Remember that dandelion wine has about the same alcohol content as standard wine made from grapes. Only serve the wine to guests who are of legal drinking age, and drink responsibly.
- If you taste the wine and find that it's still too harsh, just stop it back up and age it for a few more weeks.

Community Q&A

Question

How much would I increase the ingredients to produce 5 gallons?

Community Answer

A basic rule of thumb is to multiply (or divide) ingredient quantities to match what you want to brew, with the exception of the yeast. A package of yeast can do upwards of 7 gallons.
Question

Can I freeze picked dandelions until I have enough to make wine?

Community Answer

Certainly! It can be hard to pick all of the dandelions you need all at once. Pick as many as you want and trim off the green parts before you stick the petals into a freezer-safe bag or container.

Warnings

Dandelion wine does contain alcohol. Enjoy it responsibly if you're above the legal drinking age. Never drink and drive.

⧼thumbs_response⧽
Helpful 3 Not Helpful 0