How to Make Stained Glass

|

Design & Creation

|

Troubleshooting

|

Video

|

Q&A

|

Tips

|

Warnings

|

Things You'll Need

ARTICLE

VIDEO

The term stained glass generally refers to the process of combining various shapes of already colored glass. The color of stained glass comes from the addition of metallic salts during its manufacturing. Stained glass is prominently displayed in church windows, as well as in certain styles of lampshades and mirrors. Creating stained glass objects requires some skill and precision, but can be a fun project.

Part 1

Part 1 of 3:

Materials & Prep

1
Pick an easy beginning project. If you're just starting out making stained glass you don't want to reach too far too quickly. Start with a smaller, simpler pattern that doesn't require too many parts.
- Beginners might consider a simple panel to affix to a window, for example. You want a project that doesn't have too many sharp edges, that doesn't have so many parts to keep track of. A simple panel for your window can be a great start!
2
Pick a pattern. You want to find a pattern that you like and that your skill level will allow you to do. Consider things like how many glass pieces the pattern will need and how much cutting and soldering you're going to have to do. If you're just starting out, again, it's best to pick a simpler pattern.
- There are lots of free patterns out there: you can get them on the internet, in books from the library, and so on. The beauty of a pattern that's already available is that you don't have to figure out how it's going to work; that work has already been done for you.
- Create your own pattern. You could create your pattern based on something that you saw around you, or a pattern that you saw somewhere (like in a cathedral's stained glass window) that you're trying to replicate on your own.
- Look for inspiration in books and in nature. Beginners should choose a pattern that is broad and simple, such as a flower (although, be mindful of the curves and the sharp edges).
Advertisement
3
Pick a type of glass. Sheet glass is what you'll be using for this project. It falls into two basic categories: Cathedral and Opalescent. You will also need to consider things like price, texture, color, and degree of transparency.
- Stained glass comes in large sheets. The smallest sheet is approximately 1 foot (0.3 m) by 1 foot (30.48 cm by 30.48 cm) with the largest being four times that size. Buy enough glass for the size of your project, but keep in mind that about a quarter of what you buy will not be utilized after trimming.
- Cathedral glass tends to be a clear or transparent color. It's composed of clear glass with colorants added. This glass requires less pressure to cut through
- Opalescent glass incorporates white, or opal glass, into the color mix. An opalescent blue is blue glass that is not entirely transparent, for example. Opalescent glass tends to require more pressure to cut through, because the opal of the glass creates a higher density than Cathedral glass.
- You can combine these two types together in your project if you want an interesting mix of clear and opaque. Keep in mind that they need slightly differently handling (as evidenced by the pressure needed to cut through them). There is also streaky glass which tends to be Cathedral glass with streaks of opal mixed in.
4
Purchase your glass. The best place to get stained glass for your project is at a stained glass supply shop. You can find both equipment for making stained glass as well as the stained glass itself. You can also get stained glass at some of the larger hobby and craft stores, but you'll get a better selection at a shop specific to stained glass.
- Most of the glass you buy comes in sheets about one square foot (30 cm) and one eighth of an inch thick. The sheet can be anywhere from $6 to $20 depending on the color and the detail in the glass, the strength and brightness of the colors.
- It can also depend on where the glass comes from. Glass that comes from Europe is simply going to cost more. This is often called Antique glass even if it was made in modern times.
5
Gather your equipment. You'll need to gather some specific equipment for making your stained glass project. You can find these items at most hobby or craft stores, but especially at stained glass supply shops.^{[1]
X
Research source}
- Glass cutter: there are lots of different glass cutters available. The hand cutter has the best flexibility and accuracy in template cutting. The Pencil style cutter is great for beginners, as well as those doing trace cutting, because it has consistent pressure and control. The Pistol grip is great for cutting thick glass and is also a good choice for beginners whose hand strength isn't enough.
- Pliers: ordinary house pliers shouldn't be used for this. You'll need Grozer pliers for breaking glass and nipping off edges as well as Running pliers for snapping long cuts in the glass.
- Copper foil comes in a variety of widths depending on the width of your glass. This is used to hold the glass pieces together through the adhesive on the one side. If you're using Cathedral glass (clear glass) the backing will be visible so make sure you're using the right color for your piece.
- Soldering iron and solder: Solder is a mixture of tin and lead. The higher the tin content, the lower the melting point, which means it will flow more quickly and with a more silvery finish. As for the soldering iron you'll need one that is designed for stained glass projects with a minimum of 75 watts. The irons come with different sized tips, depending on your project.
- Grinder: if you don't have access to a grinder you can use a Carborundum stone to grind down the edges of your glass after cutting. If you can get a grinder the Electric Glass Grinder is great for dealing with sharp edges quickly.

Part 2

Part 2 of 3:

Design & Creation

1
Make your template. Draw, copy or print out your pattern on a piece of graph paper that's the actual size. Cut the pattern into its separate pieces and label them by color and grain direction. Place the pattern under the glass and trace the outline with a thin permanent marker.^{[2]
X
Research source}
- Leave a centimeter or less of room for the thickness of the copper foil between the pieces.
- Use either a specialty black pen or a permanent marker to mark the glass.
- If you have access to a lightbox this can be incredibly helpful for tracing the pattern onto the glass.
2
Score your glass. Hold the glass cutter between your thumb and your forefinger with the tip pressed between your forefinger and your middle finger. Press the cutter into the glass gently, using a cork-backed, steel ruler to cut straight. Begin at a point away from your body and begin scraping inward.
- Make sure that you're applying the right amount of pressure. You should hear a nice, clear "zzzzip" as you score. If you apply too little pressure, the break will not follow the score line. Too much pressure and you'll cause unnecessary wear and tear on your cutter as well as your wrist and elbow.
- Move your pattern around, rotating the glass as necessary to keep proper form. Make sure that the score line goes from edge to edge.
3
Cut your glass. There are a few slightly different methods to cutting your glass, depending on the size and the curve of the glass. The goal, of course, is to cut the glass along the scored lines so that it breaks apart easily and leaves you with the shapes that you need.
- For straight pieces, as soon as you see a line forming, place pliers in the crack and squeeze to separate the piece. You can also hold the glass on either side of the break and snap it apart with your hands.
- For curved sections, use the glass cutter to break through the scoring. Don't worry if the piece breaks off slightly jagged; you can remove edges later if you need to. As long as you keep your curves gentle. If you're dealing with deep curves, deal with it in a series of shallow curves so that it won't break on its own.
4
Grind the edges. Once you've cut all the different pieces, it's time to grind down the sharp edges and make sure that everything is smooth. Regular sandpaper will also remove sharp edges. Wear gloves to avoid accidentally cutting your hand if you slip. If you use a grinder with glass, you should wear a mask and googles to keep pieces of glass from being breathed or settling in your eyes.You will want to grind away gently and patiently so that you don't chip any of the pieces.
- Put the pieces along the pattern again so that you can grind down the glass into corrective lines. This will make sure that everything fits well together when you put the glass pieces together.
- It's also a good idea to build a frame around the pieces when you've finished grinding them and fitting them together. This way the pieces won't slip when you're foiling the glass.
5
Foil the glass. Cover the edges of the glass with 7/32 inch copper foil. Make sure the foil is centered, otherwise it can look a little funky at the end.. This can be done by hand or with a table foiler.
- Once you've decided on the thickness of your copper foil, you need to peel off the protective backing of the foil. Make sure that you center your glass correctly on the tape and press it securely along all the cut edges.
- Press the foil down hard with tongue depressor, or other firm instrument. This will ensure the foil adheres to the glass. You will want to make sure that the tape is very securely adhered as well as even. If a section gets bunched up, tear it off and start again.
6
Add flux to the copper foil. While flux helps the solder flow between the copper taped pieces, it isn't one hundred percent necessary. However, it can make things easier for you in the long run.
- Brush each copper-foiled surface with the flux before you solder each time.
- The gel form is the easiest and most forgiving to use, although you can also try out the liquid form.
7
Solder the glass in place. Soldering the glass takes a bit of time and patience. There are several different things you need to do to make sure you're soldering properly. You have to tack together your pieces, then you have to tin the seams, and finally you add the bead.
- To tack all the pieces together apply small dots of flux to desired areas, and melt a small blob of solder on top. Once you've got all the pieces tacked together you can tin the seams.
- To tin the seams you first add flux to all of the seams, then apply a thin, flat amount of solder to all of the seams. Make sure that you completely coat all of the copper foil.
- Apply a new layer of flux to the tinned seams, then melt a larger amount of solder onto the seams. Run your soldering iron back and forth over to create a melted seam of solder. Once a section is completely melted you'll lift the iron up from your piece to create a smooth bead.
8
Frame your creation. Framing isn't absolutely necessary but it can create a nice finish to your piece. You could use a zinc frame or a lead channel, which requires more soldering, exactly the same as the steps outlined above.

Part 3

Part 3 of 3:

Troubleshooting

1
Deal with gaps between your pieces. Especially when you're a beginner you can screw up with cutting the glass or grinding it down. This will leave you with gaps between your pieces.
- Compensate for these inaccuracies by filling the gaps between your glass pieces with copper solder. Solder as you would normally.
2
Avoid problems with scoring your glass. There are lots of things that can go wrong with scoring your glass and most of these have to do with how you're standing, how much pressure you're using, and what sort of a cutter you're using.
- Make sure that you're standing for long scores. This will give you better reach by utilizing your shoulder and upper body in the scoring motion. For small scores, make sure that you stay seated so you can concentrate on following the marker score line.
- Use the right glass cutter. You do not want to use a five dollar cheap glass cutter as it doesn't cut clear, thin glass very well and it certainly won't cut much harder art glass. Get one that it has a carbide head, because the oil lubrication is very useful.
- Make sure that you apply even pressure throughout your scoring. Remember you should hear a zipping sound as you score. Also good to remember: Opalescent glass requires more pressure, Cathedral glass requires less pressure.
3
Deal with problems while soldering. Like scoring, soldering your glass can yield some problems if you're not doing it correctly. Make sure that the heat is correct, that the tip of the soldering iron is the right size for the project, and that the flux you're using is good for higher temperatures.^{[3]
X
Research source}
- Using the wrong kind of flux can lead to charring, called 'black tip syndrome.' When this happens it means that the tip of the soldering iron turns black and re-tinning becomes impossible.
- Use the right size soldering iron tip. Make sure that you know what the width of the glass you're working with is and have the tip and the copper spaced accordingly.

Community Q&A

Question

Do I foil all edges, even the edges the frame will cover?

Community Answer

Yes. The copper foil is what the solder actually binds to. Not going the whole way around could allow the foil to eventually start to separate from the glass. You need to actually solder the glass, in most cases, to the frame to prevent movement of the glass inside the frame. The back of the foil also is colored. If you do not use the foil the entire way around the piece, you will see a color difference along the edges of the individual pieces when looking through the glass.
Question

Do I leave the pins in the glass as I work?

Community Answer

Tack solder the pieces together (all connecting joints). Then remove the pins and you can move the piece around as you work. Allow the item to cool before touching - exercise caution as it is easy to get "caught up in the fun" and grab the piece prematurely. Enjoy and be safe!
Question

When you draw your own design what type of paint do you buy?

Community Answer

Drawing your own design just means that you come up with your own pattern to cut out, rather than using a pre-made pattern. You would just need a richly-colored black marker or pencil to make the outline.

Warnings

Do not score too deeply. This will cause the glass to break awkwardly.

⧼thumbs_response⧽
Helpful 36 Not Helpful 9
Always protect your eyes and fingers when cutting and soldering stained glass. Wear eye protection and gloves.

⧼thumbs_response⧽
Helpful 30 Not Helpful 10
If you're planning on using cutting oil, make sure that you use it sparingly if you're going the copper foil route. Too much oil will prevent the glue from sticking on the glass.

⧼thumbs_response⧽
Helpful 28 Not Helpful 11