Memorization tips and tricks to make calculating sine, cosine, and tangent a breeze

Trigonometry (or trig) is one of the most fun branches of math, but it’s tough remembering all the key numbers and formulas. If you’re struggling with trig, you’ve come to the right place. We’re here to help you remember all kinds of trigonometric equations with easy-to-follow methods. We’ll walk you through multiple memorization tactics, from mnemonic devices to the trigonometric table: a helpful chart that lists key trig values like sine, cosine, and tangent. Keep reading and you’ll remember trig equations like the back of your hand!

Things You Should Know

  • Draw a trigonometric table with 6 rows and columns. Each row will determine the sine, cosine, tangent, secant, cosecant, and tangent of 0, 30, 45, 60 and 90°.
  • Number your table’s columns 0-4 starting at 0°. Then, input each column’s number into √x/2 to calculate your sine values. For example, column 1 (0°) = √0/2 = 0.
  • Reverse the sine values in your table to calculate your cosine values. For example, since the 0° column of the sine row = 0, the final 90° column of the cosine row = 0.
  • To calculate tangent, divide your sine values by your cosine values.
Section 1 of 4:

Trigonometric Values

Angles (in Degrees) 30° 45° 60° 90°
sin𝛳 0 1/2 √2/2 √3/2 1
cos𝛳 1 √3/2 √2/2 1/2 0
tan𝛳 0 √3/3 1 √3 Not defined
cosec𝛳 Not defined 2 √2 2√3/3 1
sec𝛳 1 2√3/3 √2 2 Not defined
cotan𝛳 Not defined √3 1 √3/3 0
Section 2 of 4:

Trigonometric Values (in Decimals)

Angles (in Degrees) 30° 45° 60° 90°
sin𝛳 0 0.5 0.707 0.866 1
cos𝛳 1 0.866 0.707 0.5 0
tan𝛳 0 0.577 1 1.732 Not defined
cosec𝛳 Not defined 2 1.414 1.155 1
sec𝛳 1 1.155 1.414 2 Not defined
cotan𝛳 Not defined 1.732 1 0.577 0
Section 3 of 4:

Creating a Trig Table

  1. 1
    Draw a blank trigonometry table. Creating a trigonometric table can help you remember key trig formulas. Design your table to have 6 rows and 6 columns. In the 1st column, write down the key trigonometric ratios (sine, cosine, tangent, cosecant, secant, and cotangent). In the 1st row, write down the angles you’ll most commonly be using in trigonometry (0°, 30°, 45°, 60°, 90°).[1]
  2. 2
    Number your table’s columns in ascending order, starting at 0. Once you’ve created your 6 rows and columns, assign each column a number from 0-4. The number for the 0° column should be 0, the number for 30° should be 1, 45° should be 2, 60° should be 3, and 90° should be 4.[2]
    Advertisement
  3. 3
    Use √x/2 to find the values for your table’s sine row. Plug in each column’s number into the formula √x/2. Use this formula to calculate the sine values for 0°, 30°, 45°, 60°, and 90° and write those values in your table.
    • For example, for the first entry in the sine column (sin 0°), set x to equal 0 and plug it into the expression √x/2. This will give you √0/2, which can be simplified to 0/2 and then finally to 0.
    • Plugging the angles into the expression √x/2 in this way, the remaining entries in the sine row are √1/2 (which can be simplified to ½, since the square root of 1 is 1), √2/2 (which can be simplified to 1/√2, since √2/2 is also equal to (1 x √2)/(√2 x √2) and in this fraction, the “√2” in the numerator and a “√2” in the denominator cancel each other out, leaving 1/√2), √3/2, and √4/2 (which can be simplified to 1, since the square root of 4 is 2 and 2/2 = 1).[3]
    • Once the sine row is filled, it’ll be a lot easier to fill in the remaining rows.
  4. 4
    Place the sine row entries in the cosine row in reverse order. Mathematically speaking, sin x° = cos (90-x)° for any x value.[4] Thus, to fill in the cosine row, simply take the entries in the sine row and place them in reverse order in the cosine row. Fill in the cosine row so that the value for the sine of 90° is also used as the value for the cosine of 0°, the value for the sine of 60° is used as the value for the cosine of 30°, and so on.
    • For example, since 1 is the value placed in the final entry in the sine column (sine of 90°), this value will be placed in the 1st entry for the cosine column (cosine of 0°).
    • Once filled, the values in the cosine row should be 1, √3/2, 1/√2, ½, and 0.
  5. 5
    Divide your sine values by the cosine values to fill the tangent row. Simply speaking, tangent = sine/cosine. Therefore, for every angle, take its sine value and divide it by its cosine value to calculate the corresponding tangent value.[5]
    • To take 30° as an example: tan 30° = sin 30° / cos 30° = (√1/2) / (√3/2) = 1/√3.
    • The entries of your tangent row should be 0, 1/√3, 1, √3, and undefined for 90°. The tangent of 90° is undefined because sin 90° / cos 90° = 1/0 and division by 0 is always undefined.
  6. 6
    Reverse the entries in the sine row to find the cosecant of an angle. Starting from the bottom row (or denominator) of the sine row, take the sine values you’ve already calculated and place them in reverse order (above the numerator) in the cosecant row. This works because the cosecant of an angle is equal to the inverse of the sine of that angle.[6]
    • For instance, use the sine of 90° to fill in the entry for the cosecant of 0°, the sine of 60° for the cosecant of 30°, and so on.
  7. 7
    Reverse the entries of the cosine row to fill out the secant row. Starting from the cosine of 90°, enter the values from the cosine row in the secant row, such that value for the cosine of 90° is used as the value for the secant of 0°, the value for the cosine of 60° is used as the value for the secant of 30°, and so on.[7]
    • This is mathematically valid because the inverse of the cosine of an angle is equal to that angle’s secant.
  8. 8
    Fill the cotangent row by reversing the values from the tangent row. Take the value for the tangent of 90° and place it in the entry space for the cotangent of 0° in your cotangent row. Do the same for the tangent of 60° and the cotangent of 30°, the tangent of 45° and the cotangent of 45°, and so on, until you’ve filled in the cotangent row by inverting the order of entries in the tangent row.[8]
    • This works because the cotangent of an angle is equal to the inversion of the tangent of an angle.
    • You can also find the cotangent of an angle by dividing its cosine by its sine.
  9. Advertisement
Section 4 of 4:

Using a Mnemonic Device

  1. 1
    Draw a right triangle around the angle you’re working with. For an easy way to memorize the formulas of trigonometric ratios, start by extending 2 straight lines out from the sides of the angle. Then, draw a third line perpendicular to 1 of these 2 lines to create a right angle. Continue drawing this perpendicular line towards the other of the 2 original lines until they intersect, thereby creating a right triangle around the angle you’re working with.[9]
    • If you’re calculating sine, cosine, or tangent in the context of a math class, it’s likely you’ll already be working with a right triangle.
    • Right triangles are a key part of remembering right-angled trigonometry and trig in general.
  2. 2
    Calculate sine, cosine, or tangent by using the sides of the triangle. The sides of the triangle can be identified in relation to the angle as the “opposite” (the side opposite of the angle), the “adjacent” (the side next to the angle other than the hypotenuse), and the “hypotenuse” (the side opposite the right angle of the triangle). Sine, cosine, and tangent can all be expressed as different ratios of these sides.[10]
    • The sine of an angle is equal to the opposite side divided by the hypotenuse.
    • The cosine of an angle is equal to the adjacent side divided by the hypotenuse.
    • The tangent of an angle is equal to the opposite side divided by the adjacent side.
    • For example, to determine the sine of a 35° angle, divide the length of the opposite side of the triangle by the hypotenuse. If the opposite side’s length was 2.8 and the hypotenuse was 4.9, then the sine of the angle would be 2.8/4.9, which is equal to 0.57.
  3. 3
    Use a mnemonic device to remember ratios for sin, cos, and tan. The most commonly used acronym to remember trigonometric ratios is SOHCAHTOA, which stands for “Sine Opposite Hypotenuse, Cosine Adjacent Hypotenuse, Tangent Opposite Adjacent.” To better remember this acronym, spell out a mnemonic phrase with these letters like “She Offered Her Child A Heaping Teaspoon Of Applesauce.”[11]
  4. 4
    Inverse the sine, cosine, or tangent to find their reciprocal ratios. To calculate cosecant, secant, and cotangent, simply invert the ratios of each triangle side using SOHCAHTOA. Because cosecant is the inverse of sine, it is equal to the hypotenuse divided by the opposite side. The secant of an angle is equal to the hypotenuse divided by the adjacent side, and the cotangent of an angle is equal to the adjacent side divided by the opposite side.[12]
    • For example, if you wanted to find the cosecant of a 35°, with an opposite side length of 2.8 and a hypotenuse of 4.9, you would divide 4.9 by 2.8 to get a cosecant of 1.75.
  5. Advertisement

Community Q&A

  • Question
    Where do I find secant and cosecant?
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    Secant and cosecant are the reciprocal values of cosine and sine. Inverse the numbers of whatever your cosine value is to find the secant. Inverse the numbers for your sine value to find the cosecant.
  • Question
    How do I remember the trigonometric identites?
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    The best way to memorize trig identities is with a mnemonic device like SOHCAHTOA for calculating angles.
  • Question
    Why is the 45 degree angle for cosecant and secant root 2?
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    Cosecant and secant are the inverse of sine and cosine's numerator and denominator. 2 over the square root of 2 would be improper. Therefore, multiplying each by √2 would create 2√2/2. The 2s would cancel out leaving √2.
Advertisement

Warnings

  • Because you can’t divide by 0, you can’t reach a definable answer for tan 90° or cot 0°. Write "not defined" or "n/a" (not applicable) instead.
    ⧼thumbs_response⧽
Advertisement

About This Article

Finn Kobler
Co-authored by:
wikiHow Staff Writer
This article was co-authored by wikiHow staff writer, Finn Kobler. Finn Kobler graduated from USC in 2022 with a BFA in Writing for Screen/Television. He is a two-time California State Champion and record holder in Original Prose/Poetry, a 2018 finalist for the Los Angeles Youth Poet Laureate, and he's written micro-budget films that have been screened in over 150 theaters nationwide. Growing up, Finn spent every summer helping his family's nonprofit arts program, Showdown Stage Company, empower people through accessible media. He hopes to continue that mission with his writing at wikiHow. This article has been viewed 764,472 times.
How helpful is this?
Co-authors: 28
Updated: March 17, 2023
Views: 764,472
Categories: Trigonometry
Article SummaryX

To remember the trigonometric table, use the acronym "SOHCAHTOA," which stands for "Sine opposite hypotenuse, cosine adjacent hypotenuse, tangent opposite adjacent. For example, if you wanted to calculate the sine of an angle or triangle, you'd know that sine is "sine opposite hypotenuse" based on "SOHCAHTOA." Therefore, you would just divide the opposite side of the triangle by the hypotenuse to get the sine. To learn how to remember the trigonometric table by finding the ratios of common angles, keep reading!

Did this summary help you?
Advertisement