A leak in your radiator can result in losing enough coolant to cause your vehicle to overheat, but there are other indications that you may be losing coolant. If you keep your eyes peeled for signs that your radiator is leaking, you may be able to repair it before it becomes an issue. There are a number of ways to seal small cracks and holes in radiators that you can utilize to get back on the road with minimal hassle. There are even a few tricks that can work in an emergency to seal small leaks long enough to get you home or to a mechanic.

Part 1
Part 1 of 3:

Identifying a Leak in Your Radiator

  1. 1
    Look for a rise in the temperature gauge. Your radiator dissipates heat to help maintain the optimal operating temperature for your vehicle’s engine. A leak in your radiator will result in lost coolant, which will compromise the system’s ability to reduce that temperature. When your coolant system begins to fail, the temperature gauge on your dash board will climb. If your vehicle has been running consistently warmer or if you have recently begun having issues with overheating, you may have a leak in your radiator.[1]
    • Remember that overheating can cause serious damage to the engine in your vehicle. Stop driving immediately if your vehicle begins to overheat.
    • If your vehicle has been running hotter than usual, you may have a slow leak, as there is still enough coolant in the system to keep the engine cool enough to operate.
  2. 2
    Take note of puddles under your vehicle. An easy way to identify a coolant leak is to notice when puddles of coolant form under your vehicle. Of course, there are a number of fluids in a vehicle’s engine that may leak, so you will need to look closely and possibly even touch the fluid in order to properly identify it. Remember that driving with your air conditioning on will result in moisture dripping from your A/C compressor and that vehicles are just as prone to oil leaks as they may be to coolant ones. If you notice a puddle under your vehicle, or where your vehicle used to be parked, look closely at it.[2]
    • Coolant has a green or orange hue to it and should look quite different from motor oil or water.
    • New motor oil may be yellowish, but if it’s been in your engine for a while it will likely be dark brown or even black.
    • Dripped condensation from your air conditioning will just be water.
    Advertisement
  3. 3
    Check your coolant reservoir. If you suspect that you may have a leak in your radiator that you haven’t been able to identify, make note of the coolant level in the coolant reservoir under the hood. Most coolant reservoirs will have low and high fill marks clearly indicated. Draw a line on the reservoir with a paint pen or take a picture of it with your phone to remember the level the fluid is at upon your first inspection. Open the hood and check again after a few hours of driving to see if the level has gone down. If you did the initial check with the engine cold, wait for it to cool again before rechecking.[3]
    • Coolant remains in the sealed system and the level should not change.
    • If the coolant level is lower upon your second inspection, it means that there is a leak somewhere.
  4. 4
    Visually inspect the engine bay. If you notice more rust and discoloration on the parts surrounding your radiator or on the radiator itself, that may be an indication that there is a coolant leak in the radiator in that vicinity. As the leak permits the coolant and water to escape the radiator while you’re driving, it encourages rust to develop on the parts it comes into contact with. While all engine components can be subject to rusting, if you notice an area with an inordinate amount of it near your radiator, there may be a leak there.[4]
    • Look for signs of coolant around rust spots that you identify.
    • You may be able to find the leak by following any coolant in these rusty areas to their highest point.
  5. Advertisement
Part 2
Part 2 of 3:

Locating the Leak

  1. 1
    Allow the engine to cool.[5] Your radiator has the important task of helping to maintain the operating temperature of the engine. As a result, the radiator and coinciding lines can become extremely hot. While hot, the coolant system is pressurized, so removing the radiator cap can expel heated coolant and steam that can be dangerous. Pull the car into the space or garage bay that you will be working on it from and allow it to cool for a few hours before beginning this project.[6]
    • Open the hood after you park the vehicle to allow the heat to dissipate unimpeded.
    • Be prepared to wait for a few hours for your engine to cool enough to work on.
  2. 2
    Put on the appropriate safety gear. Because coolant systems are pressurized, it’s important to wear safety glasses when working on your radiator. Although the engine should be cool to the touch before you proceed, coolant systems can be under a great deal of pressure and may expel gas when you open the cap. You also may need to climb under the car at some point during this project and safety glasses will protect your eyes from falling debris that is caught in the vehicle’s undercarriage.[7]
    • Always wear safety glasses when working under the vehicle.
    • You may also choose to wear gloves to protect your hands from pinches and any remaining heat.
  3. 3
    Wash the radiator with a hose. It will be much easier to locate the leak in your radiator after it’s clean of old grime and coolant. Use a hose to spray the radiator and surrounding components so you can know for sure that any new coolant you see in the engine bay after you start the car has leaked since you washed it. As you wash the radiator, look for any signs of cracks in the radiator itself or on either of its end tanks.[8]
    • It is unnecessary to use soap when washing your radiator.
    • Use paper towels to wipe away any areas of excessive grime.
  4. 4
    Start the car and look for new signs of leaks. One of the two methods you can use to identify a leak in your radiator is to start the engine once it’s clean. With the engine running, look closely at your radiator and at the surrounding engine for signs of a leak. You may see steam or fluid spraying out of a leak, coolant or water dripping down the radiator or piping, or hear the hissing of a leak that you aren’t able to see from your vantage point. This method can help to point you in the right direction, but may require you to shut the car off again to gain visibility on harder to spot areas of the radiator.[9]
    • Look for fluid or gas spraying from cracks in the radiator.
    • Look for drops of coolant running downward from a leak above them.
    • Listen for hissing coming from the area around the radiator for leaks you can’t see.
  5. 5
    Use a pressure tester to locate leaks. You can purchase a coolant system pressure tester at your local auto parts store. To use it, make sure the engine is cool and remove either the radiator or pressure cap from your coolant system. Install the tester in place of the cap using the included adaptor. Once the tester is secured and the system is once again sealed, use the tester to pump ten pounds of pressure into the coolant system. When the gauge indicates a loss of pressure, that means the pressure is currently leaking from the system. Follow the sound of the air leaking from the crack to locate it.[10]
    • Be careful not to add more than 10 to 15 pounds of pressure (psi) to your coolant system. More than that could result in damage and even create more leaks. Your cooling system operating pressure should be listed on the radiator cap and you shouldn't exceed this number by much when pressure testing.
    • Look for any leaks that may be present on coolant lines as well as the radiator as they may be susceptible to cracking over time.
  6. Advertisement
Part 3
Part 3 of 3:

Repairing a Coolant Leak

  1. 1
    Use a commercial leak sealant. There are a number of products on the market designed to make sealing a leak in your radiator simple and easy. Although there are multiple brands, the methodology of these leak sealant products is fairly universal. Start by ensuring the engine is off and cool. Remove the radiator cap and pour the contents of the leak sealant directly into the cooling system. Top it off with a coolant and water mixture if your vehicle’s engine is currently low. Replace the radiator cap and start the engine. The leak will seal as the sealant makes its way through your coolant system.[11]
    • This method is not as permanent as professional radiator repair or an epoxy, but will suffice to seal small leaks until more permanent repairs can be made.
    • Allow the engine to run for 5-10 minutes while the stop leak product makes its way through the coolant system.
    • After running it, allow the engine to sit overnight as the sealant sets.
  2. 2
    Use epoxy to seal visible cracks. When you identify a visible crack, clean the area around it thoroughly. Any remaining grease or dirt in the area may prevent the epoxy from establishing a seal. Use a brake cleaner and a rag to help you remove stuck on grime. Once the area is clean, allow it to dry completely before attempting to use the epoxy. Knead the epoxy in your hand until it becomes malleable enough for you to spread it out over the crack. Remember to be thorough and to keep the epoxy at least an eighth of an inch thick so it can withstand the pressures of the coolant system when the vehicle is running.[12]
    • You can purchase radiator epoxy at most auto parts stores.
    • Allow the epoxy to set overnight before starting the vehicle.
  3. 3
    Use an egg to seal a leaky radiator. Eggs are not a good long term solution, but they can actually seal pinhole leaks in your radiator until you are able to have it properly repaired. Start by separating the egg yolks from the whites. Discard the whites, then put the yolks from three or four eggs into your coolant system through the radiator cap. Start the engine just as you would with a leak sealant and allow the egg yolk to travel through the coolant system. The yolks will congeal and seal small leaks in your radiator and allow it to hold pressure long enough to get you home or to a garage to have repairs done.[13]
    • Using egg yolks could potentially lead to clogs in your coolant lines and is not recommended except in emergencies.
    • This method is less reliable than the commercial products you can use to permanently repair your radiator.
  4. 4
    Use pepper to seal small leaks. Pepper is another unlikely tool you can use to slow or stop a small leak in your radiator long enough to make it home or to a garage for repairs. Wait for the engine to cool completely, then open the radiator cap and pour in about a half a pepper shaker’s worth of common black pepper. The pepper, like sealant or egg yolks, will travel through the coolant system and get caught in the crack as the pressure tries to flush it out. This will create a temporary seal that you can use to hold coolant and pressure long enough to drive for a short time.[14]
    • Like egg yolks, this method is not recommended unless you are in an emergency and is less reliable than commercial products.
    • Pepper may be able to seal longer cracks than egg yolks, but is only recommended for small leaks.
  5. 5
    Check on your repair. Regardless of the method you used to seal the leak in your radiator, it’s important that you check on the repair once you’ve given it an opportunity to set. After driving the vehicle for a short time, keep an eye out for signs of leaking. If you believe you may still be leaking coolant, conduct the same tests to try to identify the source of the leak. There may be multiple leaks or your repair may not have sufficiently sealed the system. Identify any new leaks and repeat the process.
    • Egg yolks and pepper are not meant to be permanent solutions to a radiator leak. Consider using a leak sealant or epoxy to sure up the repair once you make it home.
    • Significant cracks may be beyond repair. In those cases, your radiator will likely need to be replaced.
    • Make sure to refill your coolant system with a 50/50 water and coolant mix any time it is low.
  6. Advertisement

Community Q&A

  • Question
    Can I drive for 5 hours if I have a leaking radiator?
    Community Answer
    Community Answer
    That depends on the speed of the leak. If you run out of coolant your engine will overheat and then a whole host of other problems will ensue. If you're going to drive with a leak, be sure to carry extra coolant and refill when necessary.
  • Question
    How can I repair a leaking radiator drain plug?
    Logic Johnson Lafontaine
    Logic Johnson Lafontaine
    Top Answerer
    When in doubt, use thread tape on the plug. Depending on the severity of the leak, you might just need to fill some tiny spaces between the plug and the hole.
  • Question
    How long does it take to repair a radiator leak?
    Community Answer
    Community Answer
    The amount of time it will take to make the repair depends on the method you choose to use and the severity of the leak. Some methods only take a few minutes.
Advertisement

About This Article

Duston Maynes
Co-authored by:
Automotive Repair Specialist
This article was co-authored by Duston Maynes. Duston Maynes is an Automotive Repair Specialist at RepairSmith. Duston specializes in leading a team that handles a variety of automotive repairs including replacing spark plugs, front and rear brake pads, fuel pumps, car batteries, alternators, timing belts, and starter motors. Duston holds an Associate’s degree in Automotive/Diesel Technology from The Universal Technical Institute of Arizona and is a Certified Diagnostic Technician and Automobile Mechanics Technician through BMW STEP. RepairSmith received The 2020 Big Innovation Award by Business Intelligence Group and The Startup of the Year by the American Business Awards. RepairSmith was also included in Built in LA’s 50 Startups to Watch and The Business Intelligence Group’s 52 Names Leading the Way in Customer Service. RepairSmith offers in-home services to provide car owners convenient and complete auto repair everywhere. This article has been viewed 1,190,997 times.
12 votes - 100%
Co-authors: 26
Updated: September 18, 2022
Views: 1,190,997
Categories: Engine Cooling Parts
Article SummaryX

Before you seal a leaking radiator, make sure to put on safety goggles to protect your eyes from gas and debris. Then, find the hole or crack where the coolant is leaking. If the hole is small, try pouring a few tablespoons of black pepper into your coolant system through the radiator cap, then turning on your car as you normally would to create a seal. For larger holes or cracks, pour a commercial leak sealant into the cooling system, top it off with coolant and water, then run the engine for 10 minutes before letting the vehicle sit overnight. For more advice, like how to seal visible cracks in your radiator using epoxy, read on!

Did this summary help you?
Advertisement