How to Take an Ankle Brachial Index

The Ankle Brachial Index (ABI) is the ratio of the blood pressure in the lower leg or ankle to the blood pressure in the arm. Knowing the ABI is important because it can be used as an indicator of Peripheral Arterial Disease (PAD). Peripheral arteries in the body can be affected in the same way as coronary arteries (arteries of the heart). They may get clogged with cholesterol or become stiff due to calcification. A significant difference between the blood pressure in the lower legs and arms may indicate a diseased peripheral artery. This disease can lead to more serious medical problems such as stroke and heart failure.

Part 1
Part 1 of 3:

Measuring Brachial Pressure

  1. Image titled Take an Ankle Brachial Index Step 1
    1
    Ask the patient to lie down in a face-up position. Lying face-up is known as being in the supine position. Make sure that your patient is lying on a flat surface so that his arms and legs are at heart level. Give the patient at least 10 minutes of rest before taking his blood pressure. Resting will help his blood pressure to normalize, particularly is he is anxious, while also allowing the heart and brachial pulse to level out.[1]
    • Both of your patient’s arms should be exposed. Any sleeves should be rolled up loosely and out of the way.
  2. Image titled Take an Ankle Brachial Index Step 2
    2
    Locate the brachial artery. Use your index and middle finger to locate the pulse site. Do not use your thumb because it has its own pulse that could make finding your patient’s pulse more difficult. The brachial pulse is usually felt just above the antecubital fossa--the middle part of the elbow bend.[2]
    Advertisement
  3. Image titled Take an Ankle Brachial Index Step 3
    3
    Wrap the blood pressure cuff around the patient’s left arm. Make sure that the cuff is placed about two inches above the brachial pulse site. To avoid inaccurate readings, make sure that the the cuff is loose enough that it can rotate around the arm slightly, but not so loose that it could slip down the arm.
    • If possible, use a blood pressure cuff that has a width that is approximately two-thirds of the length of the patient’s arm.
  4. Image titled Take an Ankle Brachial Index Step 4
    4
    Inflate the cuff to find the systolic blood pressure of the arm. To take the blood pressure reading, place the diaphragm (circular piece) of the stethoscope on the brachial pulse. Close the valve of the hand-pump and use it to inflate the cuff to about 20 mmHg above regular blood pressure or until the pulsating sound or your patient’s pulse is no longer audible.[3]
    • Systolic pressure describes the maximum arterial pressure created by the contraction of the heart’s left ventricle.
    • Diastolic pressure describes the minimum amount of pressure created when the ventricles fill with blood during the beginning of the cardiac cycle.[4]
  5. Image titled Take an Ankle Brachial Index Step 5
    5
    Deflate the cuff. Release the pressure slowly at a rate of 2 to 3 mmHg by opening the valve while closely monitoring the manometer (the pressure gauge[5] ). Take note when the pulsating sound returns, and again when it disappears--the systolic blood pressure is the point where the pulsating sound returns and the diastolic blood pressure is when the pulsating sound disappears. The systolic blood pressure is the value you will use later to calculate the ABI.[6]
    6. Advertisement
Part 2
Part 2 of 3:

Measuring the Ankle Pressures

  1. Image titled Take an Ankle Brachial Index Step 6
    1
    Ask your patient to remain lying face-up. The goal is to keep his arms and legs at heart-level so as to get the most accurate blood pressure reading. Remove the blood pressure cuff from your patient’s arm.
  2. Image titled Take an Ankle Brachial Index Step 7
    2
    Wrap the blood pressure cuff around the patient’s left ankle. Position the cuff two inches above the malleolus (the bony knob) of the ankle. Make sure that the cuff is not wrapped too tightly. Check its tightness by inserting two fingers. If you can’t insert two fingers, then it is too tight.
    • Make sure that you have the right sized cuff for your patient. The width of the cuff should be slightly wider than the diameter of the lower leg.
  3. Image titled Take an Ankle Brachial Index Step 8
    3
    Locate the dorsalis pedis artery. The dorsalis pedis (DP) artery is located on the upper surface of the foot, right near where the foot meets the ankle. Spread ultrasound gel on this upper area of the foot. Use a Doppler probe to located the strongest point of the DP. Move the probe around until your find the spot where the pulse is the loudest. You should hear a pulsating or whooshing sound.
  4. Image titled Take an Ankle Brachial Index Step 9
    4
    Record the blood pressure of the DP artery. Inflate the blood pressure cuff to about 20 mmHg above the patient’s regular systolic pressure or until the whooshing sound from the Doppler is gone. Deflate the cuff and take note when the whooshing sound returns. This is the systolic blood pressure of the ankle.
  5. Image titled Take an Ankle Brachial Index Step 10
    5
    Find the posterior tibial (PT) artery. For the most accurate ABI, you should take the blood pressure of both the dorsalis pedis and posterior tibial arteries. The PT is located about one-fourth of the way up the back side of the calf. Place ultrasound gel on the area and use the Doppler probe to find the spot where the PT pulse is the strongest.
  6. Image titled Take an Ankle Brachial Index Step 11
    6
    Record the blood pressure of the PT artery. Repeat the same process that you did to find the DP artery. Once finished, record the pressure and then switch the cuff to the right leg. Record the blood pressure of the dorsalis pedis and posterior tibial arteries on the right leg.[7]
    7. Advertisement
Part 3
Part 3 of 3:

Calculating the Ankle Brachial Index (ABI)

  1. Image titled Take an Ankle Brachial Index Step 12
    1
    Take note of the higher systolic blood pressure of the ankle. Compare the left and right ankle readings, as well as the DP and PT artery readings of both ankles. Whichever number is the highest from each ankle will be used to calculate the ABI.
  2. Image titled Apply Shoulder Injury Compression Wraps Step 3
    2
    Divide the systolic blood pressure of the ankle by the systolic blood pressure of the arm. You will calculate the ABI for each leg individually. Use the highest value from your readings of the left ankle arteries and divide it by the value of the brachial artery. Then repeat this process with the results from the right ankle.[8]
    • Example: The systolic blood pressure of the left ankle is 120 and the systolic blood pressure of the arm is 100. 120/100=1.20.
  3. Image titled Take an Ankle Brachial Index Step 14
    3
    Record and interpret the result. The normal resting ankle brachial index is 1.0 to 1.4. The closer the ABI of the patient to 1, the better the result is. This means that the arm blood pressure should be as close as possible to the ankle blood pressure.[9]
    • An ABI of less than 0.4 suggests severe peripheral arterial disease. The patient may develop non-healing ulcer or gangrene.
    • An ABI of 0.41-0.90 indicates mild to moderate peripheral artery disease and warrants further tests like CT, MRI, or angiography.
    • An ABI of 0.91-1.30 indicates normal vessels. However, a value between 0.9-0.99 may cause pain during exercise.
    • An ABI >1.3 indicates non-compressible and severely calcified vessels that artificially raise the blood pressure. Long standing diabetes or chronic kidney disease may lead to this state.
    4. Advertisement

Warnings

  • If you have not been trained to use a blood pressure cuff, or to take blood pressure readings, you or the person you are helping should go to a doctor to get a certifiably accurate ABI reading.
    ⧼thumbs_response⧽
Advertisement

You Might Also Like

Take Blood Pressure Manually
How to
Take Blood Pressure Manually
Find Your Brachial Pulse
How to
Find Your Brachial Pulse
Check Blood Pressure with No Cuff
How to
Check Blood Pressure with No Cuff
Raise Blood Pressure
How to
Raise Blood Pressure
Flush Salt Out of Your Body
How to
Flush Salt Out of Your Body
Take Orthostatic Blood Pressure
How to
Take Orthostatic Blood Pressure
Read Blood Pressure
How to
Read Blood Pressure
Raise Low Blood Pressure
How to
Raise Low Blood Pressure
Calculate Mean Arterial Pressure
How to
Calculate Mean Arterial Pressure
Treat Low Blood Pressure Naturally
How to
Treat Low Blood Pressure Naturally
Read an Aneroid Manometer
How to
Read an Aneroid Manometer
Monitor Blood Pressure
How to
Monitor Blood Pressure
Advertisement

References

  1. ↑ http://www.mayoclinic.org/tests-procedures/ankle-brachial-index/basics/definition/prc-20014625
  2. ↑ http://www.healthline.com/human-body-maps/brachial-artery
  3. ↑ https://stanfordmedicine25.stanford.edu/the25/ankle-brachial-index.html
  4. ↑ http://www.diffen.com/difference/Systolic_vs_Diastolic
  5. ↑ http://www.merriam-webster.com/dictionary/manometer
  6. ↑ https://stanfordmedicine25.stanford.edu/the25/ankle-brachial-index.html
  7. ↑ https://stanfordmedicine25.stanford.edu/the25/ankle-brachial-index.html
  8. ↑ https://stanfordmedicine25.stanford.edu/the25/ankle-brachial-index.html
  9. ↑ http://www.webmd.com/heart-disease/ankle-brachial-index-test

About This Article

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 15 people, some anonymous, worked to edit and improve it over time. This article has been viewed 255,930 times.
40 votes - 92%
Co-authors: 15
Updated: October 17, 2022
Views: 255,930
Categories: Blood Pressure

Medical Disclaimer

The content of this article is not intended to be a substitute for professional medical advice, examination, diagnosis, or treatment. You should always contact your doctor or other qualified healthcare professional before starting, changing, or stopping any kind of health treatment.

Article SummaryX

An ankle brachial index, or ABI, measures the ratio of the blood pressure in the lower leg or ankle to the blood pressure in the arm. To measure someone’s ABI first have them lie down and rest for at least 10 minutes so their blood pressure can normalize. When you’re ready to take the measurement, wrap the blood pressure cuff around their left arm, about 2 inches above their elbow bend. Then, place the stethoscope on the brachial pulse and inflate the cuff until the sound of their pulse is no longer audible. Once you’ve measured their pulse, slowly deflate the cuff while watching the pressure gauge. While you do this, listen for when the pulsating sound returns, which is the systolic blood pressure, and when it disappears again, which is the diastolic blood pressure. To learn how to calculate the index once you have your numbers, read on!

Did this summary help you?
Advertisement