Automated fare collection

AFC systems often consist of the following components[1] (the "tier" terminology is common, but not universal):

• Tier 0 – Fare media
• Tier 1 – Devices to read/write media
• Tier 2 – Depot/station computers
• Tier 3 – Back office systems
• Tier 4 – Central clearing house

In addition to processing electronic fare media, many AFC systems have equipment on vehicles and stations that accepts cash payment in some form.

Devices to read/write media

These take numerous forms, including:

• Ticket office terminals – where a media holder can purchase a right to travel from staff in an office, or enquire as to the value and travel rights associated with the media

General ticketing machines at the Expo station in Singapore, where commuters can add value to their EZ-Link card or purchase a single trip ticket.

• Ticket vending machines – where a media holder can purchase a right to travel from a self-service machine, or enquire as to the value and travel rights associated with the media
• Fare gate – often used in a train station so a media holder can gain access to a paid area where travel services are provided
• Stand-alone validator – used to confirm that the media holds an appropriate travel right, and to write the usage of the media onto the media for later verification (e.g. by a conductor/inspector). Often used in proof-of-payment systems.
• On-vehicle validator – used by a media holder to confirm travel rights and board a vehicle (e.g. bus, tram, train)
• Inspector/conductor device – used by staff such as a conductor to verify travel rights

Unattended devices are often called "validators", a term which originated with devices that would stamp a date/time onto paper tickets to provide proof of valid payment for a conductor.

Compass fare gates that are used at train stations across the Metro Vancouver Regional District

Canada's first public transit agency, the Toronto Street Railway Co., started in 1861 with a horse-drawn streetcar service but it was not until 1912 that the City of Toronto began deliberations on fare collection.[2] It was not until 126 years later (in 1987) that Mississauga Transit became one of the first Transit Agencies in Canada to implement an Electronic Farebox.[3] Since then, almost every major city in Canada has adopted use of electronic fare boxes.

Notably, Canada also produces fare collection devices for various transit agencies in North America. Trapeze Group., located in Mississauga, Ontario, currently manufactures and develops high tech fare collection solutions.

Turnstiles on the MBTA used for automated fare collection.

The first faregates in the United States were installed experimentally in 1964 at Forest Hills and Kew Gardens Long Island Rail Road stations in Queens;[4] the first systemwide installation was on Illinois Central Railroad (IC) in 1965 for its busy Chicago commuter service (today's Metra Electric.) Financed entirely from private funds, AFC was expected to reduce operating costs by decreasing on-board crew sizes and eliminating station agents at all but the busiest stations. Cubic’s IC system featured entry-exit swipes (NX) to enforce zonal fare structures, checks against fraud, used ticket collection, and ridership/revenue data collection capabilities.[5] It served as a prototype for the San Francisco Bay Area Rapid Transit (BART),[6] Washington Metropolitan Area Transit Authority (WMATA),[7] and Philadelphia’s Port Authority Transit Corporation (PATCO) Lindenwold Line NX-zonal AFC systems.[8] These railroad-style systems required complex computer data processing on faregates or remotely on a central computer, and thus were not suitable for buses. Similar systems are still in use on Japan and Taiwan’s commuter railroads, and the London Underground.[9]

Metropolitan Atlanta Rapid Transit Authority (MARTA)’s desire for simpler AFC systems resulted in Duncan (traditionally a parking meter vendor) developing turnstile machines for entry-only subway fare collection. Chicago Transit Authority (CTA)’s ChicagoCard, Boston Massachusetts Bay Transportation Authority (MBTA)’s previous generation “T-Pass”, and New York City Transit (NYCT)’s MetroCard systems could all be considered MARTA’s 1977 system’s conceptual descendants.

Bus fareboxes had hitherto been much simpler devices, mechanically registering coins deposited on accumulating registration counters. Duncan’s 1973 “Faretronic” farebox was the first to electronically count coins and collect revenue/ridership data by fare class. Keene quickly followed suit, introducing a design meeting Urban Mass Transit Administration (UMTA) Section 15 reporting requirements, also collecting fuel consumption and bus mileage data.[10] In New York, mechanical fareboxes were preferred for ease of maintenance until widespread deployment of Cubic's MetroCard for buses in 1997. Venerable GFI fareboxes featuring magnetic pass readers requiring cash single fares lasted in Boston until Scheidt-Bachmann’s CharlieCard was introduced in 2006.

This is a list of a few notable AFC systems. (See List of smart cards for a comprehensive list of AFC and other systems based on contactless smart cards.)

• Calypso, an international electronic ticketing standard, originally designed by a group of transit operators
• CIPURSE, is an open security standard for transit fare collection systems