Barium oxide

Barium oxide, also known as baria, is a white hygroscopic non-flammable compound with the formula BaO. It has a cubic structure and is used in cathode ray tubes, crown glass, and catalysts. It is harmful to human skin and if swallowed in large quantity causes irritation. Excessive quantities of barium oxide may lead to death.

"BaO" redirects here. For other uses, see BAO (disambiguation) and Bao (disambiguation).
Barium oxide
Names
Other names
  • Neutral barium oxide (1:1)
  • Barium protoxide
  • Calcined baryta
  • Baria
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.013.753
EC Number
  • 215-127-9
RTECS number
  • CQ9800000
UNII
UN number 1884
  • InChI=1S/Ba.O checkY
    Key: QVQLCTNNEUAWMS-UHFFFAOYSA-N checkY
  • InChI=1/Ba.O/rBaO/c1-2
    Key: QVQLCTNNEUAWMS-FXUTYLCTAB
  • [Ba]=O
Properties
BaO
Molar mass 153.326 g/mol
Appearance white solid
Density 5.72 g/cm3, solid
Melting point 1,923 °C (3,493 °F; 2,196 K)
Boiling point ~ 2,000 °C (3,630 °F; 2,270 K)
  • 3.48 g/100 mL (20 °C)
  • 90.8 g/100 mL (100 °C)
  • Reacts to form Ba(OH)2
Solubility soluble in ethanol, dilute mineral acids and alkalies; insoluble in acetone and liquid ammonia
-29.1·10−6 cm3/mol
Structure
cubic, cF8
Fm3m, No. 225
Octahedral
Thermochemistry
47.7 J/K mol
70 J·mol−1·K−1[1]
−582 kJ·mol−1[1]
Hazards
GHS labelling:
GHS05: CorrosiveGHS06: ToxicGHS07: Exclamation mark
Danger
H301, H302, H314, H315, H332, H412
P210, P220, P221, P260, P261, P264, P270, P271, P273, P280, P283, P301+P310, P301+P312, P301+P330+P331, P302+P352, P303+P361+P353, P304+P312, P304+P340, P305+P351+P338, P306+P360, P310, P312, P321, P330, P332+P313, P362, P363, P370+P378, P371+P380+P375, P405, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamond
3
0
0
Flash point Non-flammable
Related compounds
Other anions
Other cations
Supplementary data page
Barium oxide (data page)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)
Infobox references

It is prepared by heating barium carbonate with coke, carbon black or tar or by thermal decomposition of barium nitrate.

Uses

Barium oxide is used as a coating for hot cathodes, for example, those in cathode ray tubes. It replaced lead(II) oxide in the production of certain kinds of glass such as optical crown glass. While lead oxide raised the refractive index, it also raised the dispersive power, which barium oxide does not alter.[2] Barium oxide also has use as an ethoxylation catalyst in the reaction of ethylene oxide and alcohols, which takes place between 150 and 200 °C.[3]

It is also a source of pure oxygen through heat fluctuation. It readily oxidises to BaO2 by formation of a peroxide ion. The complete peroxidation of BaO to BaO2 occurs at moderate temperatures but the increased entropy of the O2 molecule at high temperatures means that BaO2 decomposes to O2 and BaO at 1175K.[4] The reaction was used as a large scale method to produce oxygen before air separation became the dominant method in the beginning of the 20th century. The method was named the Brin process, after its inventors.[5]

Preparation

Barium oxide is made by heating barium carbonate at temperatures of 1000–1450 °C. It may also be prepared by thermal decomposition of barium nitrate.[6] Likewise, it is often formed through the decomposition of other barium salts.[7]

2Ba + O2 → 2BaO
BaCO3 → BaO + CO2

Safety issues

Barium oxide is an irritant. If it contacts the skin or the eyes or is inhaled it causes pain and redness. However, it is more dangerous when ingested. It can cause nausea and diarrhea, muscle paralysis, cardiac arrhythmia, and can cause death. If ingested, medical attention should be sought immediately.

Barium oxide should not be released environmentally; it is harmful to aquatic organisms.[8]

See also
  • Barium – chemical element with symbol Ba and atomic number 56

References
  1. Zumdahl, Steven S. (2009). Chemical Principles 6th Ed. Houghton Mifflin Company. ISBN 978-0-618-94690-7.
  2. "Barium Oxide (chemical compound)". Encyclopædia Britannica. Encyclopædia Britannica. 2007. Retrieved 2007-02-19.
  3. Nield, Gerald; Washecheck, Paul; Yang, Kang (1980-07-01). "United States Patent 4210764". Retrieved 2007-02-20.
  4. S.C. Middleburgh; K.P.D. Lagerlof; R.W. Grimes (2012-09-29). "Accommodation of Excess Oxygen in Group II Oxides". Journal of the American Ceramic Society. Retrieved 2022-03-27.
  5. Jensen, William B. (2009). "The Origin of the Brin Process for the Manufacture of Oxygen". Journal of Chemical Education. 86 (11): 1266. Bibcode:2009JChEd..86.1266J. doi:10.1021/ed086p1266.
  6. Pradyot Patnaik. Handbook of Inorganic Chemicals. McGraw-Hill, 2002, ISBN 0-07-049439-8
  7. "Compounds of barium: barium (II) oxide". Web Elements. The University of Sheffield. 2007-01-26. Retrieved 2007-02-22.
  8. "Barium Oxide (ICSC)". IPCS. October 1999. Archived from the original on 26 February 2007. Retrieved 2007-02-19.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.