Road signs in Ireland

The former 'fingerpost' style of Irish directional signs can still be seen in many rural areas of the Republic of Ireland. These signs differ from their modern-day equivalent as they have black raised text on a white background. Destinations are in all caps (the placename in Irish was on top and in a smaller font than the one in English). Sometimes, the former route number ("T" for trunk road, "L" for link road) can be seen, and the former Bord Fáilte logo can be seen on some (they had responsibility for signs for a time), as well as occasionally a harp. Distances on these signs are in miles.

This style of sign has become a common feature of many tourist images of Ireland and can be seen in some Irish pubs. However, they can be easily rotated, and have been done so on occasion and therefore are not completely reliable. While most examples of these signs still in situ are rural finger-posts, the advance directional sign of this era can still very occasionally be seen: this has a grey background, with the destinations in outlined, white-background boxes linked together with black lines, and the text is not raised on these, unlike on fingerposts. These signs, rare even when the system was in use, can be seen in some areas of Dún Laoghaire and Drogheda. These signs were prescribed under various regulations, with the final design prescribed under the Road Traffic Signs (Regulations) 1962.[5]

Early bilingual A.A. fingerpost sign

19th-century directional sign in Lismore, County Waterford; it gives distances in miles, furlongs and perches.

Advance directional sign used pre-1975. This sign has since been removed.

Despite the new sign style being introduced in 1977, the design change was never legislated for (apart from a reference to the change to italics in 1989) and the old designs were repealed only under the 1997 regulations, 20 years later.

The first generation of the current sign system, introduced in 1977, can also be seen in on some national roads (and also on the oldest stretch of the M1). This is similar to the current system, but the signs are simpler, a different shade of green is used, and the Irish place names are not in italics. These signs were directly based on the Worboys Committee designs which had been adopted in the UK in 1965. These signs were replaced by the current system on 1 January 1989.[6] The design of signs has continued to evolve with the introduction of patching under the Guildford Rules in 1994 and the introduction of cantilever directional signs in 2005, as well as the expansion in gantry signs since then.

"Compass-point directions" (such as "The North, "The South" and "The West") were formerly used, particularly in Dublin where the road network intersects. This system, inherited from the UK system, was permitted in the 1996 TSM but subsequently prohibited in the 2010 TSM, which mandated the use of the terminal destination and next primary destination of the route instead. Today there remain very few examples, one notably on George's Quay.

The original design (1983–1989) of Republic of Ireland motorway signs were a simpler version of the UK design. These signs were only ever in use on the M7 Naas Bypass and M1 Airport Motorway and only rare examples are still in situ.

From 1989–2005, signs on motorways were nearly identical to that on UK motorways (but see new motorway signs, below); although in the Republic of Ireland, motorway junctions were not always numbered, or the number was not always signposted. The sign at the actual exit, which in the UK shows the road number to be reached, was replaced by a flag sign with the destination instead. On the M50, in the case of junctions with national routes, the initial advance direction sign was replaced with a list of destinations for that national route. The 1989 design of signs can still be seen on older sections of the M4 and M7.

In 2005, upon the opening of the South Eastern Motorway section of the M50, the National Roads Authority erected new style gantry signs. The new signs retained typical colours and fonts but differed from older side of road signs in that they used separate overhead panels for each lane, headed with the route number in each case as well as new half-gantry signs closer to the exit. The new signs were also erected on the N2 Finglas–Ashbourne scheme and N7 Clondalkin–Naas scheme. These were the first roads in Ireland where overhead gantry signs have been used as a matter of course, instead of just very major junctions. Drivers are given clear advanced warning 1 km ahead of an upcoming junction. A half gantry at the junction then directed them to their destination. The new style signs are visually clearer than older type signs with drivers able to read the gantry signs from a distance of approximately 300 m on a straight stretch of road. Despite their significant advantages, the new gantry signs caused confusion because the downward arrows over the left traffic lanes seemed to indicate to drivers that they should pull out into the right lane if they wish to continue on the motorway or dual carriageway, breaking the keep left rule.

In July 2007, some of the gantry signs on the M50 between Junctions 13–17 erected in 2005 were replaced with signs in a revised style, reverting to a single panel over the mainline. By March 2008 all the 2005 style gantries had been removed from the M50 (and were later removed from the N2 and N7). The one aspect of the 2005 scheme that was retained is the half-gantry (or cantilever) sign just before the exit, which has now also been extended to other roads. A second change introduced in 2007 is that the flag sign at the gore, which previously listed the primary destinations to be reached, now features the junction number and the word "Exit" instead. This revised scheme has been used on most motorway and high-quality dual carriageway schemes since 2007. The "Next Exit" signs listing destinations, which were originally used only on the M50, are now extended to other motorways.

Old yield sign in Culdaff, Inishowen.

Although differing from the design originally laid down (see Regulatory signs), "Keep Left" and "Keep Right" signs are now mostly white on a blue background, on the British pattern. In order to avail themselves of standard designs from British suppliers, local authorities had made extensive use of the white-on-blue design, mostly because the electronically lit type of white-on-blue was more practical, in consequence of which legislation was enacted making both patterns legal. Under the Irish Power of One (energy conservation campaign) the electronic signs are being gradually replaced by reflective signs. The former "No Entry" sign, a prohibition sign with an upward-pointing arrow, was replaced with the international standard red disk in TSM 2010. However the older version, now termed "No Straight Ahead", may be used when combined with a time or other restriction.

The Republic of Ireland's 'Yield' sign formerly read 'Yield Right of Way', and many of this older variant can still be seen around the State.

On 20 January 2005, imperial speed limits on signs were replaced with metric speed limits. Around 35,000 existing signs were modified or replaced and a further 23,000 new signs were erected bearing the speed limit in kilometres per hour. To avoid confusion with the old signs, all speed limit signs include the mention "km/h" beneath the numerals.[7] Distances, such as those shown on route confirmatory signs, had already been displayed in kilometres since the 1970s. Due to the two speed limits possible on non-urban roads after 2005 metrication, the "end of speed limit" signs in Ireland (a white circle with black diagonal line as used in the UK) is no longer used – the end of an urban speed restriction is signalled by the sign displaying the limit for the following section.

Before adoption of the 1956 traffic signs regulations, warning signs accorded to a standard laid out in the 1926 Road Signs and Traffic Signals Regulations.[8] These signs, unlikely to exist in situ anywhere in the Republic of Ireland nowadays, were similar to signs used in the United Kingdom at that time.

The signs were cast-iron plates, with raised type painted black on yellow. A square pictogram illustrated the hazard, and the type of hazard was written in both Irish, with traditional typeface, and English. A hollow red triangle normally surmounted the pole to which the sign was attached.

The Transport and Motorway typefaces are used on Irish road signs. Although it was designed uniquely for dark text on light backgrounds, the Transport Heavy weight is used for all signs in Ireland. A distinctive oblique variant of Transport Heavy is used for Irish text, in which letters are inclined at 15 degrees. The letter a is represented by script a (ɑ), and the letter i was represented by dotless i (ı) in order to better differentiate them from their accented forms; however, the normal letter i is now always used. Additionally, the capitals M, N and A are similar in appearance to lowercase m, n and a.

The Irish text is placed above the corresponding English and is always in mixed case. All English text is in upper case Roman alphabet.

Motorway signs use white text on a blue background. National routes (both primary and secondary) use white text on a green background, with the specific route number in yellow text. Regional and local county roads use black text on white background. Signs to points of interest (services, institutions, tourist sights) have white text on a brown background. Patching (according to the Guildford Rules) is used to show roads of different classification on signs.

A number of types of sign are available for use on all purpose roads. Chapter 2 of the TSM divides directional information signs into six categories:

1. Stack Type Advance Direction Signs
Destinations are signposted in advance of at-grade roads, such as T junctions and staggered crossroads, where the destinations are placed on separate panels.
2. Map Type Advance Direction Signs
Destinations are signposted in advance of grade separated interchanges and roundabouts, where the junction is displayed as a pictogram. These are sometimes used at at-grade roads in exceptional circumstances.
3. Direction Signs / Flag Signs
These are located at the road junction itself. The sign has a triangular point at one end and a chevron, and can also appear in the form of a fingerpost, particularly on rural roads.
4. Overhead Gantry and Exit Taper Gantry Signs
Destinations are signposted in advance on signs mounted on gantry structures
5. Route Confirmatory, Route Marker and Route Direction Signs
These provide confirmation and information to drivers about the destinations and route ahead.
6. Other directional information signs, such as Next Exit Signs (which provide a list of destinations to take at the next exit) and Lane Destination Signs

However, on rural roads, it is common for the appropriate signs to be missing. Often junctions are signed with only a fingerpost.

Generally directional signs on major routes show major or end destinations. Smaller towns and placenames are shown only on signs nearer to that location. Only the Irish place name is shown if the sign is in the Gaeltacht, or the official name in English is identical to the Irish name or nearly so (for example Dún Laoghaire or Port Laoise). Due to the practice of signposting in both languages, usually a limited number of destinations will be signposted. If a destination can be reached by following a route which is a spur from that route, the destination and route number will be shown in brackets. Also, distances are shown in kilometres.

Destinations on motorways and high-quality dual carriageways are signposted as follows:

• 2 km – Next Exit Sign, listing destinations to be reached by this exit
• 1 km – Advance Directional Sign (map type or gantry)
• 500 m – Advance Directional Sign (map type or gantry)
• Beginning of exit taper (deceleration lane) – Exit Taper Gantry Sign
• Gore – Exit Sign with junction number
• 500 m following exit – Route Confirmatory Sign

At the entrance to Irish motorways, a "Motorway Ahead" sign is posted, listing the motorway regulations. The motorway speed limit is similarly posted on the slip-road.

• 
  Map Type Advance Direction Sign (motorway)
• 
  Map Type Advance Direction Sign (national road)
• 
  Map Type Advance Direction Sign (regional road, roundabout)
• 
  Stack Type Advance Direction Sign (regional road)
• 
  Direction Sign (regional road)
• 
  Overhead Gantry Sign (motorway)
• 
  Route Confirmatory Sign (national road)
• 
  Next Exit Sign (motorway)
• 
  Lane Destination Sign (national road)