Sodium tellurite

Sodium tellurite
Names
	Other names Sodium Tellurite IV, Tellurous acid disodium salt
Identifiers
CAS Number	10102-20-2 ;
3D model (JSmol)	Interactive image;
ChemSpider	23309 ;
ECHA InfoCard	100.030.231
EC Number	233-268-4;
PubChem CID	24935;
RTECS number	WY2450000;
UNII	0BB57LA23Y ;
UN number	3288
CompTox Dashboard (EPA)	DTXSID2064943 ;
	InChI InChI=1S/2Na.H2O3Te/c;;1-4(2)3/h;;(H2,1,2,3)/q2+1;/p-2 Key: VOADVZVYWFSHSM-UHFFFAOYSA-L ; InChI=1/2Na.H2O3Te/c;;1-4(2)3/h;;(H2,1,2,3)/q2+1;/p-2 Key: VOADVZVYWFSHSM-NUQVWONBAS;
	SMILES [Na+].[Na+].[O-][Te]([O-])=O;
Properties
Chemical formula	Na2TeO3
Molar mass	221.57774 g/mol
Appearance	white crystals, powder
Density	6.245 g/cm3
Melting point	710 °C (1,310 °F; 983 K)
Solubility in water	soluble ; greater than or equal to 100 mg/mL at 68°F
Structure
Crystal structure	rhombic
Hazards
	GHS labelling:
Pictograms
Signal word	Danger
Hazard statements	H300, H301, H311, H330, H331
Precautionary statements	P260, P261, P264, P270, P271, P280, P284, P301+P310, P302+P352, P304+P340, P310, P311, P312, P320, P321, P322, P330, P361, P363, P403+P233, P405, P501
	Lethal dose or concentration (LD, LC):
LD50 (median dose)	83 mg/kg (rat, oral)
	Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). verify (what is ?) Infobox references

Sodium tellurite is an inorganic tellurium compound with formula Na₂TeO₃. It is a water-soluble white solid and a weak reducing agent. Sodium tellurite is an intermediate in the extraction of the element, tellurium; it is a product obtained from anode slimes and is a precursor to tellurium.

Preparation

The main source of tellurium is from copper anode slimes, which contain precious metals as well as various tellurides. These slimes are roasted with sodium carbonate and oxygen to produce sodium tellurite.[1]

Ag₂Te + Na₂CO₃ + O₂ → 2Ag + Na₂TeO₃ + CO₂ (400–500 °C)

This is a reaction with silver telluride. The telluride is oxidized to tellurite and the silver(I) is reduced to silver.

Purification

The electrolysis of a tellurite solution yields purified tellurium.[1]

Anode: 4OH⁻ → 2H₂O + O₂ + 4e⁻

Cathode: TeO₃²⁻ + 3H₂O + 4e⁻ → Te + 6OH⁻

Structure and properties

Tellurium has properties similar to sulfur and selenium. In the anhydrous form Na₂TeO₃ the tellurium atoms are 6 coordinate, three Te-O at 1.87 Å and three at 2.9 Å, with distorted octahedra sharing edges.[2] In the pentahydrate, Na₂TeO₃.5H₂O there are discrete tellurite anions, TeO₃²⁻ which are pyramidal. The Te-O distance is 1.85 - 1.86 Å and the O-Te-O angle is close to 99.5°.[3] The tellurite anion is a weak base. Sodium tellurite would be similar to sodium selenite and sodium sulfite. Sodium tellurite is both a weak oxidizing agent and a weak reducing agent.

Tellurite-related reactions

H₂TeO₃ → H⁺ + HTeO₃⁻ pK 2.48

Telluric acid loses a proton at this pKa.

HTeO₃⁻ → H⁺ + TeO₃²⁻ pK 7.7

Hydrogen tellurite loses a proton at this pKa to become the tellurite ion. This would happen in the reaction of tellurous acid with sodium hydroxide to make sodium tellurite.

TeO₂ + 2OH⁻ → TeO₃²⁻ + H₂O

This is the reaction of tellurium dioxide with a base to make a tellurite salt.

Applications

Sodium tellurite improves the corrosion resistance of electroplated nickel layers. Solutions of sodium tellurite are used for black or blue-black coatings on iron, steel, aluminum, and copper. In microbiology, sodium tellurite can be added to the growth medium to isolate bacteria with an inherent physiological resistance to its toxicity.[4]

References

Wiberg, Egon; Holleman, Arnold Frederick (2001). Nils Wiberg (ed.). Inorganic chemistry. translated by Mary Eagleson. Academic Press. p. 588. ISBN 0-12-352651-5.
Masse, R.; Guitel, J.C.; Tordjman, I. (1980). "Preparation chimique et structure cristalline des tellurites de sodium et d'argent: Na₂TeO₃, Ag₂TeO₃". Materials Research Bulletin. 15 (4): 431–436. doi:10.1016/0025-5408(80)90048-3. ISSN 0025-5408.
"Etude cristallographique du tellurite de sodium à cinq molécules d'eau, Na₂Te^IVO₃·5H₂O". Acta Crystallogr. B. 35: 1337–1340. 1979. doi:10.1107/S0567740879006403.
Borsetti, Francesca; Toninello, Antonio; Zannoni, Davide (2003). "Tellurite uptake by cells of the facultative phototroph Rhodobacter capsulatus is a pH-dependent process." Federation of European Biochemical Societies. Volume 554, Issue 3, 20 November 2003, pp. 315–318. Elsevier B.V. doi:10.1016/S0014-5793(03)01180-3

Cameo Chemicals. Sodium Tellurite. Retrieved March 8, 2009. Website: http://cameochemical.noaa.gov/chemical/5185%5B%5D.
Knockaert, Guy (2002). "Tellurium and Tellurium Compounds". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a26_177.pub2.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[wiberg2001-1] Wiberg, Egon; Holleman, Arnold Frederick (2001). Nils Wiberg (ed.). Inorganic chemistry. translated by Mary Eagleson. Academic Press. p. 588. ISBN 0-12-352651-5.

[MasseGuitel1980-2] Masse, R.; Guitel, J.C.; Tordjman, I. (1980). "Preparation chimique et structure cristalline des tellurites de sodium et d'argent: Na₂TeO₃, Ag₂TeO₃". Materials Research Bulletin. 15 (4): 431–436. doi:10.1016/0025-5408(80)90048-3. ISSN 0025-5408.

[3] "Etude cristallographique du tellurite de sodium à cinq molécules d'eau, Na₂Te^IVO₃·5H₂O". Acta Crystallogr. B. 35: 1337–1340. 1979. doi:10.1107/S0567740879006403.

[4] Borsetti, Francesca; Toninello, Antonio; Zannoni, Davide (2003). "Tellurite uptake by cells of the facultative phototroph Rhodobacter capsulatus is a pH-dependent process." Federation of European Biochemical Societies. Volume 554, Issue 3, 20 November 2003, pp. 315–318. Elsevier B.V. doi:10.1016/S0014-5793(03)01180-3