How to Build a Ferrocement Tank

Ferrocement water tanks are durable, inexpensive, and easy to build. Keep reading for tips on how to take on this project yourself!

Method 1
Method 1 of 2:

Wall Construction Directions

  1. Image titled Build a Ferrocement Tank Step 1
    1
    Cut the chicken wire/hexagonal wire mesh using the wire cutters. The tank size will dictate the necessary sizes of the mesh.[1]
  2. Image titled Build a Ferrocement Tank Step 2
    2
    Cut the electro-welded mesh using the bolt cutters. The tank size will dictate the necessary sizes of the mesh.[2]
    Advertisement
  3. Image titled Build a Ferrocement Tank Step 3
    3
    Lay the chicken wire and electro-welded mesh flat to create layers. The layering should be as follows: 2 layers of chicken wire, 1 layer of electro-welded mesh, 2 layers of chicken wire.[3]
  4. Image titled Build a Ferrocement Tank Step 4
    4
    Using wire ties and the pliers, fasten the flat layers of mesh together.[4]
  5. Image titled Build a Ferrocement Tank Step 5
    5
    Know that once the mesh layers are securely fastened, roll one end of the mesh to the other and attach the two ends together using the wire ties. This will create the circular body structure of the tank walls.
  6. Image titled Build a Ferrocement Tank Step 6
    6
    Stand the mesh frame upright on the tank foundation and attach, using the wire ties, the frame to rebar protruding from the tank foundation.
  7. Image titled Build a Ferrocement Tank Step 7
    7
    Tie the reinforcement wire near the top of the mesh frame and connect the wire to the ground. Be sure that the wire is in tension. This will prevent the walls from buckling during the construction and concrete curing stages. Four reinforcement wires around the perimeter of the frame are sufficient.
  8. Image titled Build a Ferrocement Tank Step 8
    8
    Place scrap pipes as form placeholders for the inflow, outflow, overflow, and drainage pipe locations.[5]
  9. Image titled Build a Ferrocement Tank Step 9
    9
    Slap the concrete mortar onto the outside of the mesh frame. The mortar should be applied so that the holes of the mesh are completely filled.[6]
  10. Image titled Build a Ferrocement Tank Step 10
    10
    Allow the mortar to cure.[7]
  11. Image titled Build a Ferrocement Tank Step 11
    11
    Repeat step 9 with the inside of the mesh frame. Use a ladder when climbing in and out of the tank structure.
  12. Image titled Build a Ferrocement Tank Step 12
    12
    Allow the mortar to cure. Keep the walls wet during the curing process. Once all the mortar has been applied, the walls will be about 2 inches (5.1 cm) thick.
    13. Advertisement
Method 2
Method 2 of 2:

Roof Construction Directions

  1. Image titled Build a Ferrocement Tank Step 13
    1
    Cut the wood boards so that one edge is curved outward. This can be done while the tank walls are curing. The tank size will dictate the necessary sizes of the forms.
  2. Image titled Build a Ferrocement Tank Step 14
    2
    Once the walls are fully cured, position the wood beams inside the tank. One log will be the center pole sticking up vertically from the center of the foundation. Two logs will be cross bars near to the top of the walls to support the wooden roof forms. Additional vertical logs will also be used to support the wooden roof forms; these logs should be placed along the inside circumference of the walls.
  3. Image titled Build a Ferrocement Tank Step 15
    3
    Nail the cut wood board forms to the support poles. The wood will create a domed roof form.[8]
  4. Image titled Build a Ferrocement Tank Step 16
    4
    Nail the plywood sheets flat against the wood board forms.[9]
  5. Image titled Build a Ferrocement Tank Step 17
    5
    Leave one square space open in the forms. This will provide the tank lid opening.[10]
  6. Image titled Build a Ferrocement Tank Step 18
    6
    Lay concentric circle of rebar on top of the plywood sheets.
  7. Image titled Build a Ferrocement Tank Step 19
    7
    Tie supporting wires to the rebar circles using wire ties. The wires should run from the dome center down to the base of the roof.[11]
  8. Image titled Build a Ferrocement Tank Step 20
    8
    Place and tie chicken wire mesh to the supporting wires.
  9. Image titled Build a Ferrocement Tank Step 21
    9
    Slap concrete mortar mixture onto the roof forms. Be sure that enough concrete gets below the rebar circles.
  10. Image titled Build a Ferrocement Tank Step 22
    10
    Allow the concrete to cure. Keep the concrete wet during this process.
  11. Image titled Build a Ferrocement Tank Step 23
    11
    Once the concrete has cured, enter the tank through the open square space.
  12. Image titled Build a Ferrocement Tank Step 24
    12
    Carefully remove the wood beams, forms and plywood.
  13. Image titled Build a Ferrocement Tank Step 25
    13
    Paint the inside of the tank with the waterproof sealant.[12]
  14. Image titled Build a Ferrocement Tank Step 26
    14
    Install the square metal lid into the open space of to roof.
  15. Image titled Build a Ferrocement Tank Step 27
    15
    Optional: Paint the walls and roof of the ferrocement tank with any desired color.
    16. Advertisement

Community Q&A

  • Question
    What type of sealant is used inside the tank?
    Community Answer
    Community Answer
    Cement and ferro-cement are used.
Advertisement

Warnings

  • Caution: When working with concrete, the necessary safety precautions must be taken. Gloves, safety goggles, and face masks should be worn.
    ⧼thumbs_response⧽
Advertisement

Things You'll Need

Equipment

  • Wire Cutters
  • Bolt Cutters
  • Trowels
  • Wheelbarrow
  • Ladder
  • Drill
  • Pliers
  • Hand Saw
  • Electric Circular Saw (if electricity is available)
  • Hammers
  • Paintbrushes
  • Shovels

Materials

  • Chicken/Hexagonal Wire Mesh
  • Electro-welded Mesh
  • Wire Ties
  • 12 gauge Reinforcement Wire
  • Cement/Mortar Mixture
  • 12 mm Rebar
  • Wood Boards
  • Assorted Wood Beams (Logs)
  • Plywood Sheets
  • Metal Lid
  • Sika-1 Waterproof Sealant
  • Nails

For a ferrocement tank to be highly effective, the materials should be available locally. This allows for proper maintenance and tank sustainability.

You Might Also Like

Make a Pot in a Pot Refrigerator
How to
Make a Pot in a Pot Refrigerator
Figure How Many Gallons in a Tank
How to
Figure How Many Gallons in a Tank
Clean a Plastic Water Tank
How to
Clean a Plastic Water Tank
Build a Rainwater Collection System
How to
Build a Rainwater Collection System
Store Water Long Term
How to
Store Water Long Term
Collect Rainwater
How to
Collect Rainwater
Save Water15 Proven Ways to Save Water at Home
Read a Water Meter
How to
Read a Water Meter
Reuse Water from Your Washing Machine
How to
Reuse Water from Your Washing Machine
Collect Rainwater for Drinking
How to
Collect Rainwater for Drinking
Work Out Water Tank Capacity
How to
Work Out Water Tank Capacity
Prevent Algae in Rain Barrels7 Ways to Prevent Algae in Rain Barrels
Reduce Stormwater Runoff at Your Home
How to
Reduce Stormwater Runoff at Your Home
Clean an RV Fresh Water Tank
How to
Clean an RV Fresh Water Tank
Advertisement

References

  1. ↑ http://hydro.engr.scu.edu/files/shared/ferrocement_water_tanks.pdf
  2. ↑ http://hydro.engr.scu.edu/files/shared/ferrocement_water_tanks.pdf
  3. ↑ http://hydro.engr.scu.edu/files/shared/ferrocement_water_tanks.pdf
  4. ↑ http://hydro.engr.scu.edu/files/shared/ferrocement_water_tanks.pdf
  5. ↑ https://permaculturenews.org/2017/06/08/ferro-cement-water-tanks-affordable-diy-solution/
  6. ↑ https://permaculturenews.org/2017/06/08/ferro-cement-water-tanks-affordable-diy-solution/
  7. ↑ http://hydro.engr.scu.edu/files/shared/ferrocement_water_tanks.pdf
  8. ↑ http://www.cuvewaters.net/fileadmin/edit/Downloads/RFWH_Toolkit/5_CM1_Ferrocement-Tank_E.pdf
  9. ↑ https://www.unhcr.org/en-us/publications/operations/49d089a62/large-ferro-cement-water-tank-design-parameters-construction-details.html
  1. ↑ http://www.cuvewaters.net/fileadmin/edit/Downloads/RFWH_Toolkit/5_CM1_Ferrocement-Tank_E.pdf
  2. ↑ https://www.unhcr.org/en-us/publications/operations/49d089a62/large-ferro-cement-water-tank-design-parameters-construction-details.html
  3. ↑ http://www.i4at.org/surv/ferro.htm
  4. This document was written for technical writing class at the University of Maryland, College Park.

About This Article

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 10 people, some anonymous, worked to edit and improve it over time. This article has been viewed 95,665 times.
125 votes - 87%
Co-authors: 10
Updated: September 16, 2021
Views: 95,665
Categories: Water Conservation
Advertisement