How to Clean a Vacuum

Co-authored by Chris Willatt

Last Updated: April 29, 2021 References

Sometimes the dirtiest things in the house are the things that we use to clean it. Constant exposure to dirt and grime can make the vacuum cleaner a breeding ground for disease and bad odors. Though it might look daunting, cleaning the vacuum should not take long. There are a lot of parts to clean, but not all of them need to dealt with every time you spruce up your vacuum.

Part 1

Part 1 of 3:

Performing a Basic Cleaning

1
Read the vacuum’s instructions. There is a lot of variability between vacuums. Before cleaning yours, read the instructions for directions on how to break apart and clean your vacuum.^{[1]
X
Research source}
2
Unplug the vacuum. It can be hazardous to apply water to the vacuum when it is plugged in. None of these steps should be executed while the vacuum is plugged into an outlet, even if it is turned off.

Advertisement
3
Take apart the vacuum cleaner. You will need to be able to reach around all the insides of the vacuum to clean it up. Remove the canister and take the filter out. Break down any moving parts that can be deconstructed.^{[2]
X
Research source}
4
Empty the canister. Open the canister and drop the insides into a garbage bag. Consider performing this outside or in the garage to avoid spreading dust or dirt around your house. You might need to shake the canister to help jostle some of the dirt out of it.^{[3]
X
Research source}
5
Wet a cloth. Wet a microfiber cloth. Apply a little bit of all-purpose cleaner or vinegar mix to the cloth. Squeeze the cloth to remove all excess moisture.^{[4]
X
Research source}
6
Wipe down the vacuum. Use the cloth to rub down the outside and the inside of the canister. Wipe down all parts of the vacuum that are accessible, including the cord and the outside of the hose. Do not, however, apply moisture to the plug itself or any other electrified components.
7
Wash the filter. The filter is generally at the top of the canister and is one of the most important parts of the vacuum. Remove it from the canister and run cold water over it. Do not use soap. Let water run through it until no more dirt or grime is coming off.^{[5]
X
Research source}
8
Allow everything to dry in a warm spot for a day. It is particularly important that you not reinsert components of the canister, like the filter, until they have dried. Putting moist objects in a confined space can encourage the growth of bacteria. Leave the vacuum out in the sun, if possible.^{[6]
X
Research source}

Part 2

Part 2 of 3:

Cleaning the Beater Bar

1
Cut hair out of the beater bar. The beater bar, the bottom part of the vacuum where dirt is sucked in, often accumulates dirt and hair. Use scissors to cut and remove any hair that is stuck in the bristles.^{[7]
X
Research source}
- This part in the process can be particularly unsanitary. Consider wearing disposable gloves.
2
Disinfect the beater bar. Apply rubbing alcohol to a cotton swab. Then rub the cotton swab over the beater bar to disinfect it. Rub the cotton swab over other parts of the vacuum that come into contact with the floor.
- These areas are particularly susceptible to picking up dirt and disease because they are constantly coming into contact with dirtiest parts of your house.^{[8]
  X
  Research source}
- Try to avoid spreading alcohol on rubber pieces of the vacuum.^{[9]
  X
  Research source}
3
Spin the beater bar and continue disinfecting. For most models, you will need to use your hands to spin the beater bar around so that you can disinfect all sides of it. Some models will allow you to detach the beater ball, which will make it easier to reach all sides.^{[10]
X
Research source}
- Read instructions to see if your beater ball can be removed. It will make the process easier.

Part 3

Part 3 of 3:

Cleaning the Hose

1
Use a wire hanger to remove clogs. Straighten out a wire hanger leaving only a slight curve at the end. Insert it into the hose and use the curved end to scoop out any clumps of dirt that are clogging up the hose. Be careful not to poke at the hose itself; you do not want to poke a hole in it.^{[11]
X
Research source}
2
Dust the inside of the hose. Wrap a broom or mop handle in dryer sheets. Use duct tape to firmly attach the dryer sheets to the stick. Put the stick inside the hose and maneuver it so that the dryer sheets rub gently against the hose, picking up dust.
- Be gentle, so as to not break the hose.^{[12]
  X
  Research source}
3
Sanitize the hose with a vinegar solution. Tape paper towels to the end of a broom or mop handle. Wet the paper towels and apply a vinegar solution to them. Rub the inside of the hose with the paper towels to kill germs and reduce odor.^{[13]
X
Research source}
- For the vinegar solution mix one part vinegar to two parts water.
4
Allow the hose to dry for a day. Again, it is important that moisture does not get trapped in the canister. If you have sanitized the hose, allow it to sit in a warm spot for 24 hours to dry.^{[14]
X
Research source}

Expert Q&A

Question

How do I clean the dust out of my vacuum?

Chris Willatt
House Cleaning Professional
Chris Willatt is the owner and founder of Alpine Maids, a cleaning agency in Denver, Colorado started in 2015. Alpine Maids has received Angie's List Super Service Award for three years in a row since 2016 and has been awarded Colorado's "Top Rated Local House Cleaning" Award in 2018.

Chris Willatt

House Cleaning Professional

Expert Answer

Clean out the brush, for starters. You might need a screwdriver or a coin to open the compartment, then you can use a razor blade to cut through any hair or twine wrapped around the roller. Every so often, you can also clean the brush compartment with a sponge or microfiber cloth dipped in soap and water to remove all of the built-up grime.
Question

Can you clean a vacuum with water?

Chris Willatt
House Cleaning Professional
Chris Willatt is the owner and founder of Alpine Maids, a cleaning agency in Denver, Colorado started in 2015. Alpine Maids has received Angie's List Super Service Award for three years in a row since 2016 and has been awarded Colorado's "Top Rated Local House Cleaning" Award in 2018.

Chris Willatt

House Cleaning Professional

Expert Answer

If you have a bagless vacuum cleaner, you actually need to clean the compartment holding all the dust and grime with soap and water every now and then. If the filter is washable, wash it as well; otherwise make sure that you are always shaking it out or replacing.