Discovering a hole in your shirt can be frustrating. Fortunately, you don’t have to get rid of your shirt because of a minor hole. You can fix the hole in your shirt at home using a needle and thread or a patch. By using thread or fabric that matches the color of your shirt, no one will be able to tell that your shirt had a hole in it. However, there may be times you need to do a creative fix or hire a professional to get the hole fixed satisfactorily.

Method 1
Method 1 of 3:

Hand Sewing

  1. 1
    Get thread that matches your shirt. Choose thread that’s the same color as the shirt you want to fix so that your work doesn't stand out. You can also use clear thread that will be invisible on your shirt.[1]
    • Check to see if you already have any thread that matches your shirt. If you don't, take your shirt with you to a fabric store and find the thread that most closely matches your shirt.
    • If you can’t find an exact match, go with a darker thread rather than a lighter one. A darker color that is still similar to the shirt's color is likely to blend in and not be noticeable.
    • Use a matte thread and avoid thread that is reflective or shiny. Matte thread will be less noticeable.
  2. 2
    Thread a needle with your chosen thread. Use scissors to cut off a piece of thread from the spool that's about 24 inches (61 cm) long. Insert one end of the thread through the small hole at the head of the needle. Pull the thread through the hole until the two ends of the thread are the same distance from the needle. Tie the two ends of the thread together in a knot.[2]
    • Look on the packaging of the needles to ensure you choose one that's right for the fabric you're using. The smaller the gauge, the larger the number. 8 gauge needles are very thick, so they're best for heavy-weight woven garments, whereas 16 gauge needles are very thin, making them great for delicate, lightweight fabrics.[3]
    • Try dampening the tip of the thread by placing it on the tip of your tongue briefly if you're having trouble getting it through the needle hole.
    Advertisement
  3. 3
    Start your stitch inside your shirt. Poke the needle through the fabric at the top and to the right of the hole from the inside out. Poke through the fabric about .2 inches (0.51 cm) above the hole. If you’re any closer to the hole, the thread may pull out and your stitch could fall apart.[4]
    • Keep pulling the needle up through the fabric until the knot you made at the end of the thread catches on the fabric.
  4. 4
    Push the needle down through the hole and then back up through the fabric. Position the needle directly to the left of where you first poked the needle through. The closer you are to the previous stitch, the more secure the thread holding the hole together will be when you’re finished. This will allow you to pull the fabric on the left and right sides of the hole together.[5]
    • The goal is to make close stitches that pull the sides of the hole back together.
  5. 5
    Continue alternating stitches between the left and right side of the hole. Repeat your stitches back and forth across the hole. Bring the needle down through the hole in your shirt and poke it up through the fabric directly to the side of the first stitch you made. Make your way down the perimeter of the hole as you’re making the stitches. As you sew back and forth along the hole, the edges of the hole should get pulled together.[6]
    • Remember, after each stitch keep pulling the needle up until the thread is tight.
    • Stop sewing once you reach the bottom point of the hole and it’s completely sewn together.
  6. 6
    Bring the needle inside your shirt and tie several knots with the thread. Tie the knots so they’re right up against the fabric on the inside of your shirt. To tie the knots, hold the needle between 2 fingers. Wrap the part of the thread coming out of your shirt around the needle 3 times. Pull the needle up through the 3 loops and continue pulling until all the thread has been pulled through.[7]
    • Repeat to create more knots. Having multiple knots will ensure that the stitches stay in place.
  7. 7
    Cut off any extra thread. Use scissors to cut off the leftover thread after the knot you tied. Then examine the stitched hole to make sure it has been completely fixed.
  8. Advertisement
Method 2
Method 2 of 3:

Patching

  1. 1
    Find fabric that matches your shirt. If your shirt has a large hole that is 1–2 inches (2.5–5.1 cm) wide, you can fix it by putting a patch over it. If the shirt is a solid color, look for fabric in that color. If your shirt has a busy print, look for fabric that will blend in with the print. If you have to choose between a darker and lighter shade fabric, go with the darker shade. It will be less noticeable on your shirt.[9]
    • You can get fabric at your local fabric store, or you can use fabric from an old garment you don’t wear anymore.
    • If your shirt has a pocket on it, you can cut a piece of the inside of the pocket that will perfectly match the shirt. However, you will then need to patch the inside of the pocket with another piece of fabric.[10]
    • Make sure the texture and weight of the fabric you use are similar to the fabric your shirt is made out of.
  2. 2
    Cut out a patch of the fabric that’s slightly larger than the hole. Try to make the patch around .5 inches (1.3 cm) greater than the hole on all sides. Measure the hole in your shirt with a ruler so you know how big of a patch to cut out. Draw the outline of the patch on the fabric in pencil and cut it out with scissors.[11]
  3. 3
    Cut out a piece of fusible bonding web that’s the same size as the patch. Fusible bonding web is a thin, transparent adhesive sheet that will help the patch of fabric stick to the inside of your shirt. Place the patch of fabric you cut out over a sheet of fusible bonding web and trace the patch onto the bonding web with pencil. Remove the patch of fabric and use scissors to cut out the shape you traced.[12]
    • You can find fusible bonding web online or at your local fabric store.
  4. 4
    Cut out the center of the fusible webbing. You only want to have the webbing where the patch touches the fabric, not in the area of the hole you are covering. To do this, place the bonding web over the hole so the hole is centered. Trace the outline of the hole with a pen or pencil onto the webbing. Then use scissors to cut out the outline.[13]
    • When you are done cutting, you should keep the outer piece of webbing. It should have at least .25 inches (0.64 cm) of bonding web on each side of the hole. The circle that you cut out of the center can be thrown away or used for a future project.
  5. 5
    Turn your shirt inside out and place the fabric and bonding web over the hole. The bonding web should be placed in between the hole and the patch of fabric. Make sure the bonding web is lined up over the hole in your shirt so that it can't be seen through the hole. The side of the fabric you want to show through on the outside of your shirt should be facing down.[14]
  6. 6
    Iron the patch of fabric and bonding web onto your shirt. Press the iron down onto the patch and bonding web and hold it in place. Don’t iron back and forth or the patch and bonding web could shift. Hold the iron on the patch and bonding web for around 10 seconds.[15]
    • Read the instructions that came with your fusible bonding web for specific heating and timing instructions.
    • In general, use a heat setting for bonding that is a little higher than the heat you would normally use for the fabric of your shirt.
    • After you iron on the patch and bonding web, turn your shirt right side out and the hole should be covered!
  7. Advertisement
Method 3
Method 3 of 3:

Creative Alternatives

  1. 1
    Do a creative fix with embroidery or decorative patches. If you have a shirt that you love and it has a lot of holes, consider using a creative fix to make it usable and unique. For example, you could embellish the hole by embroidering around it. Stitches all around the hole will stabilize the fabric and add a creative touch.
    • You can also put an applique over the hole. Putting a decorative patch over the hole, instead of trying to match the existing fabric, can add a bit of fun to an otherwise subdued shirt.
  2. 2
    Use glue to fix a hole that's not very visible. If you do not know how to sew or you just don't want to, there are still options for fixing your shirt. There are a variety of glue products that are made to glue fabric together and these can be used on your shirt. In fact, if the hole in your shirt is on a seam or in a spot that is not visible, using glue may be the quickest and easiest fix.[16]
    • Go to your local craft or sewing store and look for products made to glue fabric to fabric.
    • Depending on the product that you use, it may discolor the area you are gluing. It may also make the area less soft and flexible.
    • Follow the directions that come on the glue you buy when fixing your shirt. Different glues have different drying times and techniques for application, so it's important to follow your product's specific instructions.
  3. 3
    Turn a shirt that is too far gone into a creative project. There may be a point when a shirt has too many holes to make it look presentable or to have it be functional. If your shirt is in tatters or has numerous holes, consider letting it go and turning it into a fun project.
    • If you really love a shirt because of its fabric or because of sentimental reasons, consider using the shirt's fabric to make a quilt or other keepsake item. That way the fabric can continue to be used, just in a different form.
  4. 4
    Have your shirt fixed by a professional if you can't fix it yourself. If your shirt has a large hole or you're worried about ruining it by attempting to fix it yourself, take it to a tailor to have it fixed. A professional tailor will likely be able to fix holes so that they are practically invisible to the eye.
    • When you take your shirt in to be repaired, talk to the person about your expectations and ask them what they think they can do for you. Giving the person sewing your shirt clear instructions and getting a clear understanding of what kind of fixes are possible will help you to manage your expectations for the repair.
    • A business that does tailoring or alteration should be able to help you. If you don't know of one in your area, do an internet search to find businesses near you.
  5. Advertisement

Expert Q&A
Did you know you can get expert answers for this article? Unlock expert answers by supporting wikiHow

  • Question
    What are some different ways I can fix a hole in a shirt?
    Andrea Beaulieu
    Andrea Beaulieu
    Professional Tailor & Fashion Designer
    Andrea Beaulieu is a Professional Tailor, Fashion Designer, and the Owner of MOORE, a Brooklyn, New York based storefront and apparel workshop for gender-neutral, contemporary streetwear as well as custom-tailored products. Andrea has over 20 years in the fashion design and marketing industries and specializes in pattern making, draping, and the construction of garments. She holds a BS in Fashion Design and Merchandising from the University of North Carolina at Greensboro.
    Andrea Beaulieu
    Professional Tailor & Fashion Designer
    Expert Answer

    Support wikiHow by unlocking this expert answer.

    Depending on where the hole is and the kind of fabric the shirt is, you may be able to patch it from the inside, or you might be able to adjust the hole into a seam or a dart. If you have a woven knit, the shirt may be able to be rewoven.
  • Question
    My cat ripped a hole in a knitted jumper. What should I do?
    T. Chinsen
    T. Chinsen
    Top Answerer
    Place tape on the jumper to minimize the size of the hole. Take a needle with thread slightly darker than jumper. Attach to a jumper thread at least 2 strands away from the edge of the hole. Pull the needled thread horizontally across the hole and again attach to at least 2 strands from the edge of the hole. Repeat this vertically. With needled thread attached, weave a strand across the hole following the pattern of the threads. If this is too complicated, ask for help at a craft store that offers knitting classes. The instructor should be able to help.
  • Question
    I recently discovered a hole in my favorite sweatshirt and I want to sew it. How do I make the stitching unnoticeable?
    T. Chinsen
    T. Chinsen
    Top Answerer
    Sweatshirt material is a knit fabric. There are loops that need to have a thread run through each loop to prevent further unravelling. This can be tricky as you need to allow some slack to avoid puckering of the fabric.The edges can then be stitched together or secured with fusible interfacing.
Advertisement

Things You’ll Need

Hand Sewing the Hole

  • Thread
  • Sewing needle
  • Scissors

Patching the Hole

  • Fabric
  • Fusible bonding web
  • Scissors
  • Pen or pencil
  • Ruler
  • Iron

About This Article

Andrea Beaulieu
Co-authored by:
Professional Tailor & Fashion Designer
This article was co-authored by Andrea Beaulieu. Andrea Beaulieu is a Professional Tailor, Fashion Designer, and the Owner of MOORE, a Brooklyn, New York based storefront and apparel workshop for gender-neutral, contemporary streetwear as well as custom-tailored products. Andrea has over 20 years in the fashion design and marketing industries and specializes in pattern making, draping, and the construction of garments. She holds a BS in Fashion Design and Merchandising from the University of North Carolina at Greensboro. This article has been viewed 267,343 times.
16 votes - 64%
Co-authors: 11
Updated: July 28, 2022
Views: 267,343
Article SummaryX

To fix a hole in a shirt, start by getting thread that matches the color of your shirt and threading a needle with it. Then, poke the needle through the inside of the fabric, starting about 0.2 inches from the hole. Pull the thread up through the fabric and then bring the needle down through the hole. Next, bring the needle back up through the fabric on the other side of the hole. Continue alternating stitches between the left and right side of the hole until the hole is pulled together and no longer visible. To learn how to patch a hole in a shirt, scroll down!

Did this summary help you?
Advertisement