X
wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 13 people, some anonymous, worked to edit and improve it over time.
This article has been viewed 21,826 times.
Learn more...
Something that happens quite often with the original Furbys is that you get them and they don't work. This is how you can quick start your Furby!
Steps
Method 1
Method 1 of 2:
Spinning The Motor And Gear
-
1Remove the fur and shell from Furby. You should be able to see the wiring.
-
2Find the motor. To the right of Furby's beak, you will see a silver and red, cylinder shaped mechanism. That's it.Advertisement
-
3Get something small, like a small screwdriver or pen cap.
-
4Spin the motor to the right a good couple dozen times.
-
5Find the gear. It's small and gray, and located to the left side of Furby's beak.
-
6Using your small object, spin this gear to the right for about 10 minutes.
-
7Once you've spun it enough, put batteries in Furby. He should start right up and be ready to play!
Advertisement
Method 2
Method 2 of 2:
Going Above The Beak
-
1Push down the beak. You should be able to see inside.
-
2Get a small flathead screwdriver. A phillips head works fine as well, but a flathead is easier to use.
-
3Insert the screwdriver to the left of the beak and push it down as far as it can go.
-
4Spin your screwdriver to the left. If you are in the right spot, then you should be at the gear mentioned in the previous method.
- To know if you are in the right spot, look at Furby's ears and eyelids. They should move slightly every time you spin the screwdriver.
-
5Once you feel that you have spun it enough, put batteries into Furby. Most likely he will start right up!
Advertisement
Community Q&A
-
QuestionDoes this apply to only the original Furbies? Does this also apply to the 2005 Furby? I have a 2005 Furby that has a loose battery lid that won’t stay down when batteries are installed. Can I fix it?AnotheronebitesthesoilCommunity AnswerYes. They should be quite similar. As for the battery lid, there might be a part missing that would be hard for you to fix yourself. I suggest using clear packing tape.
Advertisement
Warnings
- Make sure to do this without batteries in your Furby. The motor could spark while you spin it, which could burn it out.⧼thumbs_response⧽
Advertisement
About This Article
Advertisement