Whether you're trying to sell your car or just want to get rid of old slogans, there are several easy options for removing bumper stickers. Use a heat source, such as a hair dryer or steamer, to loosen the adhesive, or use an adhesive remover that's designed to help take off stickers. Plastic scraping tools like old credit cards or putty knives are great for helping peel off the sticker once it's ready, leaving you with a clean bumper!

Method 1
Method 1 of 2:

Applying an Adhesive Remover

  1. 1
    Apply white vinegar to the sticker for an at-home fix. You can dip a paper towel in white vinegar and saturate the bumper sticker with it, or you can pour white vinegar in a spray bottle and spray the bumper sticker with the liquid. Make sure the sticker is adequately covered with the vinegar before letting it sit.[1]
    • You can also apply the white vinegar using a paintbrush.
  2. 2
    Spray WD-40 on the bumper sticker to remove the edges easily. After reading the instructions on the can, aim the spray at each of the bumper sticker's edges, spraying the recommended amount. This will loosen up the edges enough to make removing the sticker much easier.[2]
    • Though you can use WD-40 in addition to white vinegar if the vinegar didn't work well, WD-40 is primarily used as an alternative to other adhesive removers.
    Advertisement
  3. 3
    Use an adhesive remover spray for trickier bumper stickers. You can find an adhesive remover spray from your local big box store or hardware store that's specifically designed to help take off pesky adhesives. Read the instructions to find out how much to spray on the bumper sticker, and feel free to use the spray several times if needed.[3]
    • Goo Gone is a popular option for adhesive removers that works well on bumper stickers.
  4. 4
    Let the adhesive remover sit for roughly five minutes. Once the bumper sticker is saturated with your chosen adhesive remover, set a timer for five minutes to allow the remover to seep into the sticker’s adhesive. If you’re using a specific type of adhesive remover, look at the directions to make sure you wait the proper amount of time.[4]
  5. 5
    Peel away the sticker using a plastic putty knife or your fingers. After the adhesive remover works its way into the sticker, start removing the sticker by lifting up a corner and pulling it off slowly. If you find that the sticker isn’t coming up easily, apply more of your chosen adhesive remover and let it sit for a few minutes before trying again.[5]
    • Use an old credit card instead of a plastic putty knife, if desired.
    • Spray specific stuck spots to help loosen them up.
  6. 6
    Wipe away any extra residue using rubbing alcohol. Dampen a microfiber towel or old cloth with rubbing alcohol and gently wipe off any sticky spots left from your sticker removal. The alcohol should take away any residue that's left, leaving you with a clean surface.[6]
  7. Advertisement
Method 2
Method 2 of 2:

Using Heat to Remove Bumper Stickers

  1. 1
    Wipe the bumper sticker with a clean cloth to remove surface dirt. The cloth can be dry or damp depending on how much dirt you're trying to remove and how long it's been there. Removing dirt and grime from the bumper sticker will let the heat source penetrate faster.[7]
    • If you're using a damp rag, dip it in lukewarm water before wringing it out to remove excess water.
  2. 2
    Blow hot air onto the bumper sticker for a quick fix. A hair dryer is the easiest heat tool to use, though you can also use a heat gun. Put the hair dryer on the hottest setting and hold it roughly 6 inches (15 cm) from the bumper sticker, heating up the middle section of the sticker before the edges. Move the hair dryer back and forth instead of keeping it in one place to avoid damaging the surface.[8]
    • Holding the hair dryer too close to the bumper sticker may cause the paint to melt.
    • If you choose to use a heat gun (which is hotter than a hair dryer), hold it roughly 1 foot (0.30 m) away from the sticker for 1-3 seconds until the sticker bubbles slightly.
    • Heat the bumper sticker using a hair dryer for about a minute—if you see the edges of the sticker starting to lift, it’s ready.
  3. 3
    Apply steam to the sticker to loosen the adhesive gently. If you have a clothes steamer, you can steam the bumper sticker for about 30 seconds to a minute. Hold the steamer 6 inches (15 cm) from the sticker to avoid damaging the surface. Move the steamer over each part of the sticker slowly, making sure all the edges are loose.[9]
  4. 4
    Pour boiled water over the sticker if you don’t have a heat tool. Bring water to a boil on a stovetop or in the microwave, and carefully pour it directly over the bumper sticker to loosen the glue. Make sure you pour it over the edges of the bumper sticker as well as the middle to make peeling it off easier.[10]
    • Though it will depend on the size of your bumper sticker, 2–3 cups (470–710 ml) of water should work well.
    • You can also dip a rag in boiled water and hold the rag on the sticker for a few minutes, though it’s important to wear gloves or an oven mitt to ensure you don’t burn yourself.
  5. 5
    Use a credit card or plastic scraper to peel away the sticker. Whether you used a hair dryer, steam, or boiled water to loosen the bumper sticker’s adhesive, the next step is slipping a plastic scraper tool under an edge of the sticker and scraping it off gently. Peel up the sticker slowly to make sure you don’t damage the surface, and apply more heat if necessary.[11]
    • Plastic putty knives work well, and you can get them from any big box, home improvement, or art store.
    • Don’t worry if the sticker rips while you’re peeling it off—just continue using your heat method and slowly scraping from the edges first.
    • Continue using the scraper to peel up the sticker until it’s completely removed.
    • Avoid pulling the bumper sticker directly up as you remove it to avoid damaging the surface.
  6. 6
    Clean off any residue using rubbing alcohol. If the sticker left some stickiness behind, dampen a microfiber towel with rubbing alcohol and wipe the spot with the towel. This should remove all the remnants of the bumper sticker, leaving the surface looking fresh and clean![12]
    • You can also use a detailing spray or other car cleaner instead of rubbing alcohol if desired.
  7. Advertisement

Expert Q&A
Did you know you can get premium answers for this article? Unlock premium answers by supporting wikiHow

  • Question
    How do you take off a bumper sticker that was applied to paint?
    Chad Zani
    Chad Zani
    Auto Detailing Expert
    Chad Zani is the Director of Franchising at Detail Garage, an automotive detailing company with locations around the U.S. and Sweden. Chad is based in the Los Angeles, California area and uses his passion for auto detailing to teach others how to do so as he grows his company nationwide.
    Chad Zani
    Auto Detailing Expert
    Expert Answer

    Support wikiHow by unlocking this expert answer.

    Peel it off slowly and carefully. If it's a newer sticker, it will probably come off in one piece, but if it's an older sticker, it will probably be brittle and come off in pieces. Also, if you scrape it off, be careful, because the paint under the sticker might be compromised.
  • Question
    Are bumper stickers removable?
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer

    Support wikiHow by unlocking this staff-researched answer.

    Some bumper stickers are designed to be relatively easy to remove, although not all “removable” adhesives come off as easily as you might like! If you want a sticker that’s really easy to remove and even put back on, buy or make your own magnetic stickers.
  • Question
    Can you use WD40 to remove bumper stickers?
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer

    Support wikiHow by unlocking this staff-researched answer.

    Yes, WD40 is a great solvent for loosening stubborn stickers. Spray a little around the edges of the sticker to loosen them so that you can start gently peeling the sticker off.
Advertisement

Warnings

  • Only use razor blades on glass surfaces—they can cause damage to paint or metal.
    ⧼thumbs_response⧽
  • Avoid holding a heat source on your bumper sticker for too long, or too closely, as this can cause the paint to melt.
    ⧼thumbs_response⧽
Advertisement

Things You'll Need

  • Clean cloth
  • Hair dryer or heat gun (optional)
  • Steamer (optional)
  • Credit card or plastic scraper
  • Rubbing alcohol
  • WD-40 (optional)
  • White vinegar (optional)
  • Adhesive remover spray (optional)

About This Article

Chad Zani
Co-authored by:
Auto Detailing Expert
This article was co-authored by Chad Zani. Chad Zani is the Director of Franchising at Detail Garage, an automotive detailing company with locations around the U.S. and Sweden. Chad is based in the Los Angeles, California area and uses his passion for auto detailing to teach others how to do so as he grows his company nationwide. This article has been viewed 463,831 times.
2 votes - 50%
Co-authors: 27
Updated: March 13, 2022
Views: 463,831
Categories: Cleaning Cars
Article SummaryX

If you want to remove a bumper sticker from your car, start by holding a hairdryer 6 inches from the sticker and blowing hot air on it for 1 minute. As you blow air onto the sticker, keep the hairdryer moving so the entire sticker heats up evenly and so you don't cause damage by bubbling the paint. Then, peel back a corner of the sticker using your fingernail or a razor blade. As you pull the corner back, continue to apply heat as required. When you've removed the sticker, clean off any remaining adhesive with WD-40. For tips on how to remove a sticker using lubricant, keep reading!

Did this summary help you?
Advertisement