Are you trying to maximize your storage space in your Chrysler Town & Country or Dodge Grand Caravan minivan? In some Chrysler Town and Country and Dodge Grand Caravan minivans, you should be able to stash away these seats until the next time they are needed. You'll find the steps on how to put these seats fully away until needed next in this article. Read on for details.

Steps

  1. 1
    Decide how much room you'll need to complete the task at hand. If you just need a little bit of room, you can fold down the middle seat. If you need more than what just the certain seat gave you on space, you can fold down just the rear seat. If you need even more, you can fold down both.
  2. 2
    Push the front seats up (unless you are doing the back seat).
  3. Advertisement
Method 1
Method 1 of 2:

Middle Seats

  1. 1
    Pull the carpet that is in front of the seat upwards with both of your hands, and place it to the side. It's preferable to place these carpets outside the vehicle when you do so, but after a few times, you'll be able to determine just how much space you'll need to use to be able to find a place to put these. Pulling up the carpeting, will expose the cabinets that will later hold your seats.[1]
  2. 2
    Ensure that both headrests are down. If there is a lever or pull-cord to fold these headrests down, pull it until the headrest have been completely folded down. You may have to push the headrest into it's closing position.
  3. 3
    Pull the lever that folds the middle seat's seat-back into a folded position. The lever is on the side of the seat.[2]
  4. 4
    Take notice of the knob on the floor slightly underneath the seat. It should be just noticeable to the untrained eye.
  5. 5
    Push on the cabinet-door from the back, and hold it back. Doing this will expose an area that is able to accompany the seat.
  6. 6
    Pull backwards on the knob. This should free the seats from their locked and upright position. It will also cause the seat to fall frontwards slightly.[3]
  7. 7
    Push on the back of the seat. The seat should "roll over" onto it's back.
  8. 8
    Release the handle to the cabinet door you should be holding onto now, once the seat has been properly stowed into the basket.
  9. 9
    Repeat this process with the other seat, assuming you need the space to do both seats.Do the same with the other side seat, if you need to.
  10. 10
    Return the carpets to their normal positions over top of the cabinet door.[4]
  11. Advertisement
Method 2
Method 2 of 2:

Rear Seats

  1. 1
    Open the trunk lid using either the key fob's button or the button located inside the vehicle near the dashboard.
  2. 2
    Walk around to the back of the trunk.
  3. 3
    Clear out the trunk, as the seat will stow into this section.
  4. 4
    Look for and pull on cord number 1. There should be one marked with this style number. It may either start to fold the headrest down, or it may fold the remainder of the seat onto the seating portion of the seat. This cord will be hidden and over to the side. Push on the portion of the seat that will begin to fold down when you pull cord number 1.[5]
  5. 5
    Pull on cord number 2. It will either fold the remainder of the seat onto the seating position, or it will allow you to begin to stow the seat away (depending on model year and brand).[6]
  6. 6
    Pull on cord number 3, to slow the rate of speed the rear seats fold down flat at. Release this cord slowly thereafter. Drop cord number 2 and pull on cord number 3 asynchronously, to pull the seat into it's final resting position.
  7. 7
    Repeat these steps to the other section of seats in the rear of the car.
  8. Advertisement

Community Q&A

  • Question
    I accidentally stowed my 12 month old where the seat was supposed to go. How do I get her out?
    Community Answer
    Community Answer
    Contact the police immediately.
  • Question
    How do I raise the third row seat from the stow-and-go position?
    Community Answer
    Community Answer
    Pull up on the seatbelt that is attached to the wide seat. Doing so will raise that one. Then lift up on the narrow seat from underneath, and it will go up, too. Pull tab #2 to release the seat backs to fold back into their upright positions. Then pull the headrests into their upright positions.
  • Question
    What do I do if my seats are down and won't pull up?
    Community Answer
    Community Answer
    Search for a latch, which is a small handle on the side. So if the right seat is down, search for a small latch in the middle of the thin side. If there isn't one, refer to the manual.
Advertisement

Warnings

  • Be careful not to jam your fingers in the mechanical arms of the seats as you stow the seats away.
    ⧼thumbs_response⧽
Advertisement

Things You'll Need

  • Chrysler Town and Country or Dodge (Grand) Caravan (model years 2005 or later)
  • Non-stowed Seat (Middle or Rear row)

About This Article

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 10 people, some anonymous, worked to edit and improve it over time. This article has been viewed 133,976 times.
110 votes - 41%
Co-authors: 10
Updated: January 11, 2022
Views: 133,976
Advertisement