An atom's electron configuration is a numeric representation of its electron orbitals. Electron orbitals are differently-shaped regions around an atom's nucleus where electrons are mathematically likely to be located. An electron configuration can quickly and simply tell a reader how many electron orbitals an atom has as well as the number of electrons populating each of its orbitals. Once you understand the basic principles behind electron configuration, you will be able to write your own configurations and tackle those chemistry tests with confidence.

Method 1
Method 1 of 4:

Review

  1. 1
    What is an electron configuration? An electron configuration shows the distribution of electrons of an atom or a molecule. There is a specific notation that can quickly show you where the electrons are likely to be located, so knowing this notation is an essential part of knowing electron configurations. Reading these notations can tell you what element you’re referring to and how many electrons it has.[1]
    • The structure of the periodic table is based on electron configuration.
    • For example, the notation for Phosphorus (P) is .
  2. 2
    What are electron shells? The area that surrounds the nucleus of an atom, or the area where the electrons orbit, is called an electron shell. There are usually around 3 electron shells per atom, and the arrangement of these shells is called the electron configuration. All electrons in the same shell must have the same energy.[2]
    • Electron shells are also sometimes referred to as energy levels.
    Advertisement
  3. 3
    What is an atomic orbital? As an atom gains electrons, they fill different orbitals sets according to a specific order. Each set of orbitals, when full, contains an even number of electrons. The orbital sets are:[3]
    • The s orbital set (any number in the electron configuration followed by an "s") contains a single orbital, and by Pauli's Exclusion Principle, a single orbital can hold a maximum of 2 electrons, so each s orbital set can hold 2 electrons.
    • The p orbital set contains 3 orbitals, and thus can hold a total of 6 electrons.
    • The d orbital set contains 5 orbitals, so it can hold 10 electrons.
    • The f orbital set contains 7 orbitals, so it can hold 14 electrons.
    • The g, h, i and k orbital sets are theoretical. No known atoms have electrons in any of these orbitals. The g set has 9 orbitals, so it could theoretically contain 18 electrons. The h set would have 11 orbitals and a maximum of 22 electrons, the i set would have 13 orbitals and a maximum of 26 electrons, and the k set would have 15 orbitals and a maximum of 30 electrons.
    • Remember the order of the letters with this mnemonic: Sober Physicists Don't Find Giraffes Hiding In Kitchens.
  4. 4
    What are overlap orbitals? Sometimes, electrons occupy a shared orbital space. Take the Dihydrogen molecule, or H2. The 2 electrons must stay close to each other in order to stay attracted to each other and connect. Since they’re so close, they will occupy the same orbital space, thus sharing the orbital, or overlapping it.[4]
    • In your notation, you’d simply change the row number to 1 less than it actually is. For example, the electron configuration for germanium (Ge) is Even though you go all the way to row 4, there is still a “3d” in the middle there because of overlap.[5]
  5. 5
    How do you use an electron configuration table? If you’re having trouble visualising your notation, it can be useful to use an electron configuration table so you can actually see what you’re writing. Set up a basic table with the energy levels going down the y-axis and the orbital type going across the x-axis. From there, you can draw your notation in the corresponding spaces as they go down the y-axis and across the x-axis. Then, you can follow the line to get your notation.[6]
    • For example, if you were writing out the configuration for beryllium, you’d start up at the 1s, then loop back around to the 2s. Since beryllium only has 4 electrons, you’d stop after that, and get your notion of
  6. Advertisement
Method 2
Method 2 of 4:

Assigning Electrons Using a Periodic Table

  1. 1
    Find your atom's atomic number. Each atom has a specific number of electrons associated with it. Locate your atom's chemical symbol on the periodic table. The atomic number is a positive integer beginning at 1 (for hydrogen) and increasing by 1 for each subsequent atom. The atom's atomic number is the number of protons of the atom—thus, it is also the number of electrons in an atom with 0 charge.[7]
    • Since the periodic table is based on electron configuration, you can use it to determine the element’s configuration notation.
  2. 2
    Determine the charge of the atom. Uncharged atoms will have exactly the number of electrons as is represented on the periodic table. However, charged atoms (ions) will have a higher or lower number of electrons based on the magnitude of their charge. If you're working with a charged atom, add or subtract electrons accordingly: add 1 electron for each negative charge and subtract 1 for each positive charge.[8]
    • For instance, a sodium atom with a +1 charge would have an electron taken away from its basic atomic number of 11. So, the sodium atom would have 10 electrons in total.
    • A sodium atom with a -1 charge would have 1 electron added to its basic atomic number of 11. The sodium atom would then have a total of 12 electrons.
  3. 3
    Understand electron configuration notation. Electron configurations are written so as to clearly display the number of electrons in the atom as well as the number of electrons in each orbital. Each orbital is written in sequence, with the number of electrons in each orbital written in superscript to the right of the orbital name. The final electron configuration is a single string of orbital names and superscripts.[9]
    • For example, here is a simple electron configuration: 1s2 2s2 2p6. This configuration shows that there are 2 electrons in the 1s orbital set, 2 electrons in the 2s orbital set, and 6 electrons in the 2p orbital set. 2 + 2 + 6 = 10 electrons total. This electron configuration is for an uncharged neon atom (neon's atomic number is 10.)
  4. 4
    Memorize the order of the orbitals. Note that orbital sets are numbered by electron shell, but ordered in terms of energy. For instance, a filled 4s2 is lower energy (or less potentially volatile) than a partially-filled or filled 3d10, so the 4s shell is listed first. Once you know the order of orbitals, you can simply fill them according to the number of electrons in the atom. The order for filling orbitals is as follows: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p, 8s.[10]
    • An electron configuration for an atom with every orbital completely filled would be written: 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10 5p6 6s2 4f14 5d10 6p6 7s2 5f14 6d107p6
    • Note that the above list, if all the shells were filled, would be the electron configuration for Og (Oganesson), 118, the highest-numbered atom on the periodic table—so this electron configuration contains every currently known electron shell for a neutrally charged atom.
  5. 5
    Fill in the orbitals according to the number of electrons in your atom. For instance, if we want to write an electron configuration for an uncharged calcium atom, we'll begin by finding its atomic number on the periodic table. Its atomic number is 20, so we'll write a configuration for an atom with 20 electrons according to the order above.[11]
    • Fill up orbitals according to the order above until you reach 20 total electrons. The 1s orbital gets 2 electrons, the 2s gets 2, the 2p gets 6, the 3s gets 2, the 3p gets 6, and the 4s gets 2 (2 + 2 + 6 +2 +6 + 2 = 20.) Thus, the electron configuration for calcium is: 1s2 2s2 2p6 3s2 3p6 4s2.
    • Note: Energy level changes as you go up. For example, when you are about to go up to the 4th energy level, it becomes 4s first, then 3d. After the 4th energy level, you'll move onto the 5th where it follows the order once again (5s, then 4d). This only happens after the 3rd energy level.
  6. 6
    Use the periodic table as a visual shortcut. You may have already noticed that the shape of the periodic table corresponds to the order of orbital sets in electron configurations. For example, atoms in the second column from the left always end in "s2", atoms at the far right of the skinny middle portion always end in "d10," etc. Use the periodic table as a visual guide to write configurations – the order that you add electrons to orbitals corresponds to your position in the table.[12]
    • Specifically, the 2 leftmost columns represent atoms whose electron configurations end in s orbitals, the right block of the table represents atoms whose configurations end in p orbitals, the middle portion, atoms that end in d orbital, and the bottom portion, atoms that end in f orbitals.
    • For example, when writing an electron configuration for Chlorine, think: "This atom is in third row (or "period") of the periodic table. It's also in the fifth column of the periodic table's p orbital block. Thus, its electron configuration will end ...3p5
    • Caution: the d and f orbital regions of the table correspond to energy levels that are different from the period they're located in. For instance, the first row of the d orbital block corresponds to the 3d orbital even though it's in period 4, while the first row of the f orbital corresponds to the 4f orbital even though it's in period 6.
  7. 7
    Learn shorthand for writing long electron configurations. The atoms along the right edge of the periodic table are called noble gases. These elements are very chemically stable. To shorten the process of writing a long electron configuration, simply write the chemical symbol of the nearest chemical gas with fewer electrons than your atom in brackets, then continue with the electron configuration for the following orbital sets.[13]
    • To understand this concept, it's useful to write an example configuration. Let's write a configuration for zinc (atomic number 30) using noble gas shorthand. Zinc's full electron configuration is: 1s2 2s2 2p6 3s2 3p6 4s2 3d10. However, notice that 1s2 2s2 2p6 3s2 3p6 is the configuration for Argon, a noble gas. Just replace this portion of zinc's electron notation with Argon's chemical symbol in brackets ([Ar].)
    • So, zinc's electron configuration written in shorthand is [Ar]4s2 3d10.
    • Note that if you are doing noble gas notation for, say, argon, you cannot write [Ar]! You have to use the noble gas that comes before that element; for argon, that would be neon ([Ne]).
  8. Advertisement
Method 3
Method 3 of 4:

Using an ADOMAH Periodic Table

  1. 1
    Understand the ADOMAH Periodic Table. This method of writing electron configurations doesn't require memorization. However, it does require a rearranged periodic table, because in a traditional periodic table, beginning with 4th row, period numbers do not correspond to the electron shells. Find an ADOMAH Periodic Table, a special type of periodic table designed by scientist Valery Tsimmerman. It's easily found via a quick online search.
    • In the ADOMAH Periodic Table, horizontal rows represent groups of elements, such as halogens, inert gases, alkali metals, alkaline earths, etc. Vertical columns correspond to electron shells and so called “cascades” (diagonal lines connecting s,p,d and f blocks) correspond to periods.
    • Helium is moved next to Hydrogen, since both of them are characterized by the 1s orbital. Blocks of periods (s,p,d and f) are shown on the right side and shell numbers are shown at the base. Elements are presented in rectangular boxes that are numbered from 1 to 120. These numbers are normal atomic numbers that represent total number of electrons in a neutral atom.
  2. 2
    Find your atom in the ADOMAH table. To write electron configuration of an element, locate its symbol in ADOMAH Periodic Table and cross out all elements that have higher atomic numbers. For example, if you need to write electron configuration of Erbium (68), cross out elements 69 through 120.
    • Notice numbers 1 through 8 at the base of the table. These are electron shell numbers, or column numbers. Ignore columns which contain only crossed out elements. For Erbium, remaining columns are 1,2,3,4,5 and 6.
  3. 3
    Count orbital sets up to your atom. Looking at the block symbols shown on the right side of the table (s, p, d, and f) and at the column numbers shown at the base and ignoring diagonal lines between the blocks, break up columns into column-blocks and list them in order from the bottom up. Again, ignore column blocks where all elements are crossed out. Write down the column-blocks beginning with the column number followed by the block symbol, like this: 1s 2s 2p 3s 3p 3d 4s 4p 4d 4f 5s 5p 6s (in case of Erbium).
    • Note: The above electron configuration of Er is written in the order of ascending shell numbers. It could also be written in the order of orbital filling. Just follow cascades from top to bottom instead of columns when you write down the column-blocks: 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10 5p6 6s2 4f12.
  4. 4
    Count electrons for each orbital set. Count elements that were not crossed out in each block-column, assigning 1 electron per element, and write down their quantity next to the block symbols for each block-column, like this: 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 4f12 5s2 5p6 6s2. In our example, this is the electron configuration of Erbium.
  5. 5
    Know irregular electron configurations. There are eighteen common exceptions to electron configurations for atoms in the lowest energy state, also called the ground state. They deviate from the general rule only by last 2 to 3 electron positions. In these cases, the actual electron configuration keeps the electrons in a lower-energy state than in a standard configuration for the atom. The irregular atoms are:
    • Cr (..., 3d5, 4s1); Cu (..., 3d10, 4s1); Nb (..., 4d4, 5s1); Mo (..., 4d5, 5s1); Ru (..., 4d7, 5s1); Rh (..., 4d8, 5s1); Pd (..., 4d10, 5s0); Ag (..., 4d10, 5s1); La (..., 5d1, 6s2); Ce (..., 4f1, 5d1, 6s2); Gd (..., 4f7, 5d1, 6s2); Au (..., 5d10, 6s1); Ac (..., 6d1, 7s2); Th (..., 6d2, 7s2); Pa (..., 5f2, 6d1, 7s2); U (..., 5f3, 6d1, 7s2); Np (..., 5f4, 6d1, 7s2) and Cm (..., 5f7, 6d1, 7s2).
  6. Advertisement
Method 4
Method 4 of 4:

Special Cases and Exceptions

  1. 1
    Notating cations: When you’re dealing with cations, it’s very similar to neutral atoms in a grounded state. Start by removing electrons in the outermost p orbital, then the s orbital, then the d orbital.[14]
    • For example, ground state electronic configuration of calcium (Z=20) is . The calcium ion, however, has 2 less electrons, so you’d start by removing them from the outermost shell (which is 4). So, the configuration for calcium ion is .
  2. 2
    Notating anions: When you notate an anion, you have to use the Aufbau Principle, which states that electrons fill the lowest available energy levels first before moving onto higher ones. So, you’d add electrons to the outermost energy level (or the lowest), before moving inwards to add more.[15]
    • For example, neutral chlorine (Z=17) has 17 electrons and is notated as . The chloride ion, however, has 18 electrons, which you’d add starting at the outermost energy level. Therefore, the chloride ion is notated as .
  3. 3
    Chromium and Copper: As with every rule, there are exceptions. Although most elements follow the Aufbau Principle, these elements do not. Instead of going to the lowest energy state, these electrons are added to the level that will make them the most stable. It may be helpful to memorize the notation for these 2 elements, since they defy the rule.[16]
    • Cr = [Ar]
    • Cu = [Ar]
  4. Advertisement

Community Q&A

  • Question
    In some elements, I have seen beside the electronic configuration, it is written [He], [Ne], etc. What is that supposed to be?
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    It's a shorthand notation for the noble gas that comes before the element. It's basically a way of skipping a step when you write out your notation so you don't have to spend as much time on it.
  • Question
    What is an electron configuration?
    Community Answer
    Community Answer
    An electron configuration is the arrangement of electron of an atom or a molecule in an atomic or molecular orbital.
  • Question
    What is the electron configuration of CH4?
    Community Answer
    Community Answer
    CH4 isn't an atom, but a composite substance. You can only tell the electron configuration of an atom.
Advertisement

About This Article

Bess Ruff, MA
Co-authored by:
Environmental Scientist
This article was co-authored by Bess Ruff, MA and by wikiHow staff writer, Hannah Madden. Bess Ruff is a Geography PhD student at Florida State University. She received her MA in Environmental Science and Management from the University of California, Santa Barbara in 2016. She has conducted survey work for marine spatial planning projects in the Caribbean and provided research support as a graduate fellow for the Sustainable Fisheries Group. This article has been viewed 2,690,314 times.
46 votes - 76%
Co-authors: 128
Updated: February 23, 2023
Views: 2,690,314
Categories: Science Writing | Chemistry
Article SummaryX

If you need to write the electron configurations for atoms of any element, find the atom’s atomic number. If you’re working with a charged atom, add one electron for each negative charge and subtract one for each positive charge. Write the electron configuration to display the number of electrons in the atom, divided into orbital sets. The orbital sets go in a predetermined order and have a set number of electrons per set, so fill in the orbitals according to the number of electrons in your atom. If you want to learn how to find an electron configuration using an ADOMAH periodic table, keep reading!

Did this summary help you?
Advertisement