Ester

The word ester was coined in 1848 by a German chemist Leopold Gmelin,[6] probably as a contraction of the German Essigäther, "acetic ether".

The names of esters that are formed from an alcohol and an acid, are derived from the parent alcohol and the parent acid, where the latter may be organic or inorganic. Esters derived from the simplest carboxylic acids are commonly named according to the more traditional, so-called "trivial names" e.g. as formate, acetate, propionate, and butyrate, as opposed to the IUPAC nomenclature methanoate, ethanoate, propanoate, and butanoate. Esters derived from more complex carboxylic acids are, on the other hand, more frequently named using the systematic IUPAC name, based on the name for the acid followed by the suffix -oate. For example, the ester hexyl octanoate, also known under the trivial name hexyl caprylate, has the formula CH₃(CH₂)₆CO₂(CH₂)₅CH₃.

Butyl acetate, an ester derived from butanol (right side of the picture, blue) and acetic acid (left side of the picture, orange). The acidic hydrogen atom from acetic acid is replaced by a butyl group.

The chemical formulas of organic esters formed from carboxylic acids and alcohols usually take the form RCO₂R' or RCOOR', where R and R' are the organyl parts of the carboxylic acid and the alcohol, respectively, and R can be a hydrogen in the case of esters of formic acid. For example, butyl acetate (systematically butyl ethanoate), derived from butanol and acetic acid (systematically ethanoic acid) would be written CH₃CO₂(CH₂)₃CH₃. Alternative presentations are common including BuOAc and CH₃COO(CH₂)₃CH₃.

Cyclic esters are called lactones, regardless of whether they are derived from an organic or inorganic acid. One example of an organic lactone is γ-valerolactone.

An uncommon class of esters are the orthoesters. One of them are the esters of orthocarboxylic acids. Those esters have the formula RC(OR′)₃, where R stands for any group (organic or inorganic) and R′ stands for organyl group. For example, triethyl orthoformate (HC(OCH₂CH₃)₃) is derived, in terms of its name (but not its synthesis) from esterification of orthoformic acid (HC(OH)₃) with ethanol.

A phosphoric acid ester, where R stands for an organyl group.

Esters can also be derived from inorganic acids.

• Phosphoric acid forms phosphate esters, e.g. triphenyl phosphate (O=P(OC₆H₅)₃) and methyl dihydrogen phosphate (O=P(OCH₃)(OH)₂)
• Sulfuric acid forms sulfate esters, e.g., dimethyl sulfate ((CH₃O)₂SO₂) and methyl bisulfate (CH₃OSO₂OH)
• Nitric acid forms nitrate esters, e.g. methyl nitrate (CH₃−O−NO₂) and nitroglycerin (CH(−O−NO₂)(−CH₂−O−NO₂)₂)
• Boric acid forms borate esters , e.g. trimethyl borate (B(OCH₃)₃)
• Carbonic acid forms carbonate esters, e.g. ethylene carbonate ((CH₂O)₂C=O) (if one classifies carbonic acid as an inorganic compound)
• Trithiocarbonic acid forms trithiocarbonate esters, e.g. dimethyl trithiocarbonate ((CH₃S)₂C=S) (if one classifies trithiocarbonic acid as an inorganic compound)
• Thiocyanic acid forms thiocyanate esters, e.g. methyl thiocyanate (CH₃−S−C≡N) (if one classifies thiocyanic acid as an inorganic compound)

Inorganic acids that exist as tautomers form two or more kinds of esters.

• Phosphorous acid forms two kinds of esters: phosphite esters, e.g. triethyl phosphite (P(OCH₂CH₃)₃), and phosphonate esters, e.g. diethyl phosphonate (HP(=O)(−OCH₂CH₃)₂)
• Thiosulfuric acid forms two kinds of thiosulfate esters, e.g. O,O-dimethyl thiosulfate ((CH₃−O−)₂C=S) and O,S-dimethyl thiosulfate (CH₃−O−C(=O)−S−CH₃)

Some inorganic acids that are unstable or elusive form stable esters.

• Chromic acid,forms di-tert-butyl chromate (((CH₃)₃CO)₂CrO₂)
• Sulfurous acid, which is unstable, forms dimethyl sulfite ((CH₃O)₂S=O)

In principle, all metal and metalloid alkoxides, of which many hundreds are known, could be classified as esters of the hypothetical acids (e.g. aluminium triethoxide (Al(OCH₂CH₃)₃) could be classified as an ester of aluminic acid which is aluminium hydroxide, tetraethyl orthosilicate (Si(OCH₂CH₃)₄) could be classified as an ester of orthosilicic acid, and titanium ethoxide (Ti(OCH₂CH₃)₄) could be classified as an ester of orthotitanic acid).

Esters are generally identified by gas chromatography, taking advantage of their volatility. IR spectra for esters feature an intense sharp band in the range 1730–1750 cm⁻¹ assigned to ν_C=O. This peak changes depending on the functional groups attached to the carbonyl. For example, a benzene ring or double bond in conjugation with the carbonyl will bring the wavenumber down about 30 cm⁻¹.

The classic synthesis is the Fischer esterification, which involves treating a carboxylic acid with an alcohol in the presence of a dehydrating agent:

RCO₂H + R'OH ⇌ RCO₂R' + H₂O

The equilibrium constant for such reactions is about 5 for typical esters, e.g., ethyl acetate.[15] The reaction is slow in the absence of a catalyst. Sulfuric acid is a typical catalyst for this reaction. Many other acids are also used such as polymeric sulfonic acids. Since esterification is highly reversible, the yield of the ester can be improved using Le Chatelier's principle:

• Using the alcohol in large excess (i.e., as a solvent).
• Using a dehydrating agent: sulfuric acid not only catalyzes the reaction but sequesters water (a reaction product). Other drying agents such as molecular sieves are also effective.
• Removal of water by physical means such as distillation as a low-boiling azeotropes with toluene, in conjunction with a Dean-Stark apparatus.

Reagents are known that drive the dehydration of mixtures of alcohols and carboxylic acids. One example is the Steglich esterification, which is a method of forming esters under mild conditions. The method is popular in peptide synthesis, where the substrates are sensitive to harsh conditions like high heat. DCC (dicyclohexylcarbodiimide) is used to activate the carboxylic acid to further reaction. 4-Dimethylaminopyridine (DMAP) is used as an acyl-transfer catalyst.[16]

Another method for the dehydration of mixtures of alcohols and carboxylic acids is the Mitsunobu reaction:

RCO₂H + R'OH + P(C₆H₅)₃ + R₂N₂ → RCO₂R' + OP(C₆H₅)₃ + R₂N₂H₂

Carboxylic acids can be esterified using diazomethane:

RCO₂H + CH₂N₂ → RCO₂CH₃ + N₂

Using this diazomethane, mixtures of carboxylic acids can be converted to their methyl esters in near quantitative yields, e.g., for analysis by gas chromatography. The method is useful in specialized organic synthetic operations but is considered too hazardous and expensive for large-scale applications.

Carboxylic acids are esterified by treatment with epoxides, giving β-hydroxyesters:

RCO₂H + RCHCH₂O → RCO₂CH₂CH(OH)R

This reaction is employed in the production of vinyl ester resin from acrylic acid.

Alcohols react with acyl chlorides and acid anhydrides to give esters:

RCOCl + R'OH → RCO₂R' + HCl

(RCO)₂O + R'OH → RCO₂R' + RCO₂H

The reactions are irreversible simplifying work-up. Since acyl chlorides and acid anhydrides also react with water, anhydrous conditions are preferred. The analogous acylations of amines to give amides are less sensitive because amines are stronger nucleophiles and react more rapidly than does water. This method is employed only for laboratory-scale procedures, as it is expensive.

Although rarely employed for esterifications, carboxylate salts (often generated in situ) react with electrophilic alkylating agents, such as alkyl halides, to give esters.[14][17] Anion availability can inhibit this reaction, which correspondingly benefits from phase transfer catalysts or such highly polar aprotic solvents as DMF. An additional iodide salt may, via the Finkelstein reaction, catalyze the reaction of a recalcitrant alkyl halide. Alternatively, salts of a coordinating metal, such as silver, may improve the reaction rate by easing halide elimination.

Transesterification, which involves changing one ester into another one, is widely practiced:

RCO₂R' + CH₃OH → RCO₂CH₃ + R'OH

Like the hydrolysation, transesterification is catalysed by acids and bases. The reaction is widely used for degrading triglycerides, e.g. in the production of fatty acid esters and alcohols. Poly(ethylene terephthalate) is produced by the transesterification of dimethyl terephthalate and ethylene glycol:[14]

n (C₆H₄)(CO₂CH₃)₂ + 2n C₂H₄(OH)₂ → [(C₆H₄)(CO₂)₂(C₂H₄)]_n + 2n CH₃OH

A subset of transesterification is the alcoholysis of diketene. This reaction affords 2-ketoesters.[14]

(CH₂CO)₂ + ROH → CH₃C(O)CH₂CO₂R

Alkenes undergo "hydroesterification" in the presence of metal carbonyl catalysts. Esters of propanoic acid are produced commercially by this method:

H₂C=CH₂ + ROH + CO → CH₃CH₂CO₂R

A preparation of methyl propionate is one illustrative example.

H₂C=CH₂ + CO + CH₃OH → CH₃CH₂CO₂CH₃

The carbonylation of methanol yields methyl formate, which is the main commercial source of formic acid. The reaction is catalyzed by sodium methoxide:

CH₃OH + CO → HCO₂CH₃

In hydroesterification, alkenes and alkynes insert into the O−H bond of carboxylic acids. Vinyl acetate is produced industrially by the addition of acetic acid to acetylene in the presence of zinc acetate catalysts:[18] Presently, zinc acetate is used as the catalyst:

HC≡CH + CH₃CO₂H → CH₃CO₂CH=CH₂

Vinyl acetate can also be produced by palladium-catalyzed reaction of ethylene, acetic acid, and oxygen:

2 H₂C=CH₂ + 2 CH₃CO₂H + O₂ → 2 CH₃CO₂CH=CH₂ + 2 H₂O

Silicotungstic acid is used to manufacture ethyl acetate by the alkylation of acetic acid by ethylene:

H₂C=CH₂ + CH₃CO₂H → CH₃CO₂CH₂CH₃

The Tishchenko reaction involve disproportionation of an aldehyde in the presence of an anhydrous base to give an ester. Catalysts are aluminium alkoxides or sodium alkoxides. Benzaldehyde reacts with sodium benzyloxide (generated from sodium and benzyl alcohol) to generate benzyl benzoate.[19] The method is used in the production of ethyl acetate from acetaldehyde.[14]

• Favorskii rearrangement of α-haloketones in presence of base
• Baeyer–Villiger oxidation of ketones with peroxides
• Pinner reaction of nitriles with an alcohol
• Nucleophilic abstraction of a metal–acyl complex
• Hydrolysis of orthoesters in aqueous acid
• Cellulolysis via esterification[20]
• Ozonolysis of alkenes using a work up in the presence of hydrochloric acid and various alcohols.[21]
• Anodic oxidation of methyl ketones leading to methyl esters.[22]
• Interesterification exchanges the fatty acid groups of different esters.

Esterification is a reversible reaction. Esters undergo hydrolysis under acidic and basic conditions. Under acidic conditions, the reaction is the reverse reaction of the Fischer esterification. Under basic conditions, hydroxide acts as a nucleophile, while an alkoxide is the leaving group. This reaction, saponification, is the basis of soap making.

The alkoxide group may also be displaced by stronger nucleophiles such as ammonia or primary or secondary amines to give amides: (ammonolysis reaction)

RCO₂R' + NH₂R″ → RCONHR″ + R'OH

This reaction is not usually reversible. Hydrazines and hydroxylamine can be used in place of amines. Esters can be converted to isocyanates through intermediate hydroxamic acids in the Lossen rearrangement.

Sources of carbon nucleophiles, e.g., Grignard reagents and organolithium compounds, add readily to the carbonyl.

Compared to ketones and aldehydes, esters are relatively resistant to reduction. The introduction of catalytic hydrogenation in the early part of the 20th century was a breakthrough; esters of fatty acids are hydrogenated to fatty alcohols.

RCO₂R' + 2 H₂ → RCH₂OH + R'OH

A typical catalyst is copper chromite. Prior to the development of catalytic hydrogenation, esters were reduced on a large scale using the Bouveault–Blanc reduction. This method, which is largely obsolete, uses sodium in the presence of proton sources.

Especially for fine chemical syntheses, lithium aluminium hydride is used to reduce esters to two primary alcohols. The related reagent sodium borohydride is slow in this reaction. DIBAH reduces esters to aldehydes.[23]

Direct reduction to give the corresponding ether is difficult as the intermediate hemiacetal tends to decompose to give an alcohol and an aldehyde (which is rapidly reduced to give a second alcohol). The reaction can be achieved using triethylsilane with a variety of Lewis acids.[24][25]

As for aldehydes, the hydrogen atoms on the carbon adjacent ("α to") the carboxyl group in esters are sufficiently acidic to undergo deprotonation, which in turn leads to a variety of useful reactions. Deprotonation requires relatively strong bases, such as alkoxides. Deprotonation gives a nucleophilic enolate, which can further react, e.g., the Claisen condensation and its intramolecular equivalent, the Dieckmann condensation. This conversion is exploited in the malonic ester synthesis, wherein the diester of malonic acid reacts with an electrophile (e.g., alkyl halide), and is subsequently decarboxylated. Another variation is the Fráter–Seebach alkylation.

• Methyl esters are often susceptible to decarboxylation in the Krapcho decarboxylation.
• Phenyl esters react to hydroxyarylketones in the Fries rearrangement.
• Specific esters are functionalized with an α-hydroxyl group in the Chan rearrangement.
• Esters with β-hydrogen atoms can be converted to alkenes in ester pyrolysis.
• A direct conversion of esters to nitriles.[26]
• Pairs of esters are coupled to give α-hydroxyketones in the acyloin condensation

As a class, esters serve as protecting groups for carboxylic acids. Protecting a carboxylic acid is useful in peptide synthesis, to prevent self-reactions of the bifunctional amino acids. Methyl and ethyl esters are commonly available for many amino acids; the t-butyl ester tends to be more expensive. However, t-butyl esters are particularly useful because, under strongly acidic conditions, the t-butyl esters undergo elimination to give the carboxylic acid and isobutylene, simplifying work-up.