How to Apply a Popsocket

A popsocket grip is an attachment that can be added to the back of your phone. It will allow you to hold your phone comfortably, especially when taking selfies. You can also use it to do things like store your headphones and prop up your phone. Popsocket mounts can be applied to surfaces such as your car dashboard to hold your phone firmly while a popsocket grip is attached to it.

Method 1
Method 1 of 3:

Applying a Grip

  1. Image titled Apply a Popsocket Step 1
    1
    Purchase a popsocket from the brand's official website. You can choose from a range of color and designs. You can also design your own custom popsocket by uploading a unique image while making your order.
  2. Image titled Apply a Popsocket Step 2
    2
    Decide where to attach your popsocket. Decide beforehand where you want it positioned based on how you intend to use it. Place the popsocket on the back of the phone without removing the adhesive covering to see how it will line up. If you want to attach 2 popsockets to the back of your phone, test out their positioning together and make sure they line up evenly.
    • For instance, if you want to prop up a small phone vertically, position the popsocket in the bottom of your phone.
    • You might attach two popsockets to prop up a larger phone, or to store your headphones.
    • Decide if you want to attach the popsocket directly to your phone, or to a phone case.
    Advertisement
  3. Image titled Apply a Popsocket Step 3
    3
    Peel off the sticker on the adhesive surface. When you are ready to attach the popsocket, carefully peel off the sticker on the back. Pull the sticker gently to avoid ripping it, starting at one corner and gently lifting it up. Do not remove the adhesive covering before you are ready to apply the popsocket to your phone.[1]
  4. Image titled Apply a Popsocket Step 4
    4
    Stick the popsocket to your phone. Once the adhesive surface is exposed, press it onto the spot where you want the popsocket to be. Press down firmly for 10-15 seconds to make sure it sticks to the phone.[2]
    5. Advertisement
Method 2
Method 2 of 3:

Repositioning the Grip

  1. Image titled Apply a Popsocket Step 5
    1
    Flatten the popsocket before removing it. Press down your popsocket to flatten it against the back of your phone. It will be easier to remove it in this compressed form. Do not try to remove the popsocket while it is extended, which may result in it popping out of its base.
  2. Image titled Apply a Popsocket Step 6
    2
    Gently peel up the popsocket from one corner. Choose one corner of the popsocket and gently start peeling it up. Gently continue pulling in a circular direction, pulling up the outer surface. Once the entire radius of the circle is unstuck, pull up the popsocket to remove it.
  3. Image titled Apply a Popsocket Step 7
    3
    Use dental floss to remove the popsocket if you can't pull it off. If the adhesive is too strong to remove the popsocket by hand, slide dental floss under it to unglue it. Wrap the ends of a long piece of dental floss around your index fingers and position it at one edge of the popsocket. Gently but firmly pull the floss between the popsocket and phone, breaking the seal.
  4. Image titled Apply a Popsocket Step 8
    4
    Rinse and dry your popsocket if the adhesive part is dirty. Make sure that the adhesive part of your popsocket is clean so that it will re-stick properly. Gently rinse it under cold water and let it sit for 10 minutes to dry. Be sure to attach it to another surface within 15 minutes or the adhesive will dry out.
  5. Image titled Apply a Popsocket Step 9
    5
    Stick the popsocket to a new surface area. Choose a new spot for your popsocket, on the same phone or on a new one. Press the popsocket down firmly to let he adhesive part stick to the phone. Continue putting pressure on it for 10-15 seconds to ensure that it adheres properly.
    6. Advertisement
Method 3
Method 3 of 3:

Installing a Mount

  1. Image titled Apply a Popsocket Step 10
    1
    Buy a popsocket mount from the company's website. Mounts can be found in the "accessories" section. Popsocket mounts can be applied to surfaces such as your car dashboard or bedroom mirror.
    • Purchase a popsocket mount at https://www.popsockets.com/.
    • You can also purchase a popsocket mount designed to attach to your car's air vent.
  2. Image titled Apply a Popsocket Step 11
    2
    Wipe down the adhesion surface with rubbing alcohol. Ensure that the popsocket mount has a clean surface to adhere to so that it sticks properly. Apply a few drops of rubbing alcohol to a cotton ball or use a sanitizing alcohol wipe to clean the area you will be attaching the mount. The surface should be dry after a few seconds.
  3. Image titled Apply a Popsocket Step 12
    3
    Peel back the covering over the adhesive on the back of the mount. Gently remove the protective sheet covering the adhesive on your popsocket mount. Be sure to avoid touching the adhesive. The 3M VHB pad is designed for a strong hold and will be very difficult to remove from your skin if contact occurs.
  4. Image titled Apply a Popsocket Step 13
    4
    Press the mount to the adhesion surface and let it bond for 8 hours. Press the adhesive part of the mount down onto the surface you are sticking it to. Press firmly on the mount for 10-15 seconds. Let the mount bond to the surface for 8 hours before you use it to ensure that it is attached firmly.
    • A popsocket mount can only be applied once, so be careful about positioning it properly before attaching it.
    5. Advertisement

Community Q&A

  • Question
    I already have a metal plate between my iPhone and case. Now I want a Popsocket that has a magnetic base so I can attach it to my case. Does anyone make such an item?
    Community Answer
    Community Answer
    Yes, i have bought a similar item which can meet your need. It is a replacement kit that includes stickers for the Popsocket end and metal plates attached on the Popsocket base for magnetic use. Search keyword "B07F7ZMSR5" on Amazon.
  • Question
    Can I put a Popsocket on my phone case?
    Community Answer
    Community Answer
    Yes, that is where you are supposed to put it.
  • Question
    Can I attach a popsocket to an Otterbox rubbery outshell?
    Community Answer
    Community Answer
    Yes. Did that with mine and it hasn't fallen off. It's also easy to reposition with Otterbox cases.
Advertisement

You Might Also Like

4 Easy Ways to Keep a Clear Case from Turning Yellow
Remove a Popsocket
How to
Remove a Popsocket
Clean a Silicone Phone Case
How to
Clean a Silicone Phone Case
How to Apply a Screen Protector
How to
Clean a Phone Case
Drain the Battery on Your Phone
How to
Drain the Battery on Your Phone
How to Make a Homemade Phone Stand in Less than a Minute
Test a Battery Charger
How to
Test a Battery Charger
Connect Airpods Without a Case
How to
Connect Airpods Without a Case
Shrink a Silicone Phone Case
How to
Shrink a Silicone Phone Case
Revive a Cell Phone Battery3 Ways to Revive a Cell Phone Battery
Make a Cell Phone Case
How to
Make a Cell Phone Case
Clean a USB C Charging Port
How to
Clean a USB C Charging Port
Dispose of a Swollen Cell Phone Battery
How to
Dispose of a Swollen Cell Phone Battery
Advertisement

References

  1. ↑ https://youtu.be/K4_eZKophJY?t=82?
  2. ↑ https://www.youtube.com/watch?v=K4_eZKophJY&feature=youtu.be&t=83

About This Article

wikiHow Staff
Co-authored by:
wikiHow Staff
wikiHow Staff Writer
This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. This article has been viewed 223,583 times.
How helpful is this?
Co-authors: 8
Updated: March 7, 2023
Views: 223,583
Categories: Phone Accessories
Article SummaryX

To apply a popsocket grip, first place it on the back of your phone without removing the adhesive so you can test what it feels like in different positions. Once you’ve found the position you want, remove the sticker and press the adhesive surface onto your chosen spot. If you want to reposition your popsocket, press it down onto your phone to make it easier to remove. Then, gently peel it up from a corner. Alternatively, use dental floss if you can’t peel it off. After you’ve removed it, wash the adhesive surface under cold water to remove any dirt. Let it sit for 10 minutes before sticking it to your chosen spot. For tips on how to apply a popsocket mount, read on!

Did this summary help you?
Advertisement