How to Fill a Syringe

Medical professionals all over the world know how to fill a syringe, but the skill is increasingly becoming one that patients and their families need to know as well. Many people prefer to give themselves, or family members, injections at home rather than receive them in a clinical setting. Learning the proper technique to fill a syringe from a qualified medical professional and paying close attention to safety measures can help allow you to take care of your medical condition in the privacy of your home.

Part 1
Part 1 of 4:

Preparing to Fill the Syringe

  1. Image titled Fill a Syringe Step 1
    1
    Gather your supplies. You will need the medication vial, syringe-needle unit, alcohol pads, a cotton ball, a band-aid, and a sharps container.[1]
    • The alcohol pad is used to wipe the rubber top of the medication container once you remove the outer seal. You may also need to clean the area of the skin where the injection will be administered.
    • The bandage and cotton ball are used to cover the area of the skin where you injected the medication to reduce bleeding.
    • The sharps container is the thick plastic bin that holds the used supplies, including the syringes and needles. When you use a lancet, syringe, or needle, these items are called sharps. Proper storage of used sharps is a safety measure. When the containers are full, they can be transferred to a place that destroys biohazard equipment.[2]
    • Each state and/or city may have their own protocol for disposing biohazard material/sharps disposal sites. Contact local health department for specific instructions on how to dispose of hazardous materials.
  2. Image titled Fill a Syringe Step 2
    2
    Read the literature provided. If the injection you are giving is something other than insulin, the product literature that comes with the medication provides precise instructions on preparing the drug for administration. However, this literature should be considered a refresher and not the sole source of information — it is very important that a qualified medical professional trains you on preparation and how to administer the medication. If you have not received this training, you should not try to give someone an injection.
    • Not all medications are packaged the same way. Some medications need to be reconstituted with water before administration, while others may require using only the syringe and needle that comes with the product. Be thoroughly familiar with the steps you need to take that are specific to the medication.
    • Most injections given at home, other than insulin, will be done using a single dose vial. The label will say either single dose vial, or will contain the abbreviation, SDV.
    • This means that that only one dose can be given from that vial, regardless of the amount remaining after you have withdrawn the amount of medication you need.
    • In some cases, you may be administering a medication that is packaged in a vial called a multi-dose-vial. The package label will have the words multi-dose vial or the abbreviation MDV. Insulin vials are considered a multi-dose vial.[3] However, this is rare for medication intended for home use.
    • If you are using a multi-dose vial, write the date, using a marker that will not wipe off, when the container is first opened.
    • This type of product usually contains small amounts of preservatives, but still should not be used at all once 30 days after the first date of opening has passed, unless your doctor advises you differently. Keep these products in the refrigerator, but not frozen, between uses.
    Advertisement
  3. Image titled Fill a Syringe Step 3
    3
    Always examine the medication. In order to maintain your safety, check the medication vial for several elements:[4]
    • Be sure you have the right medicine, and it is the right strength.[5]
    • Be sure the expiration date has not passed.[6]
    • Be sure the product has been stored according to the manufacturer’s guidelines. For example, some products can be stored at room temperature, while others may need refrigeration.
    • Check the integrity of the packaging. Make sure there are no cracks or dents in the vial that holds the medication.
    • Look for particulate matter. This means you must examine the medication in the vial to be sure nothing unusual is floating inside the container.
    • Examine the seal. Make sure there are no cracks or dents in the seal around the top of the vial.
    4. Advertisement
Part 2
Part 2 of 4:

Filling the Syringe

  1. Image titled Fill a Syringe Step 4
    1
    Check the syringe and needle. Be sure the syringe and needle have not deteriorated or been damaged.
    • Visible cracks in the barrel, or discoloration of any part of the syringe, including the rubber top on the plunger, indicates the syringe should not be used.
    • Examine the needle for damage. Check the needle to be sure it is not broken or bent. Do not use any product that appears to have been damaged.
    • While some packaged syringes have a visible expiration date, many do not. If you are not sure, contact the manufacturer. Have any lot numbers available when you call.
    • Discard damaged or deteriorated syringes safely in a sharps container.
  2. Image titled Fill a Syringe Step 5
    2
    Verify that you have the correct type of syringe. Do not interchange syringe types. Using the wrong type of syringe can easily result in giving the wrong amount of medication.[7]
    • Insulin syringes are intended for insulin administration only. The markings along the barrel are in units, and are specific for insulin dosing.
    • Your syringe should be able to hold a little more than the required amount for the dose. The needle should be the correct length for the type of injection you are going to administer.
    • Your doctor or pharmacist should have trained you on proper administration of the drug, including the type of syringe and needle recommended. You can use the product literature as a reference as well, but only once you have received adequate training.
    • If you have any questions, talk to your doctor or pharmacist. They can help you to be sure you have the correct syringe-needle unit for the medication you are giving.
  3. Image titled Fill a Syringe Step 6
    3
    Practice with the safety features of the syringe. Safety syringes have a patented way to safely recap the needle once the medication has been drawn up. Practice this method prior to drawing up the actual dose of medication. This helps you to be prepared to re-cap the needle in situations where you do not give the prepared dose immediately.[8]
    • Discard the practice syringe safely in a sharps container.
    • It is generally not recommended to re-cap syringes, as this can result in accidental needle sticks.
  4. Image titled Fill a Syringe Step 7
    4
    Wash your hands. Thoroughly clean your hands using soap and water. Include washing your nail area, and between your fingers.[9]
  5. Image titled Fill a Syringe Step 8
    5
    Know if you need to gently mix the medication. Some medication, like insulin that appears cloudy, need to be gently mixed before drawing it up. Roll the medication between your hands gently. Do not shake it, as this will create bubbles. The product literature will advise you on products that should be gently mixed.[10]
  6. Image titled Fill a Syringe Step 9
    6
    Remove the cap from the vial. Wipe the rubber seal with an alcohol pad. Allow the alcohol to air-dry. Do not fan it with your hand or blow on it. Doing this may contaminate the cleaned area.[11]
  7. Image titled Fill a Syringe Step 10
    7
    Pull the plunger back on the syringe. Your target is the line, or mark on the barrel, that is equal to the amount of medication you need to draw up.[12]
  8. Image titled Fill a Syringe Step 11
    8
    Remove the needle cover. Use caution not to touch the needle.
  9. Image titled Fill a Syringe Step 12
    9
    Insert the syringe needle into the rubber center. Use a straight motion as you push the needle into the top of the medicine bottle.[13]
  10. Image titled Fill a Syringe Step 13
    10
    Push the plunger of the syringe down. This forces the air from the syringe into the bottle. You are inserting the amount of air that equals the amount of medication you will be removing.[14]
  11. Image titled Fill a Syringe Step 14
    11
    Turn the bottle upside-down. Do this carefully so as not to dislodge the needle from the bottle. Hold the neck of the bottle between your thumb and index finger of your non-dominant hand. Support the syringe with your other hand. Do not allow the needle to bend.[15]
  12. Image titled Fill a Syringe Step 15
    12
    Pull the plunger back. Use your dominant hand to pull the plunger back to the line marked on the barrel of the syringe indicating the prescribed amount of medication. Do not remove the needle from the medication vial yet.[16]
  13. Image titled Fill a Syringe Step 16
    13
    Inspect the medication in the syringe for air bubbles. Gently tap the barrel of the syringe. This will move any air bubbles trapped in the medication toward the needle.[17]
  14. Image titled Fill a Syringe Step 17
    14
    Push the plunger gently. Once the air bubbles are at the top of the syringe, push the plunger until the air bubbles are removed. A small amount of medication may squirt out as you remove the air bubbles.[18]
  15. Image titled Fill a Syringe Step 18
    15
    Draw more medication if needed. Once you have removed the air bubbles, check the amount of medication remaining in the syringe to be sure you have the exact dose you need.
  16. Image titled Fill a Syringe Step 19
    16
    Remove the needle from the vial. Avoid touching the needle once you have drawn the medication into the syringe. If you do not plan to give the injection immediately, then place a safety cover, as practiced, back on the needle.[19]
    • If you do not have a safety re-cap feature, carefully use the needle to scoop up the original needle covering. Then you can secure it in place with your fingers.[20]
  17. Image titled Fill a Syringe Step 20
    17
    Give the injection. Injection techniques vary depending on the type of injection being given.
  18. Image titled Fill a Syringe Step 21
    18
    Use safe injection practices. According to the World Health Organization, there are 4 areas of focus in giving injections safely.[21] Those 4 areas include:
    • Avoid giving unnecessary injections.
    • Always use sterile equipment, including the needles.
    • Avoid contaminating the injection as it is prepared.
    • Properly dispose of the used syringes and needles.[22]
  19. Image titled Fill a Syringe Step 22
    19
    Never re-use a needle. Once the injection has been given, discard of the needle in a sharps container.[23]
    • A needle that has pierced the skin of someone is not only dulled, but contaminated with possibly serious and contagious diseases.
    20. Advertisement
Part 3
Part 3 of 4:

Discarding Items Used in a Safe Manner

  1. Image titled Fill a Syringe Step 23
    1
    Get a sharps container. Sharps containers are designed to be a safe way to dispose of syringes and needles. Sharps containers are available for purchase at your local pharmacy, or online.[24]
    • Never put syringes or needles in the regular trash.[25]
    • If you do not have access to a sharps container, then you can use a container made from very thick plastic that has a tight-fitting lid, such as an empty laundry detergent container. Label the container with the words "Sharps Biohazard" and take it to a sharps disposal location when it is full.[26]
  2. Image titled Fill a Syringe Step 24
    2
    Review your state’s guidelines. Many states have specific recommendations and programs that can help you develop a regular system for disposing of biohazardous waste. Sharps, including used needles and syringes, are considered to be biohazardous waste since they came in direct contact with someone's skin or blood.[27]
  3. Image titled Fill a Syringe Step 25
    3
    Work with a mailbox kit. Some companies offer to supply you with the appropriate sizes of sharps containers, and agree to set up an arrangement for you to safely mail those containers back to them when they are full. The company will dispose of the biohazard materials appropriately, according to EPA, FDA, and state requirements.[28]
  4. Image titled Fill a Syringe Step 26
    4
    Ask your pharmacy about the unused medications. Some states have specific guidelines regarding the disposal of unused medications.
    • In many cases, you may able to place the opened vials of medication directly into the sharps containers. Your pharmacy, physician, mailback company, or state agency, can advise you on the proper disposal of unused medication.[29]
    5. Advertisement
Part 4
Part 4 of 4:

Understanding the Basics

  1. Image titled Fill a Syringe Step 27
    1
    Explore the available types of syringes. Syringes are categorized by how their parts work and how they are designed to function.
  2. Image titled Fill a Syringe Step 28
    2
    Recognize a luer-lok syringe. Common syringes most recently used in clinical practice are called luer-lok syringes. Luer-lok describes the type of locking mechanism built into the tip of the syringe. The mechanism works by securely holding luer-lok needles once they are twisted in place.
    • Using this type of syringe requires an added step in assembly. The added step is to secure the needle to the syringe, prior to drawing up the medication.
  3. Image titled Fill a Syringe Step 29
    3
    Identify syringes designed for a specific function. Examples of syringe types that are designed for a certain purpose or function include an insulin syringe, tuberculin syringe, and safety syringe.
    • Insulin syringes are intended only for giving insulin. The barrel is graduated in units instead of mls.
    • Tuberculin syringes are used when you need to give a very small dose of a medication, such as 0.5mls.[30]
  4. Image titled Fill a Syringe Step 30
    4
    Know what makes a safety syringe different. A safety syringe is an all-in-one unit. That means that the syringe has a pre-attached needle, so the added step of attaching the needle by hand is not needed.
    • A safety syringe also has a built-in mechanism that either covers, or retracts, the needle once the medication has been administered to the patient.
    • Due to the increasing number of healthcare accidents involving needle sticks, regulatory agencies are mandating the use of safety syringes in healthcare facilities. Safety syringes are recommended by health organizations including the CDC and the World Health Organization.[31]
  5. Image titled Fill a Syringe Step 31
    5
    Identify the parts of a syringe. A syringe is made of 3 basic parts. Those parts include the barrel, the plunger, and the tip.
  6. Image titled Fill a Syringe Step 32
    6
    Know what the barrel does. The barrel is the clear part in the middle that holds the medication. The barrel is marked with numbers and lines in a graduated manner. These help to guide you as you fill the syringe. The inside of the barrel is considered to be a sterile environment.
    • The numbers indicate the amount of medication you are putting in the syringe in mls, or ccs. The abbreviation “mls” stands for milliliters. The abbreviation “ccs” stands for cubic centimeters.
    • ONE ml is the same as ONE cc.
    • The numbers and lines on an insulin syringe indicate the units of insulin being drawn into the syringe. Insulin syringes usually have a graduated measurement in mls also, but this is in smaller or lighter type. The focus of an insulin syringe is to provide clarity regarding the number of insulin units being drawn up.
  7. Image titled Fill a Syringe Step 33
    7
    Recognize the plunger. The plunger is the part of the syringe that you manipulate as you fill the syringe. The end of the plunger extends out from the bottom of the syringe, and gently glides inside the barrel. This action helps you to accurately draw up the correct amount of medication.
    • The rubber tip of the plunger that slides inside the barrel is considered sterile. The lower part of the plunger extends from the bottom of the syringe. This is the also the part you push to deliver the medication when you give the injection.
  8. Image titled Fill a Syringe Step 34
    8
    Know about the syringe tip. The tip of the syringe is where the needle is attached. For reasons of safety and convenience, safety syringes, or all-in-one syringes, are available with the needle already attached.
    • Using a luer-lok syringe requires attaching the needle. This type of syringe, and the separate needle, have grooves that allow for the needle to be securely attached to the tip of the syringe with a simple twisting motion.
  9. Image titled Fill a Syringe Step 35
    9
    Identify the parts of the needle. The needle attaches to the tip of the syringe and has 3 parts. Those parts include the hub, shaft, and bevel.
    • The hub is the part closest to the barrel where the needle connects to the syringe.
    • The shaft is the longest part of the needle.
    • The bevel is the very tip of the needle that comes in direct contact with the skin of the person receiving the injection. Needles are designed to have a slight slant, or bevel, on the very tip.
  10. Image titled Fill a Syringe Step 36
    10
    Choose the proper syringe-needle unit. Many drugs that must be administered by injection are now being packaged by the manufacturers in kits that contain everything you would need, including the syringe and needle.
    • If you need to purchase the syringe-needle combo unit separately from the medication, try to find safety syringes that will work for the medication and delivery site needed.
    • Syringes can be purchased separately from needles, but for safety reasons this is not recommended. Even hospitals are being mandated to use safety syringe-needle combo units to avoid complications that include a greater risk of infections for the patients and needle stick injuries that may occur to the staff.
  11. Image titled Fill a Syringe Step 37
    11
    Know what the numbers on the package mean. In order to select the correct syringe, it is important that you understand what you need to properly fill the syringe and give the injection. An all-in-one syringe needle unit will have 3 distinct numbers on the package labeling.
    • One of the numbers indicates the size of the syringe barrel, such as 3cc. A second number will give the length of the needle, such as 1 inch. The third number indicates the gauge of the needle, such as 23g.
    • Always select a syringe that holds more than you need to inject. If your medication requires that you inject 2cc, same as 2mls, for each dose, then you will want to choose a syringe that is larger, say a 3cc, or 3ml, syringe.
    • The needle length is specific to the place where the medication needs to be delivered. Something that needs to just go under the skin would require a shorter needle, such as ½ to ¾ inch. If you need to get the medication delivered into a muscle, you will need to select a longer needle size.
    • The size of the person receiving the injection is also something to consider. Obese people may need a longer needle to reach a muscle than people with less body fat.
    • The gauge of the needle tells you how fat the needle is. It is actually a measure of the diameter of the hole inside the needle. Some medications are thicker and need a fatter needle to properly pass the medication through it and into the skin. Other medications can be given using a skinnier needle.
    • The numbers that tell you the gauge of the needle are backwards. The larger numbers indicate the smaller actual diameter of the needle.
    • Using an 18 gauge needle would allow for a thicker medication to pass through easily, but it also might hurt a little more. A 23 gauge needle has a smaller diameter for the medication to pass through.
    • Try to select the smallest thickness, or diameter, of the needle, meaning a higher number, that will work with the medication you need to inject. Remember, the larger the number, the smaller the thickness or diameter.
  12. Image titled Fill a Syringe Step 38
    12
    Learn about the types of injections. Syringes hold medications that are intended to be given by injection. Injections can be given by 3 primary routes.[32]
    • Subcutaneous injections are a common type of injection administered at home. Insulin is administered in a subcutaneous manner.
    • IM, or intramuscular injections, are more complicated than giving a subcutaneous injection. This is the type of injection that requires getting the medication delivered into muscle tissue.
    • The final route is called intravenous. This is not a common route of administration, unless someone has an indwelling venous catheter, or they are in a hospital setting. IV medication should never be administered at home unless through a port-a-cath and patient's have been trained sufficiently. This is very dangerous and if done incorrectly, can introduce bacteria into blood stream, thus causing systemic deadly infection.
    13. Advertisement

Warnings

  • Always put safety first. If you are not sure if you accidentally touched the needle while filling the syringe, or notice something in the medication vial after you have drawn up the accurate dose, waste that round and start again.
    ⧼thumbs_response⧽
  • Again, you should not be administering any injections unless you have received thorough training from a qualified heath care professional. Simply reading the product literature, reading a how-to, or watching a video online is not enough.
    ⧼thumbs_response⧽
  • If the plunger comes all the way out of the syringe, then discard that syringe. Once the inside of the barrel part of the syringe has been exposed to room air, it is no longer a sterile environment.
    ⧼thumbs_response⧽
Advertisement

You Might Also Like

Read Syringes
How to
Read Syringes
Give a B12 InjectionAdministering B12 Injections Safely at Home: A Complete Guide
Inject Into a VeinHow to Inject Yourself: 13 Ways to Stay Safe and Sterile
Reduce Pain After an Injection
How to
Reduce Pain After an Injection
Avoid Bruises from Injections
How to
Avoid Bruises from Injections
Give a Prolia Injection
How to
Give a Prolia Injection
Give an Intramuscular Injection
How to
Give an Intramuscular Injection
Perform a Self Injection to the Abdomen
How to
Perform a Self Injection to the Abdomen
Give a Subcutaneous Injection
How to
Give a Subcutaneous Injection
Give an Injection
How to
Give an Injection
Give a Shot
How to
Give a Shot
Give a Newborn an IM Injection
How to
Give a Newborn an IM Injection
Self Inject a Humira Pen
How to
Self Inject a Humira Pen
Give a Heparin Shot
How to
Give a Heparin Shot
Advertisement

References

  1. ↑ http://www.nlm.nih.gov/medlineplus/ency/patientinstructions/000530.htm
  2. ↑ https://www.fda.gov/medical-devices/safely-using-sharps-needles-and-syringes-home-work-and-travel/best-way-get-rid-used-needles-and-other-sharps
  3. ↑ http://www.bd.com/resource.aspx?IDX=3866
  4. ↑ http://www.nlm.nih.gov/medlineplus/ency/patientinstructions/000530.htm
  5. ↑ http://www.bd.com/resource.aspx?IDX=3866
  6. ↑ https://www.cdc.gov/injectionsafety/providers/provider_faqs_multivials.html
  7. ↑ http://www.bd.com/resource.aspx?IDX=3866
  8. ↑ https://essr.umd.edu/sites/default/files/2021-11/NeedleRecappingFactSheet.pdf
  9. ↑ https://www.who.int/occupational_health/activities/1bestprac.pdf
  1. ↑ http://www.bd.com/resource.aspx?IDX=3866
  2. ↑ http://www.nlm.nih.gov/medlineplus/ency/patientinstructions/000530.htm
  3. ↑ https://www.stjude.org/treatment/patient-resources/caregiver-resources/patient-family-education-sheets/home-care-guidelines/withdrawing-medicine-from-a-vial.html
  4. ↑ https://www.stjude.org/treatment/patient-resources/caregiver-resources/patient-family-education-sheets/home-care-guidelines/withdrawing-medicine-from-a-vial.html
  5. ↑ https://www.stjude.org/treatment/patient-resources/caregiver-resources/patient-family-education-sheets/home-care-guidelines/withdrawing-medicine-from-a-vial.html
  6. ↑ https://www.stjude.org/treatment/patient-resources/caregiver-resources/patient-family-education-sheets/home-care-guidelines/withdrawing-medicine-from-a-vial.html
  7. ↑ https://www.stjude.org/treatment/patient-resources/caregiver-resources/patient-family-education-sheets/home-care-guidelines/withdrawing-medicine-from-a-vial.html
  8. ↑ http://www.nlm.nih.gov/medlineplus/ency/patientinstructions/000530.htm
  9. ↑ http://www.nlm.nih.gov/medlineplus/ency/patientinstructions/000530.htm
  10. ↑ http://www.nlm.nih.gov/medlineplus/ency/patientinstructions/000530.htm
  11. ↑ http://www.nlm.nih.gov/medlineplus/ency/patientinstructions/000530.htm
  12. ↑ https://www.cdc.gov/oralhealth/infectioncontrol/faqs/safe-injection-practices.html
  13. ↑ http://www.who.int/occupational_health/activities/1bestprac.pdf
  14. ↑ https://www.cdc.gov/injectionsafety/patients/syringereuse_faqs.html
  15. ↑ https://www.fda.gov/medical-devices/safely-using-sharps-needles-and-syringes-home-work-and-travel/sharps-disposal-containers
  16. ↑ https://www.fda.gov/medical-devices/safely-using-sharps-needles-and-syringes-home-work-and-travel/dos-and-donts-proper-sharps-disposal
  17. ↑ https://www.fda.gov/downloads/MedicalDevices/ProductsandMedicalProcedures/HomeHealthandConsumer/ConsumerProducts/Sharps/UCM382038.pdf
  18. ↑ http://www.fda.gov/MedicalDevices/ProductsandMedicalProcedures/HomeHealthandConsumer/ConsumerProducts/Sharps/
  19. ↑ https://www.recyclespot.org/Recycle-More/Prescription-Drugs.aspx
  20. ↑ http://www.fda.gov/MedicalDevices/ProductsandMedicalProcedures/HomeHealthandConsumer/ConsumerProducts/Sharps/
  21. ↑ http://health.prenhall.com/olsen/pdf/Olsen_ch7.pdf
  22. ↑ http://www.cdc.gov/injectionsafety/IP07_standardPrecaution.html
  23. ↑ https://www.drugs.com/article/injection-types-sites.html

About This Article

Luba Lee, FNP-BC, MS
Medically reviewed by:
Luba Lee, FNP-BC, MS
Board-Certified Family Nurse Practitioner
This article was medically reviewed by Luba Lee, FNP-BC, MS. Luba Lee, FNP-BC is a Board-Certified Family Nurse Practitioner (FNP) and educator in Tennessee with over a decade of clinical experience. Luba has certifications in Pediatric Advanced Life Support (PALS), Emergency Medicine, Advanced Cardiac Life Support (ACLS), Team Building, and Critical Care Nursing. She received her Master of Science in Nursing (MSN) from the University of Tennessee in 2006. This article has been viewed 280,699 times.
27 votes - 97%
Co-authors: 18
Updated: December 14, 2021
Views: 280,699
Categories: Injections

Medical Disclaimer

The content of this article is not intended to be a substitute for professional medical advice, examination, diagnosis, or treatment. You should always contact your doctor or other qualified healthcare professional before starting, changing, or stopping any kind of health treatment.

Article SummaryX

To fill a syringe, first pull the plunger back to your desired measurement. Then, insert the needle into the top of your medicine bottle and depress the plunger to expel air from the syringe. Next, carefully turn the bottle upside-down and pull the plunger back to your chosen measurement. Once you've done that, tap the barrel of the syringe to shift any air bubbles toward the needle. Finally, if there are any bubbles in the syringe, push the plunger gently to remove them. For more tips from our Medical co-author, including how to follow health and safety precautions when using syringes, read on!

Did this summary help you?
Advertisement