How to Fix a Main Gasket With Liquid Glass

This is supposed to be a temporary fix but I know someone who followed this five years ago and his car still doesn’t leak water.

Steps

  1. Image titled Fix a Main Gasket With Liquid Glass Step 1
    1
    Purchase Sodium Silicate (Liquid Glass) from a pharmacy.[1] Purchase new thermostat and associated thermostat gasket(s).
  2. Image titled Fix a Main Gasket With Liquid Glass Step 2
    2
    Drain coolant system by disconnecting the large hose from the bottom of the radiator. Also disconnect the large hose from the top of the radiator.[2]
    Advertisement
  3. Image titled Fix a Main Gasket With Liquid Glass Step 3
    3
    Remove the thermostat and reconnect the hose without a thermostat.[3]
  4. Image titled Fix a Main Gasket With Liquid Glass Step 4
    4
    Flush the coolant system thoroughly with hose water to remove trace amounts of antifreeze. Run water through the large hose which was disconnected from the top of the radiator and leads to the engine. Watch the water coming out of the large hose which was disconnected from the bottom of the radiator until it turns clear. Do the same to the radiator by running water through the top and watching it pour out the bottom.[4]
  5. Image titled Fix a Main Gasket With Liquid Glass Step 5
    5
    Reconnect all the coolant system hoses and the old thermostat gasket without the thermostat.
  6. Image titled Fix a Main Gasket With Liquid Glass Step 6
    6
    In a container, pour about a quart of water. Add the liquid glass and mix thoroughly.[5]
  7. Image titled Fix a Main Gasket With Liquid Glass Step 7
    7
    Add the liquid glass/water mixture to the radiator. Top off the coolant system with hose water. Cap the radiator.
  8. Image titled Fix a Main Gasket With Liquid Glass Step 8
    8
    Start the car and then remove the radiator cap. Wait until the water level drops in the radiator and top it off again with hose water.
  9. Image titled Fix a Main Gasket With Liquid Glass Step 9
    9
    Run for 45 minutes. When liquid glass heats up it is activated. When it cools down by contacting air it will harden as when it seeps out of the leaky gasket.
  10. Image titled Fix a Main Gasket With Liquid Glass Step 10
    10
    After 45 minutes, stop the engine. Wait about 15 minutes and drain the coolant system without burning yourself.
  11. Image titled Fix a Main Gasket With Liquid Glass Step 11
    11
    Flush the coolant system with hose water thoroughly (see step 4). Install the new thermostat with gasket.[6] Ensure the coolant system is put together properly.[7]
  12. Image titled Fix a Main Gasket With Liquid Glass Step 12
    12
    Fill the radiator with 50:50 water:antifreeze.[8]
    13. Advertisement

Community Q&A

  • Question
    Will my car start after I put in liquid glass?
    Community Answer
    Community Answer
    If the reason your car wouldn't start was a leaky gasket, this should help. Keep in mind it is a temporary fix which only lasts up to six months.
  • Question
    Can I put liquid glass in an engine?
    Community Answer
    Community Answer
    No - it will kill your engine. Only use it in the cooling system.
  • Question
    How much liquid gas is needed?
    Community Answer
    Community Answer
    Fill the radiator halfway with water -- use 1/2 cup if the vehicle runs hot while driving more than an hour. If vehicle runs hot quickly, use one cup. Remember to run the vehicle for about an hour afterwards -- if it doesn't get hot, you're good. If it runs hot after you use the sodium silicate, repeat the process. If the cylinder head is cracked, it may not work.
Advertisement

You Might Also Like

Fix a Radiator
How to
Fix a Radiator
Clean an Oxygen Sensor
How to
Clean an Oxygen Sensor
Tell if Engine Is Damaged from No Oil
How to
Tell if Engine Is Damaged from No Oil
Clean a Catalytic Converter
How to
Clean a Catalytic Converter
Set the 34Pict/3 Carburetor on an Aircooled Volkswagen (Vw) Beetle
How to
Set the 34Pict/3 Carburetor on an Aircooled Volkswagen (Vw) Beetle
Do a Compression Test
How to
Do a Compression Test
Flush a Heater Core
How to
Flush a Heater Core
Clean Your EGR Valve
How to
Clean Your EGR Valve
Install a Head Gasket
How to
Install a Head Gasket
How to
Change Spark Plugs in a Car
Fix a Head Gasket With Engine Block Sealer
How to
Fix a Head Gasket With Engine Block Sealer
Test Glow Plugs
How to
Test Glow Plugs
Gap a Spark Plug
How to
Gap a Spark Plug
Diagnose a Loss of Spark in Your Car Engine
How to
Diagnose a Loss of Spark in Your Car Engine
Advertisement

References

  1. ↑ https://homesteady.com/12245107/how-to-plug-a-leak-with-sodium-silicate
  2. ↑ https://www.popularmechanics.com/cars/how-to/a78/1272246/
  3. ↑ https://www.howacarworks.com/cooling-systems/how-to-replace-a-car-thermostat
  4. ↑ https://www.youtube.com/watch?v=mxm3E5SkHrI
  5. ↑ https://homesteady.com/12245107/how-to-plug-a-leak-with-sodium-silicate
  6. ↑ https://www.dummies.com/home-garden/car-repair/heating-cooling-system/how-to-replace-your-vehicles-thermostat/
  7. ↑ https://www.youtube.com/watch?v=NehZEoOZrn4
  8. ↑ https://www.familyhandyman.com/automotive/car-maintenance/how-to-change-coolant/

About This Article

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 10 people, some anonymous, worked to edit and improve it over time. This article has been viewed 123,032 times.
7 votes - 100%
Co-authors: 10
Updated: July 18, 2022
Views: 123,032
Categories: Engine Parts
Advertisement