How to Use a Needle Threader

Co-authored by Mia Danilowicz

Last Updated: September 15, 2021 References

If you’re over it with the frustration of attempting to thread a needle the old-fashioned way, try using a needle threader tool. Just insert the wire loop through the eye of the needle, then slip your thread through the larger threader hole and double it over. When you slide the needle off the loop, it will catch the thread effortlessly, and you can knot it and get right to stitching without a lot of unnecessary squinting and poking.

Part 1

Part 1 of 2:

Loading the Thread

1
Hold the threader in one hand and the needle in the other. For most people, it will probably be easiest to have the needle threader in your dominant hand. If you're right-handed, for instance, you'll hold the tool in your right hand, while left-handed sewers will use their left. You’ll have much more coordination that way, which will allow you to focus on manipulating the small items you’ll be working with.^{[1]
X
Research source}
- Make sure you’re gripping the needle so that the eye is pointing upwards.
- Those with unsteady hands may find it helpful to stabilize the needle using a pincushion or piece of cork. The larger object will hold the needle in place while you're threading so that you won't have to.^{[2]
  X
  Research source}
2
Insert the wire threader loop through the eye of the needle. It may take a few attempts to get the two pieces lined up correctly. Push the threader until the needle rests in the shallow groove next to the base. This will keep it from accidentally slipping out.^{[3]
X
Expert Source

Mia Danilowicz
Master Tailor
Expert Interview. 8 January 2021.}
- If you’re having trouble getting the threader loop through, turn the needle slightly so you can see the opening a little better.
- You may need to push the threader gently to force it through the eye of a smaller-sized needle.
Advertisement
3
Guide the end of the thread through the threader loop. The wire threader loop will give you a much larger target to aim at. Once you’ve got the thread inside, pull the loose end to continue feeding it through.^{[4]
X
Expert Source

Mia Danilowicz
Master Tailor
Expert Interview. 8 January 2021.}
- Needle threaders take the imprecision out of threading by working in reverse. Instead of guiding the thread straight through, the threader allows you to anchor it in place, then pull the needle around it.
4
Double the thread over on itself. Pull the loose end back on itself so that it runs alongside the length of the thread. Gather up both ends between the thumb and forefinger of your free hand. Be sure to create enough length to keep a secure grip on the folded thread.^{[5]
X
Research source}
- You’ll load the threader the same way whether you want to work with single or double thread.

Part 2

Part 2 of 2:

Threading the Needle

1
Slide the needle over the thread. Pull the needle out of the groove at the base of the wire loop and fit it over the double thread. Continue moving it along until it clears the folded end. At the same time, pinch the ends of the thread together tightly.^{[6]
X
Research source}
- At this point, it may help to set the threader down on the tabletop or your lap so you can get a better grip on the needle.
- Be careful not to let the needle slip back off the thread.
2
Pull the loose end of the thread free. Give the thread a gentle tug to work it out of the wire loop the same way it went in. Work the loose end out with your fingers if needed. The thread should now be running straight through the eye of the needle.^{[7]
X
Research source}
- Once you’ve successfully threaded the needle, unwind the spool to make the thread as long as you need it.
3
Knot the thread around the eye of the needle. If you’re content with using single thread, simply tie off the loose end. You can then begin sewing as usual. That’s all there is to it!
- Tie off the knot two to three times to make sure it’s secure enough to hold.
- When you’re done, snip the thread off the spool. This will get the excess material out of the way while you’re stitching.
4
Leave the thread folded for stronger stitches. If you’d prefer to work with double thread, keep pulling the loose end back on itself to add more length. You can then tie the thread off when you’re finished making your stitches.^{[8]
X
Research source}
- Using twice the amount of thread creates a more durable seam, which is good for reinforcing items like torn clothing, buttons, pillows, and stuffed animals that see a lot of hard wear.^{[9]
  X
  Research source}
- Doubling up your thread is particularly useful when you're working with thread that's thin or old.
5
Keep practicing until you get the hang of it. Needle threaders are handy little devices, but they can take a little while to get used to. Don’t worry if your first couple of attempts feel a little awkward. After a few passes, you’ll be threading like a pro!
- By using a needle threader, even crafters who know their way around a needle and thread can cut down dramatically on overall project time.

Expert Q&A
Did you know you can get expert answers for this article? Unlock expert answers by supporting wikiHow

Question

What is a needle threader?

Mia Danilowicz
Master Tailor
Mia Danilowicz is a Master Tailor who works onset and on the red carpet in Los Angeles, California. With over a decade of experience, Mia specializes in bridal and gown couturier fittings, garment reconstruction, and custom design. Mia has worked at the Oscars, Grammys, SAG Awards, and Golden Globes. Her clients include a long list of entertainment and fashion industry headliners, major fashion magazines, luxury consumer brands, and popular media. Mia was trained at the Fashion Institute of Design and Merchandising and received her AA in Fashion Design and BS in Business Management.

Mia Danilowicz

Master Tailor

Expert Answer

Support wikiHow by unlocking this expert answer.

A needle threader is a small metal device that has a wider, wire-like opening, and it's used to help you thread a needle.
Question

Why would you use a needle threader?

Mia Danilowicz
Master Tailor
Mia Danilowicz is a Master Tailor who works onset and on the red carpet in Los Angeles, California. With over a decade of experience, Mia specializes in bridal and gown couturier fittings, garment reconstruction, and custom design. Mia has worked at the Oscars, Grammys, SAG Awards, and Golden Globes. Her clients include a long list of entertainment and fashion industry headliners, major fashion magazines, luxury consumer brands, and popular media. Mia was trained at the Fashion Institute of Design and Merchandising and received her AA in Fashion Design and BS in Business Management.

Mia Danilowicz

Master Tailor

Expert Answer

Support wikiHow by unlocking this expert answer.

A needle threader is helpful if your thread is on the thicker side, if it keeps unraveling, or you have poor vision or hand/eye coordination.
Question

How does a needle threader work?

Mia Danilowicz
Master Tailor
Mia Danilowicz is a Master Tailor who works onset and on the red carpet in Los Angeles, California. With over a decade of experience, Mia specializes in bridal and gown couturier fittings, garment reconstruction, and custom design. Mia has worked at the Oscars, Grammys, SAG Awards, and Golden Globes. Her clients include a long list of entertainment and fashion industry headliners, major fashion magazines, luxury consumer brands, and popular media. Mia was trained at the Fashion Institute of Design and Merchandising and received her AA in Fashion Design and BS in Business Management.

Mia Danilowicz

Master Tailor

Expert Answer

Support wikiHow by unlocking this expert answer.

Insert the needle threader into the eye of the needle, put the end of your thread through, and gently pull it through the eye of the needle, leaving only the thread looped through.