Plutonium hexafluoride

Plutonium hexafluoride is the highest fluoride of plutonium, and is of interest for laser enrichment of plutonium, in particular for the production of pure plutonium-239 from irradiated uranium. This pure plutonium is needed to avoid premature ignition of low-mass nuclear weapon designs by neutrons produced by spontaneous fission of plutonium-240.

Plutonium hexafluoride[1]
Stereo structural formula of plutonium hexafluoride
Names
IUPAC name
plutonium(VI) fluoride
Identifiers
3D model (JSmol)
ChemSpider
  • InChI=1S/6FH.Pu/h6*1H;/q;;;;;;+6/p-6 ☒N
    Key: OJSBUHMRXCPOJV-UHFFFAOYSA-H checkY
  • F[Pu](F)(F)(F)(F)F
Properties
PuF
6
Appearance Dark red, opaque crystals
Density 5.08 g·cm−3
Melting point 52 °C (126 °F; 325 K)
Boiling point 62 °C (144 °F; 335 K)
Structure
Orthorhombic, oP28
Pnma, No. 62
octahedral (Oh)
0 D
Related compounds
Related fluoroplutoniums
Plutonium trifluoride

Plutonium tetrafluoride

Hazards
GHS labelling:
GHS03: OxidizingGHS05: CorrosiveGHS06: ToxicGHS09: Environmental hazard
Danger
NFPA 704 (fire diamond)
NFPA 704 four-colored diamond
4
0
4
Special hazard RA: Radioactive. E.g. plutonium
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)
Infobox references

Preparation

Plutonium hexafluoride is prepared by fluorination of plutonium tetrafluoride (PuF4) by powerful fluorinating agents such as elemental fluorine.[2][3][4][5]

PuF
4
+ F
2
PuF
6

This reaction is endothermic. The product forms relatively quickly at temperatures of 750 °C, and high yields may be obtained by quickly condensing the product and removing it from equilibrium.[5]

It can also be obtained by fluorination of plutonium(III) fluoride, plutonium(IV) oxide, or plutonium(IV) oxalate at approximately 700 °C:[4][6]

2 PuF
3
 + 3 F
2
 → 2 PuF
6
PuO
2
 + 3 F
2
 PuF
6
 + O
2
Pu(C2O4)2 + 3 F
2
 PuF
6
 + 4 CO
2

Alternatively, plutonium(IV) fluoride oxidizes in an 800-°C oxygen atmosphere to plutonium hexafluoride and plutonium(IV) oxide:[7]

3 PuF
4
 + O
2
 → 2 PuF
6
 + PuO
2

In 1984, the synthesis of plutonium hexafluoride at near–room-temperatures was achieved through the use of dioxygen difluoride.[8][9] Hydrogen fluoride is not sufficient[10]:42 even though it is a powerful fluorinating agent. Room temperature syntheses are also possible by using krypton difluoride[11] or irradiation with UV light.[12]

Properties

Physical properties

Phase diagram

Plutonium hexafluoride is a red-brown volatile solid,[1][4] crystallizing in the orthorhombic crystal system with space group Pnma and lattice parameters a = 995 pm, b = 902 pm, and c = 526 pm.[13] It sublimes around 60 °C with heat 12.1 kcal/mol to a gas of octahedral molecules[2] with plutonium-fluorine bond lengths of 197.1 pm.[14] At high pressure, the gas condenses, with a triple point at 51.58 °C and 710 hPa (530 Torr); the heat of vaporization is 7.4 kcal/mol.[13] At temperatures below -180 °C, plutonium hexafluoride is colorless.[4]

Plutonium hexafluoride is paramagnetic, with molar magnetic susceptibility 0.173 mm3/mol.[15]

Spectroscopic properties

Plutonium hexafluoride admits six different oscillation modes: stretching modes v1, v2, and v3 and rotational modes v4, v5, and v6.[16][17] The PuF
6
Raman spectrum cannot be observed, because irradiation at 564.1 nm induces photochemical decomposition.[18] Irradation at 532 nm induces fluorescence at 1900 nm and 4800 nm; irradiation at 1064 nm induces fluorescence about 2300 nm.[19][20]

Absorption modes for PuF
6
[21]
Oscillation ν1 ν2 ν3 ν4 ν5 ν6
Symbol A1g Eg F1u F1u F2g F2u
Wavelength (cm−1) 628 523 615 203 211 171
IR active? + +
Raman active? + + +

Chemical properties

Plutonium hexafluoride is relatively hard to handle, being very corrosive, poisonous, and prone to auto-radiolysis.[22][23][24]

Reactions with other compounds

PuF6 is stable in dry air, but reacts vigorously with water, including atmospheric moisture, to form plutonium(VI) oxyfluoride and hydrofluoric acid.[3][25]

PuF
6
+ 2 H
2
O
PuO
2
F
2
+ 4 HF

It can be stored for a long time in a quartz or pyrex ampoule, provided there are no traces of moisture, the glass has been thoroughly outgassed, and any traces of hydrogen fluoride have been removed from the compound.[26]

An important reaction involving PuF6 is the reduction to plutonium dioxide. Carbon monoxide generated from an oxygen-methane flame can perform the reduction.[27]

Decomposition reactions

Plutonium hexafluoride typically decomposes to plutonium tetrafluoride and fluorine gas. Thermal decomposition does not occur at room temperature,[28][29] but proceeds very quickly at 280 °C.[5][26] In the absence of any external cause for decomposition, the alpha-particle current from plutonium decay will generate auto-radiolysis, at a rate of 1.5%/day (half-time 1.5 months) in solid phase.[5][23][30] Storage in gas phase at pressures 50100 torr (70130 mbar) appears to minimize auto-radiolysis, and long-term recombination with freed fluorine does occur.[31]

Likewise, the compound is photosensitive, decomposing (possibly to plutonium pentafluoride and fluorine) under laser irradiation at a wavelength of less than 520 nm.[32]

Exposure to laser radiation at 564.1 nm or gamma rays will also induce rapid dissolution.[18][24]

Uses

Plutonium hexafluoride plays a role in the enrichment of plutonium, in particular for the isolation of the fissile isotope 239Pu from irradiated uranium. For use in nuclear weaponry, the 241Pu present must be removed for two reasons:

  • It generates enough neutrons by spontaneous fission to cause an uncontrollable reaction.
  • It undergoes beta decay to form 241Am, leading to the accumulation of americium over long periods of storage which must be removed.

The separation between plutonium and the americium contained proceeds through reaction with dioxygen difluoride. Aged PuF4 is fluorinated at room temperature to gaseous PuF6, which is separated and reduced back to PuF4, whereas any AmF4 present does not undergo the same conversion. The product thus contains very little amounts of americium, which becomes concentrated in the unreacted solid.[33]

Separation of the hexafluorides of uranium and plutonium is also important in the reprocessing of nuclear waste.[34][35][36] From a molten salt mixture containing both elements, uranium can largely be removed by fluorination to UF6, which is stable at higher temperatures, with only small amounts of plutonium escaping as PuF6.[10]

History

Shortly after plutonium's discovery and isolation in 1940, chemists began to postulate the existence of plutonium hexafluoride. Early experiments, which sought to mimic methods for the construction of uranium hexafluoride, had conflicting results; and definitive proof only appeared in 1942.[37] The Second World War then interrupted the publication of further research.[22]

Initial experiments, undertaken with extremely small quantities of plutonium, showed that a volatile plutonium compound would developed in a stream of fluorine gas only at temperatures exceeding 700 °C. Subsequent experiments showed that plutonium on a copper plate volatilized in a 500-°C fluorine stream, and that the reaction rate decreased with atomic number in the series uranium > neptunium > plutonium.[38] Brown and Hill, using milligram-scale samples of plutonium, completed in 1942 a distillation experiment with uranium hexafluoride, suggesting that higher fluorides of plutonium ought be unstable, and decompose to plutonium tetrafluoride at room temperature. Nevertheless, the vapor pressure of the compound appeared to correspond to that of uranium hexafluoride.[39] Davidson, Katz, and Orlemann showed in 1943 that plutonium in a nickel vessel volatilized under a fluorine atmosphere, and that the reaction product precipitated on a platinum surface.[40]

Fisher, Vaslow, and Tevebaugh conjectured that the higher fluorides exhibited a positive enthalpy of formation, that their formation would be endothermic, and consequently only stabilized at high temperatures.[41]

In 1944, Alan E. Florin prepared a volatile compound of plutonium believed to be the elusive plutonium hexafluoride, but the product decomposed prior to identification. The fluid substance would collect onto cooled glass and liquify, but then the fluoride atoms would react with the glass.[42]

By comparison between uranium and plutonium compounds, Brewer, Bromley, Gilles, and Lofgren computed the thermodynamic characteristics of plutonium hexafluoride.[43]

In 1950, Florin's efforts finally yielded the synthesis,[3][44] and improved thermodynamic data and a new apparatus for its production soon followed.[2] Around the same time, British workers also developed a method for the production of PuF6.[4][7]

References

  1. Lide, David R. (2009). Handbook of Chemistry and Physics (90 ed.). Boca Raton, Florida: CRC Press. pp. 4–81. ISBN 978-1-4200-9084-0. (webelements.com)
  2. Florin, Alan E.; Tannenbaum, Irving R.; Lemons, Joe F. (1956). "Preparation and properties of plutonium hexafluoride and identification of plutonium(VI) oxyfluoride". Journal of Inorganic and Nuclear Chemistry. 2 (5–6): 368–379. doi:10.1016/0022-1902(56)80091-2. Originally published as
  3. Florin, Alan E. (9 November 1950). Plutonium Hexafluoride: Second Report on the Preparation and Properties (PDF) (Technical report). Los Alamos Scientific Laboratory. LAMS-1168.
  4. Mandleberg, C.J.; Rae, H.K.; Hurst, R.; Long, G.; Davies, D.; Francis, K.E. (1956). "Plutonium hexafluoride". Journal of Inorganic and Nuclear Chemistry. 2 (5–6): 358–367. doi:10.1016/0022-1902(56)80090-0. Originally published as
    • Mandleberg, C. J.; Rae, H. K.; Hurst, R.; Long, G.; Davis, D.; Francis, K. E. (April 1953). Plutonium Hexafluoride: Preparation and Some Physical Properties (Technical report). Vol. I. Atomic Energy Research Establishment. C/R-1172.
    • Hurst, R.; Mandleberg, C. J.; Rae, H. K.; Davis, D.; Francis, K. E. (January 1953). Plutonium Hexafluoride: Preparation and Some Physical Properties (Technical report). Vol. II. Atomic Energy Research Establishment. C/R-1312.
  5. Weinstock, Bernard; Malm, John G. (July 1956). "The properties of plutonium hexafluoride". Journal of Inorganic and Nuclear Chemistry. 2 (5–6): 380–394. doi:10.1016/0022-1902(56)80092-4.
  6. Dawson, J. K.; Truswell, A. E. (22 February 1951). The Preparation of Plutonium Trifluoride and Tetrafluoride by the Use of Hydrogen Fluoride (Technical report). Atomic Energy Research Establishment. C/R-662.
  7. Mandleberg, C. J.; et al. (1952). (Technical report). Atomic Energy Research Establishment. C/R-157. {{cite tech report}}: Missing or empty |title= (help)
  8. Malm, J. G.; Eller, P. G.; Asprey, L. B. (1984). "Low temperature synthesis of plutonium hexafluoride using dioxygen difluoride". Journal of the American Chemical Society. 106 (9): 2726–2727. doi:10.1021/ja00321a056.
  9. Erilov, P. E.; Titov, V. V.; Serik, V. F.; Sokolov, V. B. (2002). "Low-Temperature Synthesis of Plutonium Hexafluoride". Atomic Energy. 92 (1): 57–63. doi:10.1023/A:1015106730457. S2CID 96612181.
  10. Evaluation of the U.S. Department of Energy's Alternatives for the Removal and Disposition of Molten Salt Reactor Experiment Fluoride Salts. Washington, DC: National Academies Press. 1997. doi:10.17226/5538. ISBN 978-0-309-05684-7 via NAP.edu.
  11. Asprey, L. B.; Eller, P. G.; Kinkead, Scott A. (1986). "Formation of actinide hexafluorides at ambient temperatures with krypton difluoride". Inorganic Chemistry. 25 (5): 670–672. doi:10.1021/ic00225a016. ISSN 0020-1669.
  12. Trevorrow, L.E.; Gerding, T.J.; Steindler, M.J. (1969). "Ultraviolet-activated synthesis of plutonium hexafluoride at room temperature". Inorganic and Nuclear Chemistry Letters. 5 (10): 837–839. doi:10.1016/0020-1650(69)80068-1.
  13. Gmelins Handbuch der anorganischen Chemie [Gmelin's Handbook of Inorganic Chemistry]. 71 (Transurane [Transuranics]) (in German). Vol. C. pp. 108–114.
  14. Kimura, Masao; Schomaker, Verner; Smith, Darwin W.; Weinstock, Bernard (May 1968). "Electron‐Diffraction Investigation of the Hexafluorides of Tungsten, Osmium, Iridium, Uranium, Neptunium, and Plutonium". The Journal of Chemical Physics. 48 (9): 4001–4012. Bibcode:1968JChPh..48.4001K. doi:10.1063/1.1669727. ISSN 0021-9606.
  15. Gruen, D. M.; Malm, J. G.; Weinstock, B. (April 1956). "Magnetic Susceptibility of Plutonium Hexafluoride". The Journal of Chemical Physics. 24 (4): 905–906. Bibcode:1956JChPh..24..905G. doi:10.1063/1.1742635. ISSN 0021-9606.
  16. Steindler, Martin J.; Gunther, William H. (August 1964). "The absorption spectrum of plutonium hexafluoride". Spectrochimica Acta. 20 (8): 1319–1322. Bibcode:1964AcSpe..20.1319S. doi:10.1016/0371-1951(64)80159-4.
  17. Walters, R.T.; Briesmeister, R.A. (January 1984). "Absorption spectrum of plutonium hexafluoride in the 3000–9000 Å spectral region". Spectrochimica Acta Part A: Molecular Spectroscopy. 40 (7): 587–589. Bibcode:1984AcSpA..40..587W. doi:10.1016/0584-8539(84)80108-7.
  18. Hawkins, N. J.; Mattraw, H. C.; Sabol, W. W. (24 May 1954). Infrared Spectrum and Thermodynamic Properties of PuF6 (Technical report). Knolls Atomic Power Laboratory. KAPL-1007.
  19. Beitz, James V.; Williams, Clayton W.; Carnall, W. T. (March 1982). "Fluorescence studies of neptunium and plutonium hexafluoride vapors". The Journal of Chemical Physics. 76 (5): 2756–2757. Bibcode:1982JChPh..76.2756B. doi:10.1063/1.443223. ISSN 0021-9606.
  20. Beitz, James V.; Williams, Clayton W.; Carnall, W. T. (19 May 1983). "11. Plutonium Hexafluoride Gas Photophysics and Photochemistry". In Carnall, William T.; Choppin, Gregory R. (eds.). Plutonium Chemistry. ACS Symposium Series. Vol. 216. Washington, D.C.: American Chemical Society. pp. 155–172. doi:10.1021/bk-1983-0216.ch011. ISBN 978-0-8412-0772-1.
  21. Steindler, Martin J. (1 August 1963). Laboratory Investigations in Support of Fluid-bed Fluoride Volatility Processes (Technical report). Vol. II: The Properties of Plutonium Hexafluoride. Argonne National Laboratory. doi:10.2172/4170539. ANL-6753.
  22. Bibler, Ned E. (23 August 1979). "α and β Radiolysis of Plutonium Hexafluoride Vapor". J. Phys. Chem. 83 (17): 2179–2186. doi:10.1021/j100480a001.
  23. Steindler, M.J.; Steidl, D.V.; Fischer, J. (November 1964). "The decomposition of plutonium hexafluoride by gamma radiation". Journal of Inorganic and Nuclear Chemistry. 26 (11): 1869–1878. doi:10.1016/0022-1902(64)80011-7.
  24. Kessie, R. W. (1967). "Plutonium and Uranium Hexafluoride Hydrolysis Kinetics". Industrial & Engineering Chemistry Process Design and Development. 6 (1): 105–111. doi:10.1021/i260021a018. ISSN 0196-4305.
  25. Malm, John G.; Weinstock, Bernard; Weaver, E. Eugene (1958). "The Preparation and Properties of NpF5; a Comparison with PuF5". The Journal of Physical Chemistry. 62 (12): 1506–1508. doi:10.1021/j150570a009. ISSN 0022-3654.
  26. Pokidyshev, A. M.; Tsarenko, I. A.; Serik, V. F.; Sokolov, V. B. (October 2003). "Reduction of Plutonium Hexafluoride Using Gaseous Reagents". Atomic Energy. 95 (4): 701–708. doi:10.1023/B:ATEN.0000010988.94533.24. ISSN 1063-4258. S2CID 93145477.
  27. Trevorrow, L. E.; Shinn, W. A.; Steunenberg, R. K. (March 1961). "The Thermal Decomposition of Plutonium Hexafluoride". The Journal of Physical Chemistry. 65 (3): 398–403. doi:10.1021/j100821a003. ISSN 0022-3654.
  28. Fischer, J.; Trevorrow, L.; Shinn, W. (October 1961). "The Kinetics and Mechanism of the Thermal Decomposition of Plutonium Hexafluoride". The Journal of Physical Chemistry. 65 (10): 1843–1846. doi:10.1021/j100827a036. ISSN 0022-3654.
    • Steindler 1963
    • Wagner, R. P.; Shinn, W. A.; Fischer, J.; Steindler, Martin J. (1 May 1963). Laboratory Investigations in Support of Fluid-bed Fluoride Volatility Processes (Technical report). Vol. VII: The Decomposition of Gaseous Plutonium Hexafluoride by Alpha Radiation. Argonne National Laboratory. doi:10.2172/4628896. ANL-7013.
  29. Morse, L. R. (2005), "PuF6 gas pressure in aged cylinders" (personal communiction to D. L. Clark), Los Alamos, NM.
  30. US 4670239, Sherman W. Rabideau & George M. Campbell, "Photochemical Preparation of Plutonium Pentafluoride", published June 2, 1987, assigned to The United States of America, but see also Lobikov, E. A.; Prusakov, V. N.; Serik, V. F. (August–September 1992). "Plutonium Hexafluoride Decomposition under the Action of Laser Radiation". Journal of Fluorine Chemistry. 58 (2–3): 277. doi:10.1016/S0022-1139(00)80734-4, in which the decay product is identified as tetrafluoride instead.
  31. Mills, T.R.; Reese, L.W. (1994). "Separation of plutonium and americium by low-temperature fluorination". Journal of Alloys and Compounds. 213–214: 360–362. doi:10.1016/0925-8388(94)90931-8.
    • US 3708568A, Gilliher, W.; Harris, R. & Ledoux, R., "Removal of Plutonium from Plutonium Hexafluoride-Uranium Hexafluoride Mixtures", published 1973-01-02, assigned to Atomic Energy Commission
    • US 4172114A, Mitsuhiro Nishimura et al, "Method for purifying plutonium hexafluoride", published 1979-10-23, assigned to Japan Atomic Energy Research Institute
  32. Moser, W.Scott; Navratil, James D. (1984). "Review of major plutonium pyrochemical technology". Journal of the Less Common Metals. 100: 171–187. doi:10.1016/0022-5088(84)90062-6. OSTI 6168468.
  33. Drobyshevskii, Yu. V.; Ezhov, V. K.; Lobikov, E. A.; Prusakov, V. N.; Serik, V. F.; Sokolov, V. B. (2002). "Application of Physical Methods for Reducing Plutonium Hexafluoride". Atomic Energy. 93 (1): 578–588. doi:10.1023/A:1020840716387. S2CID 100100314.
  34. Seaborg, G. T. (1942). (Technical report). University of Chicago Metallurgical Laboratory. CN-125. {{cite tech report}}: Missing or empty |title= (help)
  35. Brown, H. S.; Hill, O. F.; Jaffay, A. H. (1942). (Technical report). University of Chicago Metallurgical Laboratory. CN-343. {{cite tech report}}: Missing or empty |title= (help)
  36. Brown, H. S.; Hill, O. F. (12 November 1942). (Technical report). University of Chicago Metallurgical Laboratory. CN-363. {{cite tech report}}: Missing or empty |title= (help)
  37. Davidson, N. R.; Katz, J. J.; Orlemann, O. F. (11 October 1943). (Technical report). University of Chicago Metallurgical Laboratory. CN-987. {{cite tech report}}: Missing or empty |title= (help)
  38. Fisher, R. W.; Vaslow, F.; Tevebaugh, A. D. (10 August 1944). (Technical report). Iowa State College. CN-1783. {{cite tech report}}: Missing or empty |title= (help)
  39. Florin, Alan E. (1 October 1944). (Technical report). University of Chicago Metallurgical Laboratory. CN-2159. {{cite tech report}}: Missing or empty |title= (help)
  40. Florin, Alan E. (16 October 1950). Plutonium Hexafluoride, Plutonium (VI) Oxyfluoride: Preparation, Identification, and Some Properties (PDF) (Technical report). Los Alamos Scientific Laboratory. LAMS-1118.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.