Sulfur tetrafluoride

Sulfur tetrafluoride is the chemical compound with the formula SF4. It is a colorless corrosive gas that releases dangerous HF upon exposure to water or moisture. Despite these unwelcome characteristics, this compound is a useful reagent for the preparation of organofluorine compounds,[3] some of which are important in the pharmaceutical and specialty chemical industries.

Sulfur tetrafluoride
Structural formula of sulfur tetrafluoride, showing dimernsions
Ball-and-stick model of sulfur tetrafluoride
Ball-and-stick model of sulfur tetrafluoride
Space-filling model of sulfur tetrafluoride
Space-filling model of sulfur tetrafluoride
Names
IUPAC name
Sulfur(IV) fluoride
Other names
Sulfur tetrafluoride
Identifiers
3D model (JSmol)
ChEBI
ChemSpider
ECHA InfoCard 100.029.103
RTECS number
  • WT4800000
UNII
UN number 2418
  • InChI=1S/F4S/c1-5(2,3)4 checkY
    Key: QHMQWEPBXSHHLH-UHFFFAOYSA-N checkY
  • InChI=1/F4S/c1-5(2,3)4
    Key: QHMQWEPBXSHHLH-UHFFFAOYAT
  • FS(F)(F)F
Properties
SF4
Molar mass 108.07 g/mol
Appearance colorless gas
Density 1.95 g/cm3, 78 °C
Melting point 121.0 °C
Boiling point 38 °C
reacts
Vapor pressure 10.5 atm (22°C)[1]
Structure
Seesaw (C2v)
0.632 D[2]
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
highly toxic
corrosive
NFPA 704 (fire diamond)
NFPA 704 four-colored diamond
3
0
2
NIOSH (US health exposure limits):
PEL (Permissible)
none[1]
REL (Recommended)
C 0.1 ppm (0.4 mg/m3)[1]
IDLH (Immediate danger)
N.D.[1]
Safety data sheet (SDS) ICSC 1456
Related compounds
Other anions
Sulfur dichloride
Disulfur dibromide
Sulfur trifluoride
Other cations
Oxygen difluoride
Selenium tetrafluoride
Tellurium tetrafluoride
Related sulfur fluorides
Disulfur difluoride
Sulfur difluoride
Disulfur decafluoride
Sulfur hexafluoride
Related compounds
Thionyl fluoride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)
Infobox references

Structure

Sulfur in SF4 is in the formal +4 oxidation state. Of sulfur's total of six valence electrons, two form a lone pair. The structure of SF4 can therefore be anticipated using the principles of VSEPR theory: it is a see-saw shape, with S at the center. One of the three equatorial positions is occupied by a nonbonding lone pair of electrons. Consequently, the molecule has two distinct types of F ligands, two axial and two equatorial. The relevant bond distances are S–Fax = 164.3 pm and S–Feq = 154.2 pm. It is typical for the axial ligands in hypervalent molecules to be bonded less strongly. In contrast to SF4, the related molecule SF6 has sulfur in the 6+ state, no valence electrons remain nonbonding on sulfur, hence the molecule adopts a highly symmetrical octahedral structure. Further contrasting with SF4, SF6 is extraordinarily inert chemically.

The 19F NMR spectrum of SF4 reveals only one signal, which indicates that the axial and equatorial F atom positions rapidly interconvert via pseudorotation.[4]

Intramolecular dynamic equilibration of SF4.

Synthesis and manufacture

At the laboratory scale, fluorination of elemental sulfur with cobaltic fluoride suffices:[5]

S + 4CoF3 SF4 + 4CoF2

For larger-scale syntheses, SF4 is produced by the reaction of SCl2 and NaF in acetonitrile:[6]

3 SCl2 + 4 NaF → SF4 + S2Cl2 + 4 NaCl

At higher temperatures (e.g. 225–450 °C), the solvent is superfluous. Moreover, sulfur dichloride may be replaced by elemental sulfur (S) and chlorine (Cl2).[7][8]

A low-temperature (e.g. 20–86 °C) alternative to the chlorinative process above uses liquid bromine (Br2) as oxidant and solvent:[9]

S(s) + 2 Br2(l; excess) + 4KF(s) → SF4↑ + 4 KBr(brom)

Use of SF4 for the synthesis of fluorocarbons

In organic synthesis, SF4 is used to convert COH and C=O groups into CF and CF2 groups, respectively.[10] Certain alcohols readily give the corresponding fluorocarbon. Ketones and aldehydes give geminal difluorides. The presence of protons alpha to the carbonyl leads to side reactions and diminished (30–40%) yield. Also diols can give cyclic sulfite esters, (RO)2SO. Carboxylic acids convert to trifluoromethyl derivatives. For example, treatment of heptanoic acid with SF4 at 100–130 °C produces 1,1,1-trifluoroheptane. Hexafluoro-2-butyne can be similarly produced from acetylenedicarboxylic acid. The coproducts from these fluorinations, including unreacted SF4 together with SOF2 and SO2, are toxic but can be neutralized by their treatment with aqueous KOH.

The use of SF4 is being superseded in recent years by the more conveniently handled diethylaminosulfur trifluoride, Et2NSF3, "DAST", where Et = CH3CH2.[11] This reagent is prepared from SF4:[12]

SF4 + Me3SiNEt2 → Et2NSF3 + Me3SiF

Other reactions

Sulfur chloride pentafluoride (SF
5
Cl
), a useful source of the SF5 group, is prepared from SF4.[13]

Hydrolysis of SF4 gives sulfur dioxide:[14]

SF4 + 2 H2O → SO2 + 4 HF

This reaction proceeds via the intermediacy of thionyl fluoride, which usually does not interfere with the use of SF4 as a reagent.[6]

Toxicity

SF
4
reacts inside the lungs with moisture, generating sulfur dioxide and hydrogen fluoride:[15]

SF4 + 2 H2O → SO2 + 4 HF

References

  1. NIOSH Pocket Guide to Chemical Hazards. "#0580". National Institute for Occupational Safety and Health (NIOSH).
  2. Tolles, W. M.; W. M. Gwinn, W. D. (1962). "Structure and Dipole Moment for SF4". J. Chem. Phys. 36 (5): 1119–1121. Bibcode:1962JChPh..36.1119T. doi:10.1063/1.1732702.
  3. Wang, C.-L. J. (2004). "Sulfur Tetrafluoride". In Paquette, L. (ed.). Encyclopedia of Reagents for Organic Synthesis. New York: J. Wiley & Sons. doi:10.1002/047084289X. hdl:10261/236866. ISBN 9780471936237.
  4. Holleman, A. F.; Wiberg, E. (2001). Inorganic Chemistry. San Diego: Academic Press. ISBN 0-12-352651-5.
  5. Kwasnik, W. (1963). "Fluorine compounds: Sulfur tetrafluoride". In Brauer, Georg (ed.). Handbook of Preparative Inorganic Chemistry. Vol. 1. Translated by Riley, Reed F. (2nd ed.). NY, NY: Academic Press. p. 168. LCCN 63-14307 via the Internet Archive.
  6. Fawcett, F. S.; Tullock, C. W. (1963). Sulfur (IV) Fluoride: (Sulfur Tetrafluoride). Inorganic Syntheses. Vol. 7. pp. 119–124. doi:10.1002/9780470132388.ch33.
  7. Tullock, C. W.; Fawcett, F. S.; Smith, W. C.; Coffman, D. D. (1960). "The Chemistry of Sulfur Tetrafluoride. I. The Synthesis of Sulfur Tetrafluoride". J. Am. Chem. Soc. 82 (3): 539–542. doi:10.1021/ja01488a011.
  8. US 2992073, Tullock, C.W., "Synthesis of Sulfur Tetrafluoride", issued 1961
  9. Winter, R.W.; Cook P.W. (2010). "A simplified and efficient bromine-facilitated SF4-preparation method". J. Fluorine Chem. 131: 780-783. doi:10.1016/j.jfluchem.2010.03.016
  10. Hasek, W. R. "1,1,1-Trifluoroheptane". Organic Syntheses.; Collective Volume, vol. 5, p. 1082
  11. Fauq, A. H. (2004). "N,N-Diethylaminosulfur Trifluoride". In Paquette, L. (ed.). Encyclopedia of Reagents for Organic Synthesis. New York: J. Wiley & Sons. doi:10.1002/047084289X. hdl:10261/236866. ISBN 9780471936237..
  12. W. J. Middleton; E. M. Bingham. "Diethylaminosulfur Trifluoride". Organic Syntheses.; Collective Volume, vol. 6, p. 440
  13. Nyman, F.; Roberts, H. L.; Seaton, T. (1966). "Sulfur Chloride Pentafluoride". Inorganic Syntheses. Inorganic Syntheses. Vol. 8. McGraw-Hill. p. 160. doi:10.1002/9780470132395.ch42. ISBN 9780470132395.
  14. Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8.
  15. Johnston, H. (2003). A Bridge not Attacked: Chemical Warfare Civilian Research During World War II. World Scientific. pp. 33–36. ISBN 981-238-153-8.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.