X
wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time.
This article has been viewed 24,635 times.
Learn more...
Building a house on Roblox and don't want noobs wandering into your mansion? Start with step one to build a door on Roblox.
Steps
-
1Open up Roblox Studio.
-
2Create a frame for the door out of normal parts. Make sure it's not too big or not too small and anchor the parts. It's a good idea to have a model of a character so you can judge the size on that. Try not to make the frame too thin but also not too thick.Advertisement
-
3Make the hinges that hold to door together and make it open. Place a small brick preferable with the same thickness of the frame at the bottom of the frame, making sure that there is space between one side of the frame and the brick you just put down. Do the same thing symmetrically at the top of the frame - this bit is really important!
-
4With the hinge(es) selected, go to the surface tool and select hinge. This turns the two parts into a hinge! A small axel should appear on the top of the two parts.
-
5Create the actual door. Make a brick that fits in the frame touching the hinges but not any of the frame walls.
-
6Anchor all the parts apart from the door and you are done! You can test your game using the play function.
Advertisement
Community Q&A
-
QuestionI tried to make a door, but it wouldn't work. Why?Community AnswerCheck to see if you anchored the door, or the door hits the frame.
-
QuestionHow do I make a block that I can walk through?Community AnswerYou have to be in ROBLOX studio. Click on the block you want to make walk-through, and go to the View tab. Click "Properties". A tab will pop up. Scroll down in the tab to a box that says "Can collide". The box will be checked, so click it to uncheck it. The block is now walk-through.
-
QuestionHow do I insert a hinge?WikiaWangTop AnswererGo to the "Model" tab and you'll see a section that reads "Constraints." Select the drop down menu and click "Hinge."
Advertisement
About This Article
Advertisement