How to Control the Temperature of a Smoker

Smokers are a great way to cook your food to perfection. It can take a while before your meal is ready to eat, but the results are well worth it. The dampers are the primary way to control the temperature, but you also have to consider other factors too, such as wind, fuel, and outdoor temperatures. Once you understand how these affect the smoker, you can become a master at smoking meat.

Part 1
Part 1 of 3:

Adjusting the Temperature

  1. Image titled Control the Temperature of a Smoker Step 1
    1
    Locate the intake damper. The intake damper is located at the bottom of the smoker, where the fuel is. It controls how much oxygen reaches the fire. You can open and close it however much is necessary.[1]
  2. Image titled Control the Temperature of a Smoker Step 2
    2
    Locate the exhaust damper. The exhaust damper is located near the top of the smoker. It helps pull the oxygen through the fire. It also allows the gases, heat, and smoke to leave the smoker. You should always leave the exhaust damper open least partway in order to maintain airflow.[2]
    Advertisement
  3. Image titled Control the Temperature of a Smoker Step 3
    3
    Open the intake damper all the way to generate high heat. This setting may vary from recipe to recipe, but in general, it lays between 450 and 550 °F (232 and 288 °C). In order to get the smoker this hot, you need to open the intake damper all the way to allow the most oxygen in.[3]
  4. Image titled Control the Temperature of a Smoker Step 4
    4
    Open the damper a quarter or halfway to get low or medium heat. The more you close the intake damper, the cooler the smoker will become. To get a medium heat range of 350 to 450 °F (177 to 232 °C), leave the intake damper open halfway. To get a low heat range of 250 to 350 °F (121 to 177 °C) leave the intake damper open a quarter of the way.[4]
  5. Image titled Control the Temperature of a Smoker Step 5
    5
    Open the damper up to a quarter of the way to get a low, slow smoke. Some recipes call for a low heat or a slow smoke. This usually converts to 225 to 275 °F (107 to 135 °C). In order to get the smoker this cool, you should leave the intake damper open an eighth to a quarter of the way.[5]
  6. Image titled Control the Temperature of a Smoker Step 6
    6
    Adjust the exhaust damper if adjusting the intake damper doesn't help. If the bottom vent is closed all the way and the temperature is still too hot, try closing the top vent a little--not all the way. You can also try removing some fuel with metal tongs. Never dose coals inside the smoker with water. On the other hand, if the smoker is running too cool, you can try opening the exhaust vent more.[6]
    • Still having trouble increasing airflow? Prop the lid open a little.
    7. Advertisement
Part 2
Part 2 of 3:

Maintaining the Temperature

  1. Image titled Control the Temperature of a Smoker Step 7
    1
    Keep the water pan full to maintain temperature. The water will help absorb the heat and regulate the temperature. Depending on the size of the pan, your smoker, and the temperature, expect to refill it every 3 to 4 hours. In most cases, you'll want to use hot water, but if the smoker is getting too hot, switch to cold water.[7]
    • The water pan should be in the middle of the cooking section, right under the bottommost cooking grate.[8]
  2. Image titled Control the Temperature of a Smoker Step 8
    2
    Don't peak. Much like using an oven, you should not peak at your food. Each time you open the lid, you will increase the airflow and temperature. The only time you should open the cooker is to turn the meat, check the fuel, or add water.[9]
  3. Image titled Control the Temperature of a Smoker Step 9
    3
    Be careful not to overshoot your target temperature. It can take a long time before the temperature on the smoker starts to rise. Once the temperature starts to rise, however, it can shoot up pretty quickly. Be extra-vigilant during this time and make minor adjustments before the temperature reaches the target.[10]
    • It is easy to overshoot your target temperature, but difficult to go back down to it.
    • If the temperature is rising too fast, close the damper a little. The temperature will still rise, just at a slower rate.
  4. Image titled Control the Temperature of a Smoker Step 10
    4
    Give your smoker time to adjust to the new settings. Any adjustments that you make to the intake damper or fuel won't happen immediately. Give it a couple minutes or hours before you try something new.[11]
  5. Image titled Control the Temperature of a Smoker Step 11
    5
    Be aware that the temperature will fluctuate naturally as the food cooks. Meat will absorb more heat during earlier stages of cooking, resulting in slower temperature rises. As the meat cooks, it will absorb less heat, resulting in faster temperature rises.[12]
    • The temperature may spike as your fuel breaks down. It should climb back down after about 15 to 30 minutes.
    6. Advertisement
Part 3
Part 3 of 3:

Troubleshooting the Smoker

  1. Image titled Control the Temperature of a Smoker Step 12
    1
    Perform a dry run the first time you use the smoker. A dry run is where you run your smoker without any food. This will help you gauge how long it takes your smoker to reach a certain temperature. Write down how long it takes for your smoker to reach the right temperature. Keep this for future reference.[13]
    • Use a lid thermometer to keep track of the temperatures inside the smoker.
    • Some smokers have built-in thermometers, but these can be off by 50 °F (10 °C).
  2. Image titled Control the Temperature of a Smoker Step 13
    2
    Make sure that the thermometer is away from the edge of the grate. Some parts of a smoker are much hotter than others. If you place your thermometer near these areas, you won't get an accurate temperature reading.[14]
    • Some thermometers, especially electric ones, are just inaccurate or go bad. You should replace it when this happens.
  3. Image titled Control the Temperature of a Smoker Step 14
    3
    Search for leaks if the temperature is inaccurate. If the temperature inside the smoker does not match the temperature on the damper, you may have a leak. This is especially common among cheap, barrel-shaped smokers. The leaks typically occur around seams. Once you find them, seal them with gaskets or food-safe silicone.[15]
    • If sealing leaks did not help, try using the exhaust damper instead of the bottom ones to adjust the temperature.
  4. Image titled Control the Temperature of a Smoker Step 15
    4
    Ensure that the smoker is clean. If the inside of the bowl or ash catcher are dirty, you will have poor airflow, which can affect the temperature. The bottom damper should also be clean to reduce clogs. If it is clogged, then you won't have enough oxygen reaching your fire, resulting in low temperatures.[16]
    • If your smoker tends to run too hot, leave it smoky and greasy inside. This will make it less reflective and allow it to radiate heat outside the smoker.[17]
  5. Image titled Control the Temperature of a Smoker Step 16
    5
    Adjust the intake damper on hot, cold, or windy days. If it is a hot or windy day, close the intake damper to reduce the temperature inside the smoker. If it is a cold day, open the damper in increase the temperature. If that doesn't help, try the following:[18]
    • Hot day: move the smoker out of sunlight or shield it with a canopy or patio umbrella.
    • Cold day: have extra fuel handy.
    • Windy day: work downwind or move the smoker next to a wall to shield it.
  6. Image titled Control the Temperature of a Smoker Step 17
    6
    Check the fuel if the temperature is not rising fast enough. If your intake damper is open and the temperature has not changed for several hours, give the charcoal or firewood a stir. If that doesn't help, add some more charcoal or firewood.[19]
    • Switch up the brand of fuel. Sometimes, that is all that you need to do. Not all brands are created equal.[20]
    • Lump charcoal tends to burn hotter and faster than coal briquettes.[21]
    • If the smoke is white, the wood may not be burning properly. Open the intake damper to allow more oxygen and create a hotter fire.
    7. Advertisement

Things You'll Need

  • Smoker
  • Lid thermometer
  • Water
  • Charcoal or firewood


You Might Also Like

Make Charcoal
How to
Make Charcoal
Fill a Propane Tank
How to
Fill a Propane Tank
How to
Use a Grill Pan
Store a Propane Tank Outside
How to
Store a Propane Tank Outside
Use an Electric Smoker
How to
Use an Electric Smoker
Start a Gas Grill
How to
Start a Gas Grill
Use a Smoker
How to
Use a Smoker
Use a Charcoal Grill
How to
Use a Charcoal Grill
Light a Charcoal Grill
How to
Light a Charcoal Grill
Use an Offset Smoker
How to
Use an Offset Smoker
Use a Charcoal Smoker
How to
Use a Charcoal Smoker
Build an Outdoor Barbeque
How to
Build an Outdoor Barbeque
Dispose of Lighter Fluid
How to
Dispose of Lighter Fluid
Measure the Remaining Propane
How to
Measure the Remaining Propane
Advertisement

References

  1. ↑ https://www.weber.com/US/en/blog/how-to-control-the-temperature-of-your-charcoal-grill
  2. ↑ https://www.weber.com/US/en/blog/how-to-control-the-temperature-of-your-charcoal-grill
  3. ↑ https://www.weber.com/US/en/blog/how-to-control-the-temperature-of-your-charcoal-grill
  4. ↑ https://www.weber.com/US/en/blog/how-to-control-the-temperature-of-your-charcoal-grill
  5. ↑ https://www.weber.com/US/en/blog/how-to-control-the-temperature-of-your-charcoal-grill
  6. ↑ http://virtualweberbullet.com/temperature-control-problems-too-hot-too-cool.html
  7. ↑ http://virtualweberbullet.com/temperature-control-problems-too-hot-too-cool.html
  8. ↑ http://virtualweberbullet.com/temperature-control-problems-too-hot-too-cool.html
  9. ↑ http://virtualweberbullet.com/temperature-control-problems-too-hot-too-cool.html
  1. ↑ https://www.smokedbbqsource.com/how-to-control-temperature-on-your-charcoal-smoker/
  2. ↑ https://www.smokedbbqsource.com/how-to-control-temperature-on-your-charcoal-smoker/
  3. ↑ http://virtualweberbullet.com/temperature-control-problems-too-hot-too-cool.html
  4. ↑ https://amazingribs.com/more-technique-and-science/grill-and-smoker-setup-and-firing/using-vents-control-temperature
  5. ↑ http://virtualweberbullet.com/temperature-control-problems-too-hot-too-cool.html
  6. ↑ https://amazingribs.com/more-technique-and-science/grill-and-smoker-setup-and-firing/using-vents-control-temperature
  7. ↑ https://www.weber.com/US/en/blog/how-to-control-the-temperature-of-your-charcoal-grill
  8. ↑ http://virtualweberbullet.com/temperature-control-problems-too-hot-too-cool.html
  9. ↑ http://virtualweberbullet.com/temperature-control-problems-too-hot-too-cool.html
  10. ↑ https://www.smokedbbqsource.com/how-to-control-temperature-on-your-charcoal-smoker/
  11. ↑ http://virtualweberbullet.com/temperature-control-problems-too-hot-too-cool.html
  12. ↑ http://virtualweberbullet.com/temperature-control-problems-too-hot-too-cool.html

About This Article

wikiHow Staff
Co-authored by:
wikiHow Staff
wikiHow Staff Writer
This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. This article has been viewed 51,421 times.
1 votes - 100%
Co-authors: 8
Updated: October 3, 2022
Views: 51,421
Categories: Barbecue Equipment
Advertisement