Setting up your GE Universal Remote to control your TV, DVD player, gaming systems, and other devices is easy—you can program it manually by entering a code or by searching for a code automatically. This wikiHow guide will help you search for the right codes for your GE Universal Remote, and teach you how to scan for codes without entering a code at all.

Method 1
Method 1 of 3:

Entering a Code

  1. 1
    Open the battery compartment of your GE universal remote control and remove the batteries.
  2. 2
    Locate the version number of your remote. You'll find this info on the white sticker inside the battery compartment. Look for V1-V5, none = V1 (older), newest = CL3 or CL4.[1]
    Advertisement
  3. 3
    Re-insert the batteries and replace the battery cover.
  4. 4
    Go to https://byjasco.com/support/ge-universal-remote-codes in a web browser. This website features a full list of programming codes for the GE Universal Remote.
  5. 5
    Scroll down and click CL3, CL4, or CL5. Click the button that corresponds with the version number you found inside the battery compartment.
  6. 6
    Select a device category from the "Device Category" drop-down menu. For example, if you want to find the code for an Xbox, select Game from the menu.
    • Some devices have multiple codes. In some cases, you may need to try one or more codes until you find a code compatible for your device.
  7. 7
    Select the brand from the "Brand Name" menu. Once selected, you will see one or more codes for that device.
  8. 8
    Turn on the device you want to program. For example, if you plan to use the remote for your DVD player, power that device on now.
  9. 9
    Press and hold down the Setup button until the red light comes on. The light is usually at the top of the remote or on the power button. Release your finger once the red light is visible.
  10. 10
    Press the button for the device you want to program. For example, if programming the remote for use with your DVD player, press and release the DVD button. The red light will blink and then stay solid.
    • If there's no button for the device specifically for the device want to program, choose any other device button. The name of the button is just for ease of use.
  11. 11
    Enter the device code. If you see multiple device codes for your device, enter the one at the top of the list. The red light will turn off once the code is entered.
  12. 12
    Aim the remote at the device you’re programming and press Power. If the device turns off, the code is correct, and you can now use the remote to control that device.
    • If the device doesn't power off, try the next code on the list.
    • If none of the codes work for your device, try using the "Searching for a Code Automatically" method.
  13. 13
    Program more devices if needed.
  14. Advertisement
Method 2
Method 2 of 3:

Code Search Programming

  1. 1
    Power on the device you want to control. For example, if you want to use your GE remote to program your TV, turn on the TV now.
  2. 2
    Press and hold down the Setup button until the red light comes on. The light is usually at the top of the remote or on the power button. Release your finger once the red light is visible.
  3. 3
    Press the button for the device you want to program. For example, if programming the remote for use with your DVD player, press and release the DVD button. The red light will blink and then stay solid.
  4. 4
    Point the remote at the device and press Power. If you want to control a DVD player, press Play instead. This begins the code search, and the red indicator light will flash about every 2 seconds during the process.[2] .
    • It's important to keep pointing the remote at the device during the code search.
    • If the light does not blink automatically, you'll need to press the Power or Play button manually every 2 seconds to search for the code.
  5. 5
    Place your finger over the 1 key. It's the numeral "1" on the remote. Don't press the button—just hold your finger there, as you'll need to act quickly to lock in the code when the device either turns off or begins to play.
    • If you had to press the Power or Play button manually to code search, the lock-in key might be Enter, Mute, or Save instead of the 1 key.[3]
  6. 6
    Press 1 when the device turns off or begins to play. This is a signal that the appropriate code has been found. Once the code is saved, the red indicator light will turn off.
    • If you had to press the Power or Play button manually to code search, press and release either Enter, OK, or Save to lock in the code.[4]
  7. Advertisement
Method 3
Method 3 of 3:

Troubleshooting Remote Problems

  1. 1
    Replace the batteries in your remote if it fails to respond. Low battery life can sometimes keep you from being able to program a device.
  2. 2
    Remove physical obstacles between the remote and the device(s). Walls and large pieces of furniture can prevent the remote from making contact with your devices.
  3. 3
    Keep in mind that the GE Universal Remote may not control all aspects of a device. For example, you may be able to use the remote to power your device off and on, but you may not be able to adjust or control the volume of your device. This means you may need to keep other remotes nearby for more advanced features.
  4. Advertisement

Community Q&A

  • Question
    My GE universal remote turns the TV on and off but will not change the channel. What can I do?
    Community Answer
    Community Answer
    It is probably a suboptimal code issue. Retry with another code or try/retry the code search programming method.
  • Question
    How do I program a GE Universal remote?
    Community Answer
    Community Answer
    Read the instructional booklet.
  • Question
    How do I unmute with a GE universal remote?
    Community Answer
    Community Answer
    You should see a 'mute' button on your remote that can be used to mute and unmute the volume. If you don't see the mute/unmute button, you can try checking the manual that came with your TV. If nothing else works, contact the manufacturer.
Advertisement

About This Article

Nicole Levine, MFA
Written by:
wikiHow Technology Writer
This article was co-authored by wikiHow staff writer, Nicole Levine, MFA. Nicole Levine is a Technology Writer and Editor for wikiHow. She has more than 20 years of experience creating technical documentation and leading support teams at major web hosting and software companies. Nicole also holds an MFA in Creative Writing from Portland State University and teaches composition, fiction-writing, and zine-making at various institutions. This article has been viewed 877,175 times.
How helpful is this?
Co-authors: 14
Updated: November 22, 2022
Views: 877,175
Article SummaryX

1. Find the version number under the battery.
2. Look up the code at https://byjasco.com/support/ge-universal-remote-codes.
3. Turn on the device you want to control.
4. Press and hold Setup until the light comes on.
5. Press the device button, such as DVD.
6. Enter the code.
7. Press the Power button to test the code.

Did this summary help you?
Advertisement