Putting out a candle may not seem like a task that requires much explanation, but you might be surprised at how many different ways there are to do it, and the effects each has on the life of the candle. Should you simply blow out the flame, or is it better to use another object to stifle it? Is it safe to use your fingers if there’s nothing else around? The short answer is that different methods will work best for different purposes.

Method 1
Method 1 of 4:

Blowing out the Candle

  1. 1
    Position your face close to the flame. Move in until you’re only a few inches away, with the wick at around mouth level. This way, the air won’t have to travel as far to reach the flame, which will allow you to put it out easier.[1]
    • Don’t hover directly over the candle, or the heat rising from the flame may burn you.
  2. 2
    Purse your lips together and blow. Exhale suddenly through the opening in your lips. The key is to create a thin stream of air that will put out the candle in one quick gust. Keep blowing until the flame is completely extinguished.[2]
    • If the flame sputters but doesn’t go out, you may not be blowing directly on it.
    • Be careful not to blow too forcefully—doing so can send droplets of wax spraying, resulting in a big mess or even minor burns.
    Advertisement
  3. 3
    Stand clear of the smoke. When you blow out a candle, it releases a plume of thick, dark smoke. Keeping your distance from the extinguished candle will prevent this smoke from depositing soot on your skin or clothes or causing them to smell.[3]
    • Whenever possible, make it a point to extinguish your candles in a well-ventilated area where smoke won’t collect.
    • Over the long term, blowing out your candles can lead to unsightly black buildup on the wax or around the the inside of the container.[4]
  4. Advertisement
Method 2
Method 2 of 4:

Using a Candle Snuffer

  1. 1
    Grab a candle snuffer. Some people dislike the sooty mess that blowing out a candle can leave behind. For these people, a metal candle snuffer can provide a cleaner, more efficient alternative. These make useful tools to have on hand if you want to keep your candles looking clean and new for as long as possible.[5]
    • Snuffers have been used for centuries to extinguish fire lights with minimal smoke.[6]
    • Candle snuffers of various sizes can usually be found wherever candles are sold.
  2. 2
    Place the bell of the snuffer over the wick. The bell is the small metal cup at the end of the long handle. When you lower the bell over the flame, it deprives it of oxygen, stifling it gradually. Unlike blowing out the candle, this won’t create as much smoke or soot.[7]
    • Some candle snuffers may resemble a cylinder, pyramid or disc instead of a rounded bell.
    • Keep your hand a safe distance away from the flame to prevent accidents.
  3. 3
    Hold the snuffer in place until the flame goes out completely. You may see a small wisp of smoke escape from around the edges of the bell. Keep it over the wick for at least one full second. Afterward, cover the candle with a lid and store the snuffer in a safe, out-of-the-way place.[8]
    • If you don’t hold the snuffer long enough, the flame may reignite, forcing you to try a second time.
    • Be careful handling metal snuffers while they’re still hot.
  4. Advertisement
Method 3
Method 3 of 4:

Drenching the Wick in Wax

  1. 1
    Take hold of the wick with a wick dipper or pair of tweezers. Bring the wick dipper around the sides of the wick, rather than directly over the top. Get a secure grip on the wick and hold it steady.[9]
    • If you don’t have a wick dipper on hand, you could also use another long, slender implement, such as a chopstick or paperclip, to force the wick down.
    • In some cases, the pressure from the wick dipper or tweezers may be enough to put the flame out on its own.[10]
  2. 2
    Press the wick into the melted candle wax. Bend the wick at an angle until it’s fully submerged in the liquid wax. This will kill the flame without producing any unpleasant scents or smoke.[11]
    • Be sure to pull the wick out right away to keep from losing it inside the wax pool.
    • You’ll have the most success using wick dippers, tweezers and other tools on free-standing candles with minimal tunneling (the sinking that occurs when the wax around the wick burns down faster than the rest of the candle).[12]
  3. 3
    Straighten the wick. Remove the wick from the wax and smooth it out so that it stands up on its own. Be careful not to break it or pull it out of the candle while you're doing this. Let the wax cool before handling the wick any further.
    • Extinguishing the candle in its own wax has the added benefit of conditioning the wick, allowing it to light easier and stay lit longer during future uses.[13]
  4. 4
    Trim the wick. Once the wax has had time to dry, use a wick trimmer to clip away the frayed, burnt tip. ⅛” (.31cm) is just about the perfect length to keep the wick burning brighter for longer. Discard the burnt wick tip, along with any other debris that may have fallen into the wax—these can present a fire hazard if they reignite.[14]
    • A pair of manicure scissors or nail clippers makes an acceptable substitute for a traditional wick trimmer.
    • Get in the habit of trimming the wicks of your candles every time you use them. A pristine wick burns more evenly, which can greatly lengthen a candle’s lifespan.
  5. Advertisement
Method 4
Method 4 of 4:

Putting out the Flame with Your Fingers

  1. 1
    Lick the tips of your fingers. Run the pads of your fingers over your tongue just enough to moisten them slightly. Most people prefer to use their thumb and forefinger, but any two fingers will suffice. The idea is to wet them just enough to stifle the candle with a light touch.[15]
    • Wetting your fingers will also help protect your skin from the heat of the flame.
    • If there’s a source of water nearby (like a sink or drinking glass), you can prepare your fingers that way, as well.
  2. 2
    Pinch and release the wick quickly. In one rapid motion, grasp the wick between your two fingers. The moisture should cause the flame to die as soon as you make contact. Make sure you let go immediately so as not to take any chances.[16]
    • You may feel a warm sensation momentarily. Once the flame is out, however, the heat will dissipate almost instantly.
    • The sizzling sound you hear is nothing to worry about—it’s just the moisture on your fingertips evaporating.
  3. 3
    Be careful not to burn yourself. Needless to say, attempting to extinguish a candle wick with exposed fingers is risky, since it requires you to actually touch it. Always exercise the utmost caution anytime you bring any part of your body close to a burning candle. If the flame doesn’t go out, try again or give a different method a shot.
    • Practice a few times on an unlit candle (with dry fingers) before you try for real.
    • The inherent danger of using your fingers to put out a candle makes this more of a neat party trick than a practical everyday solution.
  4. Advertisement

Community Q&A

  • Question
    Can I extinguish a candle with a liquid such as kerosene?
    Community Answer
    Community Answer
    No, trying to extinguish a candle with kerosene would cause a large fire.
  • Question
    Can I pour gasoline on the candle to extinguish it?
    oneofthepoisoned
    oneofthepoisoned
    Community Answer
    No, as that would add more fuel to the flame and cause an even larger fire.
Advertisement

Warnings

  • Never attempt to put out a candle by pouring water or any other liquid on it. This may permanently ruin the wick.
    ⧼thumbs_response⧽
  • Be extremely careful anytime you move your hands near an open flame. Remember—fire is dangerous, and even a small one can cause serious burns or other accidents.
    ⧼thumbs_response⧽
  • Always make sure the flame has been properly extinguished before walking away from a candle. An unattended candle may present a fire hazard.
    ⧼thumbs_response⧽
Advertisement

Things You'll Need

  • Candle
  • Candle snuffer
  • Wick dipper
  • Wick trimmer
  • Manicure scissors (optional)
  • Nail clippers (optional)
  • Long, slender object (for dipping wick)

About This Article

wikiHow Staff
Co-authored by:
wikiHow Staff Writer
This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. This article has been viewed 117,962 times.
78 votes - 81%
Co-authors: 11
Updated: December 10, 2022
Views: 117,962
Categories: Lighting
Article SummaryX

The most obvious way to put out a candle is by blowing out the flame, but there are other ways you can extinguish one. You can put out the flame with your fingers by licking the tips of your fingers and pinching the wick quickly. Obviously, with this method the biggest issue is burning yourself, so make sure to release the wick quickly. If you have tweezers handy, use them to grasp the wick. Then, bend the wick until it’s in the liquid wax, which will kill the flame. Make sure to pull the wick out again right away to avoid losing it inside the pool of wax. Straighten the wick back up again, and once the wax is dry clip away the burnt, frayed tip. To learn how to extinguish your candle with a snuffer, keep reading!

Did this summary help you?
Advertisement