Download Audio Download Audio

Ingredients

  • 2 cups of sugar
  • 1 cup of butter
  • 4 eggs
  • 4 teaspoons vanilla extract
  • 3 cups all-purpose flour
  • 3 ½ teaspoons baking powder
  • 1 cup of milk
  • 2 cups salted butter
  • 6 teaspoons vanilla extract
  • 8 cups powdered sugar
  • 8 tablespoons whole milk or heavy cream
  • 4 teaspoons meringue powder (optional
  • Green and Blue food dye
  • Rolled fondant; look for multi-colored fondant at a craft store. [1] You can also make your own. [2]
  • Cinnamon red hot candies for the eyes
  • Candy corn for the tail spikes
  • Chocolate chips for toenails
  • Toasted coconut for the prehistoric grass
Part 1
Part 1 of 4:

Making the Basic Cake for the Body

  1. 1
    Mix your cake batter.[3] Cakes made from scratch will be denser and stronger than a cake mix.
    • Using the ingredients list above, combine sugar and butter, then beat in the eggs and vanilla. Mix flour and baking powder together, and then combine the dry ingredients with the sugar-butter-egg mixture. Use the milk to thin out the batter.
    • Cream the butter, sugar, and eggs together really well before adding dry ingredients to your batter.
  2. 2
    Bake the cakes. Separate the batter into two greased 9" round pans, and put them into a preheated 350-degree oven. They should take 30 to 40 minutes to bake.
  3. Advertisement
Part 2
Part 2 of 4:

Making Basic Buttercream Icing

  1. 1
    Make Buttercream Icing while the cakes cool. Following the ingredients list above, use a hand-mixer to cream the butter with the vanilla. Slowly add the powdered sugar. Add the meringue powder for hold, and then slowly add the milk until your frosting is the desired consistency.
    • Use room-temperature butter and whip the ingredients together so the buttercream is smooth, light, and fluffy.
  2. 2
    Separate the frosting into 4 parts. 2/4 should be dyed green, ¼ should be white, and ¼ should be dyed blue.
  3. 3
    Allow your cakes to cool completely. If you have time, freeze the cakes before assembling the dinosaur. This will help manage the crumbly effect that occurs when you frost it.
    • Remove the cake from the sheet tray and allow it to cool on a kitchen towel.
  4. Advertisement
Part 3
Part 3 of 4:

Assembling the Dinosaur

  1. 1
    Make a paper template based on this image (click to enlarge). If you have a printer that can print on 11”x17” paper, you can print it large enough for a 9" cake. Otherwise, take a piece of light construction paper and replicate them by hand. The diameter of the circle should fit a 9" cake.
  2. 2
    Cut out the body of the dinosaur. Find the center of one cake. Cut the cake in half with a serrated bread knife. Put the two halves together with cut edges aligned, and place it on your serving plate. This is the body of the dinosaur. Set it aside.
  3. 3
    Cut out other body parts. Cut out the different parts of the paper template along their lines, arrange them on the cake, and carve the cake accordingly.
    • Before you actually cut the cake, you can arrange the paper pieces to see how they look. If there are any cuts or adjustments you'd like to make, you can plan ahead now.
  4. 4
    Assemble the dinosaur on the serving board. Look to the attached photo for help. Use white frosting to join the two body halves together. Add the appendages to the body by stacking them close.
    • Put the head on the body with some toothpicks (take note of where they are so that you don't accidentally include them in a slice of cake later). Trim the corners and square edges off the feet and shoulders if you like, but the corners will not be a problem once you frost the cake.
  5. Advertisement
Part 4
Part 4 of 4:

Finishing Touches with Decorations

  1. 1
    Spread a thin layer of green frosting over the cake with a spatula. This is called the crumb coat -- and for good reason, as much of the crumbs pull away and get mixed up in the frosting. Use a very light hand on the cut surfaces of the cake. This is where having made the cake from scratch will be of most help, as cake mixes are far more crumbly and difficult to work with.
  2. 2
    Add scales to the dinosaur. Use a star tip to pipe on green frosting, then add blue stars for accents along the back and head.
  3. 3
    Roll the fondant out 1/8 inch (3mm) thick. Hand cut the fondant with a small knife to create diamond shapes for the plates on the dinosaur's back. Detail the plates with a toothpick to give them a ribbed texture. Make as many or as few as you'd like to put on the dinosaur's back.
  4. 4
    Add the fondant plates. Stick fondant diamond plates into the back. If the frosting does not hold the plates well, stick a toothpick into the plate then stick it into the cake.
  5. 5
    Add candy for a finishing touch. Use candy corn for spikes on the tail, cinnamon candies for the eyes, and chocolate chips for the toes. You can also use any other candy you can think of to accent the tail and head.
  6. 6
    Decorate the cake board. You can use green icing to pipe grass onto the cake board for your herbivore dino to graze on. Or, spread a layer of icing on the board and sprinkle it with toasted coconut flakes to simulate rocky terrain.
    • Make palm trees with pirouette cookies for the trunk and pieces of parsley for the palms so it looks like your dinosaur is in a forest.
    • If you have them, you can use plastic dinosaur toys for fun.
  7. Advertisement

Community Q&A

  • Question
    How do I make fondant?
    Maryanne Snelling
    Maryanne Snelling
    Community Answer
    I make my fondant by melting marshmallows in the microwave with a pad of butter. Then I mix in a ton of powdered sugar. I keep adding sugar until I get the consistency I need.
  • Question
    Should this cake be refrigerated after it has been assembled or is buttercream okay to sit out at room temperature overnight?
    Community Answer
    Community Answer
    It is okay to leave it out at room temperature overnight. However, if you put your cake in the fridge overnight, the buttercream will become firmer.
  • Question
    How do I print a copy of the template?
    Community Answer
    Community Answer
    Enlarge the template until the results are about 9 inches wide. Computer paper is only 8 1/2 inches wide, but you can draw in that last half inch if needed by adding a little strip of paper on one side of your template.
Advertisement

Warnings

  • Be careful to use separate tips for different colors of frosting, or you could contaminate the colors.
    ⧼thumbs_response⧽
  • The head might fall off if it's too big or doesn't have enough support- if this is an issue, use some of the extra cake to create something to support the head (a bush, tree, house, another dinosaur).
    ⧼thumbs_response⧽
  • Each toothpick pokes a hole in the cake, so don't use too many. Stick to the least number necessary to hold the cake together. Try to remember where they are and avoid serving someone a slice of cake containing a hidden toothpick.
    ⧼thumbs_response⧽
Advertisement

Things You'll Need

  • One cardboard cake board, half-sheet size
  • Frosting pipe tips and bags; use a star tip
  • Non-stick mini rolling pin
  • Two nine-inch round cake pans.

About This Article

Quynh La
Co-authored by:
Professional Baker
This article was co-authored by Quynh La. Quynh La is a Professional Baker and the Owner of Sugar Bakery & Cafe in Seattle, Washington. With over seven years of experience, she specializes in baking cakes, cookies, croissants, and bread. Quynh holds an AAS in Culinary Arts from South Seattle College and a second AAS in Specialty Desserts & Bread from Seattle Central College. This article has been viewed 906,021 times.
3 votes - 100%
Co-authors: 41
Updated: March 16, 2023
Views: 906,021
Article SummaryX

To make a 3D dinosaur birthday cake, start by baking two 9-inch round cakes. Then, cut one of the cakes in half and cut out a tail, head, and 4 legs from the other cake. Next, make the dinosaur's body by laying the 2 large cake halves cut-side down on a serving board so they're right next to each other. Then, stick the dinosaur's tail, head, and legs to the body using frosting. Once the dinosaur is assembled, cover it with fondant and you're finished! To learn how to add finishing touches to your 3D dinosaur cake, scroll down!

Did this summary help you?
Advertisement