The complete guide to compiling C code with GCC on Linux and Windows

Are you ready to turn your C code into an executable program? The GNU C compiler, also known as GCC, is a simple Linux-based C compiler that's easy to use from the command line. If you're using Linux, including Ubuntu, Fedora, and Linux Mint, you can install GCC from your distribution's package manager. On Windows 10 and 11, you can use GCC in a Windows Subsystem for Linux (WSL) shell, or by installing an open source tool called MinGW. This wikiHow guide will teach you the easiest ways to compile a C program from source code using GCC.

Things You Should Know

  • To make sure GCC is installed, run the command gcc --version.
  • Type gcc source_file.c -o program_name and press Enter to compile your source code.
  • Replace source_file with the name of your source code file, and program_name with the name you'd like to give your compiled program.
Method 1
Method 1 of 3:

Using Linux

  1. 1
    Install your distribution's build tools. Most versions of Linux don't come with GCC already installed. Fortunately, it's easy to install GCC and other required tools (including make, G++, and general development libraries) for compiling software on any version of Linux:
    • Ubuntu, Debian, & Linux Mint:
      • In a terminal window, type sudo apt update and press Enter.
      • Type sudo apt install build-essential and press Enter.[1]
      • Type gcc --version and press Enter to verify your installation.
    • CentOS, Fedora, and Red Hat:
      • In a terminal window, type sudo dnf group install "Development Tools" and press Enter.[2]
      • Type gcc --version and press Enter to verify your installation.
  2. 2
    Go to the directory that contains your source code. Use the cd command to change to the directory in which you've saved the source code you want to compile.
    • For example, if your source code is in a folder called Documents that's inside your home directory, use cd ~/Documents.
    Advertisement
  3. 3
    Type gcc -o [executable_name] [source_file].c and press Enter. Replace “[source_file].c” with the name of your source code file, and “[executable_name]” with the name you'd like to give your compiled program.
    • If you need to compile a program from multiple source files, use the syntax gcc -o [executable_name] sourcefile1.c sourcefile2.c sourcefile3.c.
    • If you see errors and want to see more information about them, use gcc -Wall -o errorlog file1.c.[3] Then, view the “errorlog” file in the current directory with cat errorlog.
    • To compile multiple programs at once with multiple source code files, use gcc -c file1.c file2.c file3.c.
  4. 4
    Run your newly-compiled program. Type ./[executable_name] but replace “[executable_name]” with the name of your program.
  5. Advertisement
Method 2
Method 2 of 3:

Using Windows Subsystem for Linux

  1. 1
    Open a bash shell in Windows Subsystem for Linux. If you're using Windows 10 or Windows 11 with Windows Subsystem for Linux installed, you can easily compile software with the GCC compiler. However, you'll need to install GCC first, as it isn't installed automatically.
    • If you haven't already enabled Windows Subsystem for Linux (WSL), you can install it with a single command from the command prompt or PowerShell. Start Command Prompt or PowerShell as an administrator, and then run this command to install Ubuntu: wsl --install.[4]
      • If you see the WSL help text when running the command, you may have already enabled WSL. Instead, run the command wsl --list –online to see a list of Linux distributions, then use wsl --install -d <DistroName> (e.g., Ubuntu) to install Ubuntu.
    • Once installed, you can open an Ubuntu bash shell by typing ubuntu into the Windows Search bar and clicking Ubuntu in the search results.[5]
  2. 2
    Install the build tools for Ubuntu. These tools include the GCC compiler, as well as all of the libraries you'll need to compile and debug C and C++ code.
    • Type sudo apt update and press Enter.
    • Type sudo apt-get install build-essential gdb and press Enter.[6]
  3. 3
    Go to the directory that contains your source code. Use the cd commanad to change to the directory in which you've saved the source code you want to compile.
  4. 4
    Type gcc -o [executable_name] [source_file].c and press Enter. Replace “[source_file].c” with the name of your source code file, and “[executable_name]” with the name you'd like to give your compiled program.
    • If you need to compile a program from multiple source files, use the syntax gcc -o [executable_name] sourcefile1.c sourcefile2.c sourcefile3.c.
    • If you see errors and want to see more information about them, use gcc -Wall -o errorlog file1.c.[7] Then, view the “errorlog” file in the current directory with cat errorlog.
    • To compile multiple programs at once with multiple source code files, use gcc -c file1.c file2.c file3.c.
  5. 5
    Run your newly-compiled program. Type ./[executable_name] but replace “[executable_name]” with the name of your program.
  6. Advertisement
Method 3
Method 3 of 3:

Using MinGW for Windows

  1. 1
    Download Minimalist GNU for Windows (MinGW). This is an easy-to-install version of GCC for Windows. You can download the installer from https://osdn.net/projects/mingw.[8]
    • To get the latest version of the installer, click the mingw-get-setup.exe link.
    • If the download doesn't begin automatically, click Save or Download when prompted.
    • MinGW can only compile 32-bit versions of software. However, all 32-bit software compiled with MinGW will execute properly on a 64-bit system.[9]
    • If you need to compile 64-bit software, try MinGW-w64, a port of MinGW. You can download it from https://www.mingw-w64.org.[10] Alternatively, you can use Windows Subsystem for Linux.
  2. 2
    Install MinGW. Once you've downloaded the installer, double-click it to install MinGW.
      • MinGW recommends using the default installation folder (C:\MinGW). If you must change the folder, don’t use a folder with spaces in the name (e.g. “Program Files”).
  3. 3
    Select Basic Setup to view the basic C compiling tools. If you want more options, you can select All Packages to see all available libraries and build tools.
  4. 4
    Right-click each package and click Mark for Installation. The Basic Setup has about 7 packages listed in the box at the top. Right-click each one of them (or just the ones you want) and click Mark for Installation. This adds an icon with an arrow next to each one and marks it for installation.
    • At the very least, you will want to install MinGW32-base and MinGW32-gcc-g++. If you need to compile code written in objective C, you should also mark MinGW32-gcc-objc for installation.
  5. 5
    Install the selected packages. It may take your computer several minutes to install all packages. Use the following steps to install the packages that are marked for installation.
    • Click the Installation menu in the upper-left corner.
    • Click Apply Changes.
    • Click Apply.
    • Click Close once the installation is done.
  6. 6
    Add the path to MinGW to system environment variables. Use the following steps to add the path to MinGW to system environment variables:
    • Type environment in the search bar next to the Start menu.
    • Click Edit the system environment variables in the search results.
    • Click Environment Variables…
    • Select the Path variable in the "System variables" section.
    • Click Edit beneath the top box (under “User Variables”)
    • Click New.
    • Type C:\MinGW\bin in the new space. Note that if you installed MinGW to a different directory, enter C:\path-to-that-directory\bin.
    • Click OK, and then OK again. Click the one remaining OK button to close the window.
  7. 7
    Open the command prompt as an administrator. You must be signed in to a Windows account with administrative privileges to open the Command Prompt as an administrator. Use the following steps to open the Command Prompt as an administrator:
    • Type cmd in the search bar next to the Start menu.
    • Right-click Command Prompt in the search results, then select Run as Administrator.
    • Click Yes to allow changes.
  8. 8
    Go to the folder where your source code is saved. For example, if your source code file called helloworld.c is located in C:\Source\Programs, type cd C:\Source\Programs and press Enter.
  9. 9
    Type gcc c –o [program_name].exe [program_name].c and press Enter. Replace “[program_name]” with the name of your source code and application. Once the program is compiled, you’ll return to the command prompt without errors.
    • Any coding errors that appear must be corrected before the program will compile.
  10. 10
    Type the name of your program to run it. If it’s called hello_world.exe, type that in the command prompt and press Enter to start your program.
    • If you receive an "Access is denied" or "Permission denied" error message when compiling a program or running the output executable file, check the folder permissions and make sure you have full read/write access to the folder that contains the source code. If that doesn't work, try temporarily disabling your virus software.[11]
  11. Advertisement

Community Q&A

  • Question
    What do I do if there are two tables in the environmental variables window? In which table and directory should I add an environmental variable?
    Community Answer
    Community Answer
    Use the upper table entitled "User Variables for" and select the "Path" directory.
  • Question
    What is a good compiler for C language?
    Community Answer
    Community Answer
    The MinGW GCC compiler will work well.
  • Question
    Is the extension .exe necessary in a compiling program?
    Community Answer
    Community Answer
    Theoretically, as long as a file contains the necessary binary machine code, it could be run by a processor. One example is how on Windows, a screensaver is simply a program (just like a .exe) but with the .scr extension. However, as far as I know, most modern operating systems will not attempt to execute a file if it does not identify the file type as being executable, so you would need to somehow trick the operating system into actually starting a new process using the code from the file.
Advertisement

About This Article

Nicole Levine, MFA
Written by:
wikiHow Technology Writer
This article was co-authored by wikiHow staff writer, Nicole Levine, MFA. Nicole Levine is a Technology Writer and Editor for wikiHow. She has more than 20 years of experience creating technical documentation and leading support teams at major web hosting and software companies. Nicole also holds an MFA in Creative Writing from Portland State University and teaches composition, fiction-writing, and zine-making at various institutions. This article has been viewed 971,424 times.
How helpful is this?
Co-authors: 36
Updated: February 7, 2023
Views: 971,424
Article SummaryX

1. Open the Terminal in Linux.
2. Type "sudo apt update" and press Enter.
3. Type "sudo apt install build-essential" and press Enter to install GCC and other packages.
4. Type "gcc --version" to verify the GCC installation.
5. Use the "CD" command to navigate to the folder with your source code.
6. Type "gcc [program_name].c –o [executable_name]" to compile the program.
7. Type ""./[executable_name]" to run the newly compiled program.

Did this summary help you?
Advertisement