Mercury(II) chloride

Mercuric chloride is occasionally used to form an amalgam with metals, such as aluminium.[6] Upon treatment with an aqueous solution of mercuric chloride, aluminium strips quickly become covered by a thin layer of the amalgam. Normally, aluminium is protected by a thin layer of oxide, thus making it inert. Once amalgamated, aluminium can undergo a variety of reactions. For example, upon removal of the oxide layer, the exposed aluminium will immediately react with water generating Al(OH)₃ and hydrogen gas. Halocarbons react with amalgamated aluminium in the Barbier reaction. These alkylaluminium compounds are nucleophilic and can be used in a similar fashion to the Grignard reagent. Amalgamated aluminium is also used as a reducing agent in organic synthesis. Zinc is also commonly amalgamated using mercuric chloride.

Mercuric chloride is used to remove dithiane groups attached to a carbonyl in an umpolung reaction. This reaction exploits the high affinity of Hg²⁺ for anionic sulfur ligands.

Mercuric chloride may be used as a stabilising agent for chemicals and analytical samples. Care must be taken to ensure that detected mercuric chloride does not eclipse the signals of other components in the sample, such as is possible in gas chromatography.[7]

Mercury(II) chloride was used as a photographic intensifier to produce positive pictures in the collodion process of the 1800s. When applied to a negative, the mercury(II) chloride whitens and thickens the image, thereby increasing the opacity of the shadows and creating the illusion of a positive image.[8]

For the preservation of anthropological and biological specimens during the late 19th and early 20th centuries, objects were dipped in or were painted with a "mercuric solution". This was done to prevent the specimens' destruction by moths, mites and mold. Objects in drawers were protected by scattering crystalline mercuric chloride over them.[9] It finds minor use in tanning, and wood was preserved by kyanizing (soaking in mercuric chloride).[10] Mercuric chloride was one of the three chemicals used for railroad tie wood treatment between 1830 and 1856 in Europe and the United States. Limited railroad ties were treated in the United States until there were concerns over lumber shortages in the 1890s.[11] The process was generally abandoned because mercuric chloride was water-soluble and not effective for the long term, as well as being highly poisonous. Furthermore, alternative treatment processes, such as copper sulfate, zinc chloride, and ultimately creosote; were found to be less toxic. Limited kyanizing was used for some railroad ties in the 1890s and early 1900s.[12]

Mercuric chloride was a common over-the-counter disinfectant in the early twentieth century, recommended for everything from fighting measles germs[13] to protecting fur coats[14] and exterminating red ants.[15] A New York physician, Carlin Philips, wrote in 1913 that "it is one of our most popular and effective household antiseptics", but so corrosive and poisonous that it should only be available by prescription.[16] A group of physicians in Chicago made the same demand later the same month. The product frequently caused accidental poisonings and was used as a suicide method.[17]

It was used to disinfect wounds by Arab physicians in the Middle Ages.[18] It continued to be used by Arab physicians into the twentieth century, until modern medicine deemed it unsafe for use.

Syphilis was frequently treated with mercuric chloride before the advent of antibiotics. It was inhaled, ingested, injected, and applied topically. Both mercuric-chloride treatment for syphilis and poisoning during the course of treatment were so common that the latter's symptoms were often confused with those of syphilis. This use of "salts of white mercury" is referred to in the English-language folk song "The Unfortunate Rake".[19]

Yaws was treated with mercuric chloride (labeled as Corrosive Sublimate) before the advent of antibiotics. It was applied topically to alleviate ulcerative symptoms. Evidence of this is found in Jack London's book The Cruise of the Snark in the chapter entitled "The Amateur M.D."

• In volume V of Alexandre Dumas' Celebrated Crimes, he recounts the history of Antoine François Desrues, who killed a noblewoman, Madame de Lamotte, with "corrosive sublimate".[20]
• In 1906, in New York, Richard Tilghman died after mistaking bichloride of mercury tablets for lithium citrate tablets.[21]
• In one highly publicized case in 1920, "mercury bichloride" was reported to have caused the death of 25-year-old American silent-film star Olive Thomas. While vacationing in France and staying at the Hôtel Ritz in Paris, she accidentally (or perhaps intentionally) ingested the compound, which had been prescribed to her husband Jack Pickford in liquid topical form to treat his "chronic syphilis". Thomas died five days later.[22][23]
• Mercuric chloride was used by Madge Oberholtzer to commit suicide after she was kidnapped, raped, and tortured by Ku Klux Klan leader D.C. Stephenson. Oberholtzer died from a combination of mercury poisoning and staph infection, the latter caused by Stephenson biting her during the assault.[24]
• Ana María Cires, a young wife of Uruguayan writer Horacio Quiroga, committed suicide by poisoning herself. After a violent fight with the writer, she ingested a fatal dose of "sublimado", or Mercury(II) chloride. She endured terrible agony for eight days before dying on December 14, 1915.[25]
• Ruth L. Truffant's death was called a suicide after she succumbed to the effects of Bichloride of mercury poisoning on 26 April 1914.[26][27]